MC9S08DZ16F1CLC Datasheet - Freescale Semiconductor

Device Overview
   MC9S08DZ60 Series devices provide significant value to customers looking to combine Controller Area Network (CAN) and embedded EEPROM in their applications. This combination will provide lower costs, enhanced performance, and higher quality.

8-Bit HCS08 Central Processor Unit (CPU)
• 40-MHz HCS08 CPU (20-MHz bus)
• HC08 instruction set with added BGND instruction
• Support for up to 32 interrupt/reset sources

On-Chip Memory
• Flash read/program/erase over full operating voltage and
   temperature
   — MC9S08DZ60 = 60K
   — MC9S08DZ48 = 48K
   — MC9S08DZ32 = 32K
   — MC9S08DZ16 = 16K
• Up to 2K EEPROM in-circuit programmable memory;
   8-byte single-page or 4-byte dual-page erase sector;
   Program and Erase while executing Flash; Erase abort
• Up to 4K random-access memory (RAM)

Power-Saving Modes
• Two very low power stop modes
• Reduced power wait mode
• Very low power real time interrupt for use in run, wait,
   and stop

Clock Source Options
• Oscillator (XOSC) — Loop-control Pierce oscillator;
   Crystal or ceramic resonator range of 31.25 kHz to
   38.4 kHz or 1 MHz to 16 MHz
• Multi-purpose Clock Generator (MCG) — PLL and
   FLL modes (FLL capable of 1.5% deviation using
   internal temperature compensation); Internal reference
   clock with trim adjustment (trimmed at factory, with
   trim value stored in flash); External reference with
   oscillator/resonator options

System Protection
• Watchdog computer operating properly (COP) reset
   with option to run from backup dedicated 1-kHz internal
   clock source or bus clock
• Low-voltage detection with reset or interrupt; selectable
   trip points
• Illegal opcode detection with reset
• Illegal address detection with reset
• Flash block protect
• Loss-of-lock protection
(Continue ...)