M25PE10-VMN6G View Datasheet(PDF) - STMicroelectronics

Part Name

Description

MFG CO.

M25PE10-VMN6G

1 and 2 Mbit, low voltage, Page-Erasable Serial Flash memories with Byte-Alterability, 50 MHz SPI bus, standard pinout

STMicroelectronics 

DC and AC parameters

11 DC and AC parameters

M25PE20, M25PE10

This section summarizes the operating and measurement conditions, and the DC and AC

characteristics of the devices. The parameters in the DC and AC Characteristic tables that

follow are derived from tests performed under the Measurement Conditions summarized in

the relevant tables. Designers should check that the operating conditions in their circuit

match the measurement conditions when relying on the quoted parameters.

Table 16. Operating conditions

Symbol

Parameter

Min.

Max.

VCC Supply Voltage

TA

Ambient Operating Temperature

2.7

3.6

–40

85

Table 17. AC measurement conditions

Symbol

Parameter

Min.

Max.

CL

Load Capacitance

Input Rise and Fall Times

30

5

Input Pulse Voltages

Input and Output Timing Reference Voltages

0.2VCC to 0.8VCC

0.3VCC to 0.7VCC

1. Output Hi-Z is defined as the point where data out is no longer driven.

Figure 26. AC measurement I/O waveform

Input Levels

0.8VCC

0.2VCC

Input and Output

Timing Reference Levels

0.7VCC

0.3VCC

AI00825B

Unit

V

°C

Unit

pF

ns

V

V

Table 18. Capacitance(1)

Symbol

Parameter

Test condition

COUT Output Capacitance (Q)

VOUT = 0V

CIN

Input Capacitance (other pins)

VIN = 0V

1. Sampled only, not 100% tested, at TA=25°C and a frequency of 20MHz.

Min. Max. Unit

8

pF

6

pF

48/60

Share Link: