STM32F103VB 데이터 시트보기 (PDF) - STMicroelectronics

부품명

상세내역

제조사

STM32F103VB

Performance line, ARM-based 32-bit MCU with Flash, USB, CAN, seven 16-bit timers, two ADCs and nine communication interfaces

STMicroelectronics 

Electrical characteristics

STM32F103xx

Input/output AC characteristics

The definition and values of input/output AC characteristics are given in Figure 16 and

Table 31, respectively.

Unless otherwise specified, the parameters given in Table 31 are derived from tests

performed under ambient temperature and VDD supply voltage conditions summarized in

Table 7.

Table 31. I/O AC characteristics(1)

I/O

mode(1)

Symbol

Parameter

Conditions

Min Max Unit

fmax(IO)out Maximum frequency(2)

CL = 50 pF, VDD = 2 V to 3.6 V

10

tf(IO)out

Output high to low level fall

time(3)

tr(IO)out

Output low to high level

rise time(3)

CL = 50 pF, VDD = 2 V to 3.6 V

fmax(IO)out Maximum frequency(2)

CL = 50 pF, VDD = 2 V to 3.6 V

01

tf(IO)out

Output high to low level fall

time(3)

tr(IO)out

Output low to high level

rise time(3)

CL = 50 pF, VDD = 2 V to 3.6 V

2 MHz

125

ns

125

10 MHz

25

ns

25

Fmax(IO)out Maximum frequency(2)

CL = 30 pF, VDD = 2.7 V to 3.6 V

CL = 50 pF, VDD = 2.7 V to 3.6 V

50 MHz

30 MHz

CL = 50 pF, VDD = 2 V to 2.7 V

20 MHz

CL = 30 pF, VDD = 2.7 V to 3.6 V

11

tf(IO)out

Output high to low level fall

time(3)

CL = 50 pF, VDD = 2.7 V to 3.6 V

CL = 50 pF, VDD = 2 V to 2.7 V

tr(IO)out

Output low to high level

rise time(3)

CL = 30 pF, VDD = 2.7 V to 3.6 V

CL = 50 pF, VDD = 2.7 V to 3.6 V

CL = 50 pF, VDD = 2 V to 2.7 V

5

8

12

ns

5

8

12

Pulse width of external

-

tEXTIpw signals detected by the

EXTI controller

10

ns

1. Refer to the Reference user manual UM0306 for a description of GPIO Port configuration register.

2. The maximum frequency is defined in Figure 16.

3. Values based on design simulation and validated on silicon, not tested in production.

46/67

Share Link: