TSA5526AT/C2 Datasheet - Philips Electronics

GENERAL DESCRIPTION
The device is a single-chip PLL frequency synthesizer designed for TV and VCR tuning systems. The circuit consists of a divide-by-eight prescaler with its own preamplifier, a 15-bit programmable divider, a crystal oscillator and its programmable reference divider and a phase/frequency detector combined with a charge-pump which drives the tuning amplifier and the 33 V output. Four high-current PNP band switch buffers are provided for band switching. Two PNP buffers can be switched on simultaneously. The sum of the collector currents is limited to 50 mA.

FEATURES
• Complete 1.3 GHz single chip system
• Four PNP band switch buffers (40 mA)
• 33 V output tuning voltage
• In-lock detector
• 5-step ADC
• 15-bit programmable divider
• Programmable reference divider ratio (512, 640 or 1024)
• Programmable charge-pump current (60 or 280 µA)
• Programmable automatic charge-pump current switch
• Varicap drive disable
• Universal bus protocol I2C-bus or 3-wire bus:
    – bus protocol for 18 or 19 bits transmission (3-wire bus)
    – extra protocol for 27 bits for test and features (3-wire bus)
    – address plus 4 data bytes transmission (I2C-bus write mode)
    – address plus 1 status byte transmission (I2C-bus read mode)
    – three independent I2C-bus addresses
• Low power and low radiation.

APPLICATIONS
• TV tuners and front ends
• VCR tuners.