M25PE10-VMN6G View Datasheet(PDF) - STMicroelectronics
Part Name
Description
MFG CO.
M25PE10-VMN6G
STMicroelectronics
M25PE10-VMN6G Datasheet PDF : 60 Pages
| |||
M25PE20, M25PE10
9
Initial delivery state
Initial delivery state
The device is delivered with the memory array erased: all bits are set to 1 (each Byte
contains FFh). All usable Status Register bits are 0.
10 Maximum rating
Stressing the device above the rating listed in the Absolute Maximum Ratings table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the Operating sections of
this specification is not implied. Exposure to Absolute Maximum Rating conditions for
extended periods may affect device reliability. Refer also to the STMicroelectronics SURE
Program and other relevant quality documents.
Table 15. Absolute maximum ratings
Symbol
Parameter
Min.
Max. Unit
TSTG
TLEAD
Storage Temperature
Lead Temperature during Soldering
–65
150
°C
See note (1)
°C
VIO
Input and Output Voltage (with respect to Ground)
–0.6 VCC + 0.6 V
VCC
Supply Voltage
–0.6
4.0
V
VESD Electrostatic Discharge Voltage (Human Body model)(2) –2000
2000
V
1. Compliant with JEDEC Std J-STD-020C (for small body, Sn-Pb or Pb assembly), the ST ECOPACK®
7191395 specification, and the European directive on Restrictions on Hazardous Substances (RoHS)
2002/95/EU.
2. JEDEC Std JESD22-A114A (C1 = 100 pF, R1 = 1500 Ω, R2 = 500 Ω)
47/60
Share Link: 