SMB138 Datasheet - Summit Microelectronics

INTRODUCTION
The SMB138 is a programmable single-cell lithium-ion/lithium-polymer battery charger designed for a variety of portable applications. The device provides a simple and efficient way to charge high-capacity LiIon batteries via a USB or AC adapter input. Unlike conventional devices, the SMB138’s high-efficiency, switch-mode operation eliminates the thermal problems of conventional linear solutions. Also the buck converter architecture effectively multiplies the input current to increase charge rate for the Li+ cell and uses current limited supplies like USB more efficiently. The SMB138 also supports USB On-the-Go devices by providing the required USB-OTG +5V power supply using the Li-Ion battery as a source.

FEATURES & APPLICATIONS
• USB or AC input with programmable input current limiting
• Up to 1.25A continuous charging current from AC adapter
• Up to 750mA charging current from 500mA USB port using automatic TurboCharge™ mode
• +4.35 to +6.2V input voltage range (+16V tolerant)
• Two product options:
   o SMB138A: charger off until I2C command initiation, enable/disable control via I2C
   o SMB138C: charger powers up in charging mode, enable/disable control via I2C
• USB “On-the-Go” Power support for USB OTG enabled devices (+5V reverse output @ 200mA)
• Reverse current blocking (<5uA)
• High-efficiency 3MHz voltage-mode step-down regulator
• Integrated frequency compensation
• Internal power MOSFETs and precision current sensing
• High-accuracy float voltage regulation: 1%
• Thermal regulation (current foldback)
• Trickle charging
• Pre-charge and complete-charge (36/240min) safety timers
• Digital programming of all major parameters via I2C interface
   o Fast charge voltage threshold, float voltage
   o Pre-charge, fast charge, termination current
• Status register monitors and flags charger operation
   o Charge in-progress/termination
   o Charge timer fault
   o OC/UV/OV detection/shutdown
• uCSP-19 lead-free package (0.4mm ball pitch)

APPLICATIONs
• 2.5/3/3G+ GSM/CDMA/WCDMA Phones
• Smartphones/PDAs
• Portable Media Players
• Portable GPS Terminals