CS8900A
Crystal LAN™ ISA Ethernet Controller
Interrupt Enable Bit
(register name)
Event Bit or Counter
(register name)
ExtradataiE (RxCFG)
RuntiE (RxCFG)
CRCerroriE (RxCFG)
RxOKiE (RxCFG)
Extradata (RxEvent)
Runt (RxEvent)
CRCerror (RxEvent)
RxOK (RxEvent)
16colliE (TxCFG)
16coll (TxEvent)
AnycolliE (TxCFG)
“Number-of Tx-collisions”
counter is incremented
(TxEvent)
JabberiE (TxCFG)
Jabber (TxEvent)
Out-of-windowiE (TxCFG) Out-of-window (TxEvent)
TxOKiE (TxCFG)
TxOK (TXEvent)
SQEerroriE (TxCFG)
SQEerror (TxEvent)
Loss-of-CRSiE (TxCFG) Loss-of-CRS (TxEvent)
event occurs, but then does not accept the receive
frame (the length of the receive frame is set to ze-
ro).
The other five Accept bits in RxCTL are used for
destination address filtering (see Section 5.3 on
page 86). The Accept mechanism is explained in
more detail in Section 5.2 on page 78.
4.4.4 Status and Control Register Summary
The table on the following page (Table 15) pro-
vides a summary of the Status and Control regis-
ters. Section 4.4.4 on page 48 gives a detailed
description of each Status and Control register.
MissOvfloiE (BufCFG)
TxColOvfloiE (BufCFG)
RxDestiE (BufCFG)
Rx128iE (BufCFG)
RxMissiE (BufCFG)
TxUnderruniE (BufCFG)
Rdy4TxiE (BufCFG)
RxDMAiE (BufCFG)
RxMISS counter over-
flows past 1FFh
TxCOL counter overflows
past 1FFh
RxDest (BufEvent)
Rx128 (BufEvent)
RxMISS (BufEvent)
TxUnderrun (BufEvent)
Rdy4Tx (BufEvent)
RxDMAFrame (BufEvent)
Table 14. Interrupt Enable Bits and Events
operations. It is possible to set either, neither, or
both bits. The four corresponding pairs of bits are:
IE Bit in RxCFG
ExtradataiE
RuntiE
CRCerroriE
RxOKiE
A Bit in RxCTL
ExtradataA
RuntA
CRCerrorA
RxOKA
If one of the above Interrupt Enable bits is set and
the corresponding Accept bit is clear, the CS8900A
generates an interrupt when the associated receive
CIRRUS LOGIC PRODUCT DATASHEET
48
DS271PP4