P/N + Description + Content Search

Description
The device linear regulator is designed to provide the transient peaks up to 2A sourcing or sinking capability for DDR(Double Data Rate) SDRAM bus termination application. The output voltage can track half of input power by two external voltage divider resistors.

Features
 1. Power MOSFET Integrated
 2. Low Output Voltage Offset
 3. Current Limiting Protection
 4. Thermal Shutdown Protection
 5. Adjusted Output by External Resistors
 6. Shutdown for Standby or Suspend Mode

DESCRIPTION

The UTC LP2950/2951 is a monolithic Integrated voltage regulator with low dropout voltage, and low quiescent current. It includes many features that suitable for different applications. Available in 3-PIN TO-92, DIP-8 and SOP-8 packages.

FEATURES

*High accuracy 2.5, 3.0, 3.3, 3.6 or 5V fixed output for  TO-92, SOP-8 package.

*Extremely low quiescent current and dropout voltage.

*Extremely tight load and line regulation.

*Current and thermal limiting.

*Very low temperature coefficient.

*Logic controlled shutdown and error flag available for DIP  and SOP package.

*Output voltage programmable for DIP and SOP package.

DESCRIPTION
The Contek LM2954 is a monolithic Integrated voltage regulator with low dropout voltage, and low quiescent current. It includes many features that suitable for different applications.
Available in 3-PIN TO- 92 ,DIP-8 and SOP-8 packages.

FEATURES
* High accuracy 3.0, 3.3, 3.7 or 5V fixed output for TO-92, DIP-8 and SOP-8 package.
* Extremely low quiescent current and dropout voltage.
* Extremely tight load and line regulation.
* Current and thermal limiting.
* Very low temperature coefficient.
* Logic controlled shutdown and error flag available for DIP and SOP package.
* Output voltage programmable for DIP and SOP package.

APPLICATIONS
* Battery powered equipment.
* High efficient linear regulator down to 1.24V.
* Cellular phones.

DESCRIPTION
The UTC LM2954 is a monolithic Integrated voltage regulator with low dropout voltage, and low quiescent current. It includes many features that suitable for different applications.
Available in 3-PIN TO-92,DIP-8,SOP-8 and SOT-223 packages.

FEATURES
* High accuracy 3.3, 5V fixed output for TO-92, DIP-8 and SOP-8 package.
* Extremely low quiescent current and dropout voltage.
* Extremely tight load and line regulation.
* Current and thermal limiting.
* Very low temperature coefficient.
* Logic controlled shutdown and error flag available for DIP and SOP package.
* Output voltage programmable for DIP and SOP package.

APPLICATIONS
* Battery powered equipment.
* High efficient linear regulator down to 1.24V.
* Cellular phones.

DESCRIPTION

PS7241-AT1 and PS7241-AT5 are solid state relays containing a GaAs LED on the emitting side (input side) and MOSFETs (+ Phototransistor) on the output side. They are suitable for analog signal control because of their low offset and high linearity.

FEATURES

• 2 CHANNEL TYPE:

   OCMOS FET + PHOTOCOUPLER

• DESIGNED FOR AC/DC SWITCHING LINE CHANGER

• SMALL PACKAGE:

   8-PIN SOP

• ISOLATION VOLTAGE:

   BV: 1500 Vr.m.s. MIN

• LOW OFFSET VOLTAGE

• LOW LED OPERATING CURRENT:

   IF = 2 mA

• AVAILABLE IN TAPE AND REEL

APPLICATIONS

• EXCHANGE EQUIPMENT

• MEASUREMENT EQUIPMENT

• FA/OA EQUIPMENT

DESCRIPTION
The UTC M2950/2951 is a monolithic Integrated voltage regulator with low dropout voltage, and low quiescent current. It includes many features that suitable for different applications. Available in 3-PIN TO-92, DIP-8 and SOP-8 packages.

FEATURES
* High accuracy 2.5, 3.0, 3.3, 3.6 or 5V fixed output for TO-92, SOP-8 package.
* Extremely low quiescent current and dropout voltage.
* Extremely tight load and line regulation.
* Current and thermal limiting.
* Very low temperature coefficient.
* Logic controlled shutdown and error flag available for DIP and SOP package.
* Output voltage programmable for DIP and SOP package.

APPLICATIONS
* Battery powered equipment.
* High efficient linear regulator down to 1.24V.
* Cellular phones.

DESCRIPTION
These line drivers are PIN compatible with 26LS31 in applications where PIN 4 = 5V and PIN 12 = GND. Internal clamp diodes allow trouble-free operation when driving cable lengths exceeding 100m. Split supplies are provided to minimize standby power dissipation in high voltage applications. The logic should be powered from a regulated 5V supply at the VccBias PIN. The output stages may then be powered by a separate supply at VccDrivers, up to 30V.

FEATURES
• Supply Voltage Range 3.5V to 30V
• Operation to 800KHz
• CMOS and TTL Compatible Inputs
• Separate logic bias and driver supply PINs
• Optional single supply operation for moderate power applications
• High Impedance Buffered Inputs with Hysteresis may be driven directly by phototransistors
• Tri-State outputs
• 80mA peak SINK/SOURCE current
• Outputs Protected by Thermal Shut-Down

APPLICATIONS
• Optical Encoders
• Industrial Controls

The BA15532, BA15532F, and BA15532N are low-noise dual operational amplifiers designed especially for applications involving high-grade audio equipment. Since they feature low noise, a wide band width, and high power output, these products can also be used in measuring instruments and control Circuits. The following packages are available : 8-PIN DIP (BA15532), 8-PIN SOP (BA15532F), and 8-PIN SIP (BA15532N).

• Features
1) High output current capacity.
2) High slew rate.
3) Low noise.

Description
CPC1008N is a miniature, low-voltage, low on-resistance, single-pole, normally open (1-Form-A) solid state relay in a 4-PIN SOP package. It uses IXYS Integrated Circuits Division’s patented, optically coupled, OptoMOS architecture to provide 1500Vrms of input/output isolation.
Using IXYS Integrated Circuits Division’s state of the art double-molded vertical construction packaging, the CPC1008N is one of the world’s smallest relays. It is ideal for replacing larger, less-reliable reed and electromechanical relays.

Features
• 1500Vrms Input/Output Isolation
• Small 4-PIN SOP Package
• Low Drive Power Requirements
• High Reliability
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Halogen-Free
• Tape & Reel Version Available
• Flammability Rating UL 94 V-0

Applications
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Security Systems
• Aerospace
• Industrial Controls
• Reed Relay Replacement

General Description
The G1442 is a mono audio power amplifier in 8 PIN SOP-8, MSOP-8, SOP-8 (FD) or TDFN3X3-8 with thermal pad package. It can drive 2W continuous RMS power into 4Ω load in Bridge-Tied Load (BTL) mode at 5V supply voltage. Its THD is smaller than 1% under the above operation condition. For the low current consumption applications, the SHDN mode is supported to disable the G1442 when it is idle. The current consumption can be further reduced to below 1µA.

Features
● Depop Circuitry Integrated
● 2.7V to 5.5V Operation
● Output Power at 10% THD+N, VDD=5V
   --2.6W (typical) into a 3Ω Load
● Output Power at 1% THD+N, VDD=5V
   --2W (typical) into a 4Ω Load
   --1.3W (typical) into a 8Ω Load
● Mono Bridge-Tied Load (BTL)
● Shutdown Control Available
● SOP-8, MSOP-8, SOP-8 (FD) and TDFN3X3-8 Package Available

Applications
● PDAs
● Portable Devices
● Notebook