SST26WF040BA-104I/NP Datasheet - Microchip Technology

Product Description
   The Serial Quad I/O™ (SQI™) family of flash-memory devices features a six-wire, 4-bit I/O interface that allows for low-power, high-performance operation in a low pin-count package. SST26WF040B/040BA and SST26WF080B/ 080BA also support full command-set compatibility to traditional Serial Peripheral Interface (SPI) protocol. System designs using SQI flash devices occupy less board space and ultimately lower system costs.

FEATUREs
• Single Voltage Read and Write Operations
   - 1.65-1.95V
• Serial Interface Architecture
   - Mode 0 and Mode 3
   - Nibble-wide multiplexed I/O’s with SPI-like serial
      command structure
   - x1/x2/x4 Serial Peripheral Interface (SPI) Protocol
• High Speed Clock Frequency
   - 104 MHz max
• Burst Modes
   - Continuous linear burst
   - 8/16/32/64 Byte linear burst with wrap-around
• Superior Reliability
   - Endurance: 100,000 Cycles (min)
   - Greater than 100 years Data Retention
• Low Power Consumption:
   - Active Read current: 15 mA (typical @ 104 MHz)
   - Standby current: 10 µA (typical)
   - Deep Power-Down current: 1.8 µA (typical)
• Fast Erase Time
   - Sector/Block Erase: 18 ms (typ), 25 ms (max)
   - Chip Erase: 35 ms (typ), 50 ms (max)
• Page-Program
   - 256 Bytes per page in x1 or x4 mode
• End-of-Write Detection
   - Software polling the BUSY bit in status register
• Flexible Erase Capability
   - Uniform 4 KByte sectors
   - Four 8 KByte top and bottom parameter overlay
      blocks
   - One 32 KByte top and bottom overlay block
   - Uniform 64 KByte overlay blocks
• Write-Suspend
   - Suspend Program or Erase operation to access
      another block/sector
• Software Reset (RST) mode
• Software Write Protection
   - Individual-Block Write Protection with permanent
      lock-down capability
      - 64 KByte blocks, two 32 KByte blocks, and
         eight 8 KByte parameter blocks
      - Read Protection on top and bottom 8 KByte
         parameter blocks
• Security ID
   - One-Time Programmable (OTP) 2 KByte,
      Secure ID
      - 64 bit unique, factory pre-programmed identifier
      - User-programmable area
• Temperature Range
   - Industrial: -40°C to +85°C
• Packages Available
   - 8-contact WDFN (6mm x 5mm)
   - 8-lead SOIC (150 mil)
   - 8-contact USON (2mm x 3mm)
   - 8-ball XFBGA (Z-Scale™)
• All devices are RoHS compliant