6.9.8.
Bits
31:01
00
RTL8111C
Datasheet
Vector Control for MSI-X Table Entries
Table 22. Vector Control for MSI-X Table Entries
RW
Field
Description
RW
Reserved After reset, the state of these bits must be 0. However, for potential future use,
software must preserve the value of these reserved bits when modifying the value
of other Vector Control bits. If software modifies the value of these reserved bits,
the result is undefined.
RW
Mask Bit When this bit is set, the function is prohibited from sending a message using this
MSI-X Table entry. However, any other MSI-X Table entries programmed with
the same vector will still be capable of sending an equivalent message unless they
are also masked. This bit’s state after reset is 1 (entry is masked). This bit is
read/write.
6.9.9.
Bits
63:00
Pending Bits for MSI-X PBA Entries
Table 23. Pending Bits for MSI-X PBA Entries
RW
Field
Description
RW Pending Bits For each Pending Bit that is set, the function has a pending message for the
associated MSI-X Table entry. Pending bits that have no associated MSI-X Table
entry are reserved. After reset, the state of reserved Pending bits must be 0.
Software should never write, and should only read Pending Bits. If software
writes to Pending Bits, the result is undefined.
Each Pending Bit’s state after reset is 0 (no message pending). These bits are
permitted to be read only or read/write.
6.10. Receive-Side Scaling (RSS)
The RTL8111C is compliant with the new Network Driver Interface Specification (NDIS) 6.0
Receive-Side Scaling (RSS) technology for the Microsoft Windows family of operating systems. RSS
allows packet receive-processing from a network adapter to be balanced across the number of available
computer processors, increasing performance on multi CPU platforms.
6.10.1. Receive-Side Scaling (RSS) Initialization
During RSS initialization, the Windows operating system will inform the RTL8111C to store the
following parameters: hash function, hash type, hash bits, indirection table, BaseCPUNumber, and the
secret hash key.
Hash Function
The default hash function is the Toeplitz hash function.
Integrated Gigabit Ethernet Controller for PCI Express
23
Track ID: JATR-1076-21 Rev. 1.5