C8051F362-GM View Datasheet(PDF) - Silicon Laboratories

Part Name

Description

MFG CO.

C8051F362-GM

Mixed Signal ISP Flash MCU Family

Silicon Laboratories 

C8051F360/1/2/3/4/5/6/7/8/9

Table 3.1. Global Electrical Characteristics (Continued)

–40 to +85 °C, 25 MHz system clock unless otherwise specified.

Parameter

Conditions

Min Typ Max Units

Digital Supply Current—CPU Inactive (Idle Mode, not fetching instructions from Flash)

IDD2

VDD = 3.6 V, F = 100 MHz

— 36 40 mA

VDD = 3.6 V, F = 25 MHz

— 9 12 mA

VDD = 3.0 V, F = 100 MHz

— 30 35 mA

VDD = 3.0 V, F = 25 MHz

—7 9

mA

VDD = 3.0 V, F = 1 MHz

— 0.24 — mA

VDD = 3.0 V, F = 80 kHz

— 19 —

µA

IDD Supply Sensitivity3

F = 25 MHz

F = 1 MHz

— 44 — %/V

— 43.7 — %/V

IDD Frequency Sensitivity3,5 VDD = 3.0 V, F <= 1 MHz, T = 25 °C

VDD = 3.0 V, F > 1 MHz, T = 25 °C

— 0.24 — mA/MHz

— 0.25 — mA/MHz

VDD = 3.6 V, F <= 1 MHz, T = 25 °C

— 0.31 — mA/MHz

VDD = 3.6 V, F > 1 MHz, T = 25 °C

— 0.32 — mA/MHz

Digital Supply Current

(Stop Mode, shutdown)

Oscillator not running,

VDD Monitor Disabled

— < 0.1 —

µA

Notes:

1. SYSCLK must be at least 32 kHz to enable debugging.

2. SYSCLK is the internal device clock. For operational speeds in excess of 30 MHz, SYSCLK must be derived

from the Phase-Locked Loop (PLL).

3. Based on device characterization data; Not production tested.

4. IDD can be estimated for frequencies < 20 MHz by simply multiplying the frequency of interest by the frequency

sensitivity number for that range. When using these numbers to estimate IDD for >20 MHz, the estimate should

be the current at 25 MHz minus the difference in current indicated by the frequency sensitivity number. For

example: VDD = 3.0 V; F = 20 MHz, IDD = 15.9 mA - (25 MHz - 20 MHz) * 0.38 mA/MHz = 14 mA.

5. Idle IDD can be estimated for frequencies < 1 MHz by simply multiplying the frequency of interest by the

frequency sensitivity number for that range. When using these numbers to estimate Idle IDD for >1 MHz, the

estimate should be the current at 25 MHz minus the difference in current indicated by the frequency sensitivity

number. For example: VDD = 3.0 V; F = 5 MHz, Idle IDD = 7.2 mA - (25 MHz - 5 MHz) * 0.25 mA/MHz = 2.2 mA.

Other electrical characteristics tables are found in the data sheet section corresponding to the associated

peripherals. For more information on electrical characteristics for a specific peripheral, refer to the page

indicated in Table 3.2.

34

Rev. 1.0

Share Link: