74VCX162240 Datasheet - STMicroelectronics

DESCRIPTION
The 74VCX162240 is a low voltage CMOS 16 BIT BUS BUFFER (INVERTED) fabricated with sub-micron silicon gate and five-layer metal wiring C2MOS technology. It is ideal for low power and very high speed 1.8 to 3.6V applications; it can be interfaced to 3.6V signal environment for both inputs and outputs.
Any nG output control governs four BUS BUFFERS. Output Enable input (nG) tied together gives full 16-bit operation.
When nG is LOW, the outputs are on. When nG is HIGH, the output are in high impedance state.
This device is designed to be used with 3 state memory address drivers, etc.
The device circuits is including 26Ω series resistance in the outputs. These resistors permit to reduce line noise in high speed applications.
All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage.

■ 3.6V TOLERANT INPUTS AND OUTPUTS
■ HIGH SPEED :
   tPD = 3.4 ns (MAX.) at VCC = 3.0 to 3.6V
   tPD = 3.8 ns (MAX.) at VCC = 2.3 to 2.7V
   tPD = 5.7 ns (MAX.) at VCC = 1.8V
■ POWER DOWN PROTECTION ON INPUTS AND OUTPUTS
■ SYMMETRICAL OUTPUT IMPEDANCE:
   |IOH| = IOL = 12mA (MIN) at VCC = 3.0V
   |IOH| = IOL = 8mA (MIN) at VCC = 2.3V
   |IOH| = IOL = 4mA (MIN) at VCC = 1.8V
■ 26Ω SERIE RESISTORS IN OUTPUTS
■ OPERATING VOLTAGE RANGE: VCC(OPR) = 1.8V to 3.6V
■ PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 162240
■ LATCH-UP PERFORMANCE EXCEEDS 300mA (JESD 17)
■ ESD PERFORMANCE:
   HBM > 2000V (MIL STD 883 method 3015);
   MM > 200V