STLVD111(2002) Datasheet - STMicroelectronics

Description
The STLVD111 is a low skew programmable 1 to 10 differential LVDS driver, designed for clock distribution. The select signal is fanned out to 10 identical differential outputs.
The STLVD111 is provided with a 11 bit shift register with a serial in and a Control Register. The purpose is to enable or power off each output clock channel and to select the clock input.
The STLVD111 is specifically designed, modelled and produced with low skew as the key goal. Optimal design and layout serve to minimize gate to gate skew within a device. The net result is a dependable guaranteed low skew device.
The STLVD111 can be used for high performance clock distribution in 2.5V systems with LVDS levels. Designers can take advantage of the device’s performance to distribute low skew clocks across the backplane or the board.

■ 100ps PART-TO PART SKEW
■ 50ps BANK SKEW
■ DIFFERENTIAL DESIGN
■ MEETS LVDS SPEC. FOR DRIVER OUTPUTS AND RECEIVER INPUTS
■ REFERENCE VOLTAGE AVAILABLE OUTPUT VBB
■ LOW VOLTAGE VCC RANGE OF 2.375V TO 2.625V
■ HIGH SIGNALLING RATE CAPABILITY (EXCEEDS 622MHz)
■ SUPPORT OPEN, SHORT AND TERMINATED INPUT FAIL-SAFE (LOW OUTPUT STATE)
■ PROGRAMMABLE DRIVERS POWER OFF CONTROL