Reference Ground
Quiescent Voltage
Reset
CS53L32A
16
REF_GND (Input) - Ground reference for the internal sampling circuits. Must
be connected to ground.
19
VQ (Output) - Filter connection for internal A/D converter quiescent refer-
ence voltage. A capacitor must be connected from VQ to ground. VQ is not
intended to supply external current. VQ has a typical source impedance of
250 kΩ and any current drawn from this pin will alter device performance.
20
RST (Input) - The device enters a low power mode and all internal registers
are reset to their default settings, including the control port, when low. When
high, the control port becomes operational and the PDN bit must be cleared
before normal operation will occur. The control port cannot be accessed
when Reset is low.
DS513F1
29