SMM605 Datasheet - Summit Microelectronics

INTRODUCTION
   The SMM605 actively controls the output voltage level of up to six DC/DC converters that use a ‘Trim’ or ‘VADJ/FB’ pin to adjust the output. An Active DC Output Control (ADOCTM) feature is used during normal operation to maintain extremely accurate settings of supply voltages and, during system test, to control margining of the supplies using the industry standard I2C 2-wire data bus commands. Total accuracy with a ±0.1% external reference is ±0.2%, and ±0.5% using the internal reference. The device can margin supplies with either positive or negative trim pin control within a range of 0.35V to VDD. The SMM605 supply can range from 2.7V to 5.5V or 6V to
14V to accommodate any intermediate bus supply.

FEATURES & APPLICATIONS
• Extremely accurate (±0.1% Typ.) Active
   DC Output Control (ADOCTM)
• Six channel control of DC/DC converters
• ADOC Automatically adjusts supply output
   voltage level under all DC load conditions
• Capable of margining supplies with trim inputs
   using either positive or negative trim pin control
• Wide Margin/ADOC range from 0.35V to VDD
• Uses either an internal or external VREF
• Operates from any intermediate bus supply
   from 8V to 15V and from 2.7V to 5.5V
• Programmable START and READY pins
• General Purpose 4k EEPROM with Write Protect
• I2C 2-wire serial bus for programming
   configuration and monitoring status.
• 48 lead TQFP package

APPLICATIONs
• Monitor/Control Distributed and POL Supplies
• Multi-voltage Processors, DSPs, ASICs used in
   Telecom, CompactPCI or server systems