CL-PS7111
Low-Power System-on-a-Chip
The output channel is fed by an 8-bit shift register, and the input channel is captured by a 16-bit shift reg-
ister. The clock and synchronization pulses are activated by a write to the Output Shift register. During
transfers, the SSIBUSY is set. When the transfer is complete and valid data is in the 16-bit read shift reg-
ister, the SSEOTI interrupt is asserted and the SSIBUSY bit is cleared.
An additional sample clock (SMPCLK) is enabled independently and set at twice the transfer clock fre-
quency. This interface has no local buffering capabilities and is only intended to be used with low-band-
width interfaces (such as a touchscreen ADC interface).
42
FUNCTIONAL DESCRIPTION
September 1997
PRELIMINARY DATA BOOK v2.0