STM32L4P5G-DK Hoja de datos - STMicroelectronics

Description
   The STM32L4P5G-DK Discovery kit is a complete demonstration and development platform for the STMicroelectronics Arm® Cortex®-M4 core-based STM32L4P5AGI6PU microcontroller with four I2C buses, three SPI and six USART ports, CAN port, two SAI ports, 12-bit ADC, 12-bit DAC, internal 320-Kbyte SRAM and 1-Mbyte Flash memory, two Octo-SPI memory interfaces, touch-sensing capability, USB OTG FS port, LCD-TFT controller, flexible memory controller (FMC), 8- to 14-bit DCMI interface and JTAG debugging support.

FEATUREs
• STM32L4P5AGI6PU Arm® Cortex® core-based microcontroller featuring
   1 Mbyte of Flash memory and 320 Kbytes of RAM in UFBGA169 package
• 240x240 64-bit color LCD with RGB interface (connector only)
• 4-Gbyte onboard eMMC
• On-board current measurement
• SAI audio codec (footprint only)
• ST-MEMS digital microphone (footprint only)
• 512-Mbit Octo-SPI NOR Flash memory with DDR mode
• 64-Mbit Octo-SPI PSRAM memory with DDR mode
• 2 user LEDs
• Reset buttons
• 4-direction joystick with a selection button
• Board connectors:
   – Camera (8-bit) (footprint only)
   – Stereo headset jack (footprint only)
   – USB with Micro-AB
   – User interface through USB Virtual COM port
   – Arm® Cortex® 10-pin 1.27 mm-pitch debug connector over STDC14
      footprint
   – ARDUINO® Uno V3 expansion connector
   – STMod+ expansion connector
• Flexible power-supply options:
   – ST-LINK USB VBUS, USB OTG connector, or external sources
• On-board STLINK-V3E debugger/programmer with USB re-enumeration
   capability: mass storage, Virtual COM port, and debug port
• Microcontroller supply voltage: fixed 3.3 V and extern SMPS to generate Vcore
   logic supply
• Comprehensive free software libraries and examples available with the
   STM32CubeL4 MCU Package
• Support of a wide choice of Integrated Development Environments (IDEs)
   including IAR™, Keil®, and GCC-based IDEs