Serial communication format
13 Serial communication format
STFPC311
Caution:
When data is read, a wait time (tWAIT) of 1 μs is necessary within the rising edge of the
eighth clock that has set the command, and the falling edge of the first clock that has read
the data. This is required by the STFPC311 to process its internal commands/data (See
Figure 30)
Care must be taken to connect an external pull-up resistor to this pin (1 kΩ to 10 kΩ)
because the DOUT pin is an N-channel, open drain output pin (see Figure 31).
Figure 30. Reception (command/data WRITE)
Obsolete Product(s) Figure 31. Data transmission (data READ) - Obsolete Product(s)
32/39
Doc ID 12324 Rev 2