M45PE10-VMN6TP View Datasheet(PDF) - Numonyx -> Micron

Part Name

Description

MFG CO.

M45PE10-VMN6TP

1-Mbit, page-erasable serial flash memory with byte-alterability and 75 MHz SPI bus interface

Numonyx -> Micron 

Initial delivery state

8

Initial delivery state

M45PE10

The device is delivered with the memory array erased: all bits are set to ‘1’ (each byte

contains FFh). All usable status register bits are 0.

9

Maximum ratings

Stressing the device outside the ratings listed in Table 7: Absolute maximum ratings may

cause permanent damage to the device. These are stress ratings only, and operation of the

device at these, or any other conditions outside those indicated in the operating sections of

this specification, is not implied. Exposure to absolute maximum rating conditions for

extended periods may affect device reliability.

Table 7. Absolute maximum ratings

Symbol

Parameter

Min.

Max. Unit

TSTG

TLEAD

Storage temperature

Lead temperature during soldering

–65

150

°C

See note (1)

°C

VIO

Input and output voltage (with respect to ground)

–0.6 VCC + 0.6 V

VCC

Supply voltage

–0.6

4.0

V

VESD Electrostatic discharge voltage (human body model) (2) –2000

2000

V

1. Compliant with JEDEC Std J-STD-020C (for small body, Sn-Pb or Pb assembly), the Numonyx

ECOPACK® 7191395 specification, and the European directive on Restrictions on Hazardous Substances

(RoHS) 2002/95/EU.

2. JEDEC Std JESD22-A114A (C1=100 pF, R1=1500 Ω, R2=500 Ω).

34/47

Share Link: