PC48F2000P0VB00 View Datasheet(PDF) - Intel

Part Name

Description

MFG CO.

PC48F2000P0VB00

Intel StrataFlash® Embedded Memory

Intel 

1-Gbit P30 Family

Figure 29. Example Latency Count Setting using Code 3

CLK

CE#

ADV#

A[MAX:0]

D[15:0]

0

1

2

Code 3

Address

High-Z

R103

tData

3

4

Data

10.3.3

10.3.3.1

WAIT Polarity

The WAIT Polarity bit (WP), RCR[10] determines the asserted level (VOH or VOL) of WAIT.

When WP is set, WAIT is asserted high (default). When WP is cleared, WAIT is asserted low.

WAIT changes state on valid clock edges during active bus cycles (CE# asserted, OE# asserted,

RST# deasserted).

WAIT Signal Function

The WAIT signal indicates data valid when the device is operating in synchronous mode

(RCR[15]=0). The WAIT signal is only “deasserted” when data is valid on the bus.

When the device is operating in synchronous non-array read mode, such as read status, read ID, or

read query. The WAIT signal is also “deasserted” when data is valid on the bus.

WAIT behavior during synchronous non-array reads at the end of word line works correctly only

on the first data access.

When the device is operating in asynchronous page mode, asynchronous single word read mode,

and all write operations, WAIT is set to a deasserted state as determined by RCR[10]. See Figure

17, “Asynchronous Single-Word Read (ADV# Latch)” on page 38, and Figure 18, “Asynchronous

Page-Mode Read Timing” on page 39.

Datasheet

Intel StrataFlash® Embedded Memory (P30)

Order Number: 306666, Revision: 001

April 2005

57

Share Link: