PIC16LF84A-04I/SO Datasheet - Microchip Technology

DEVICE OVERVIEW
This document contains device specific information for the operation of the PIC16F84A device. Additional information may be found in the PICmicro™ Mid Range Reference Manual, (DS33023), which may be downloaded from the Microchip website. The Refer ence Manual should be considered a complementary document to this data sheet, and is highly recom mended reading for a better understanding of the device architecture and operation of the peripheral modules.

High Performance RISC CPU Features:
• Only 35 single word instructions to learn
• All instructions single-cycle except for program branches which are two-cycle
• Operating speed: DC - 20 MHz clock input DC - 200 ns instruction cycle
• 1024 words of program memory
• 68 bytes of Data RAM
• 64 bytes of Data EEPROM
• 14-bit wide instruction words
• 8-bit wide data bytes
• 15 Special Function Hardware registers
• Eight-level deep hardware stack
• Direct, indirect and relative addressing modes
• Four interrupt sources:
  - External RB0/INT pin
  - TMR0 timer overflow
  - PORTB<7:4> interrupt-on-change
  - Data EEPROM write complete

Peripheral Features:
• 13 I/O pins with individual direction control
• High current sink/source for direct LED drive
  - 25 mA sink max. per pin
  - 25 mA source max. per pin
• TMR0: 8-bit timer/counter with 8-bit programmable prescaler

Special Microcontroller Features:
• 10,000 erase/write cycles Enhanced FLASH Program memory typical
• 10,000,000 typical erase/write cycles EEPROM Data memory typical
• EEPROM Data Retention > 40 years
• In-Circuit Serial Programming™ (ICSP™) - via two pins
• Power-on Reset (POR), Power-up Timer (PWRT), Oscillator Start-up Timer (OST)
• Watchdog Timer (WDT) with its own On-Chip RC Oscillator for reliable operation
• Code protection
• Power saving SLEEP mode
• Selectable oscillator options