P/N + Description + Content Search

MSC1692 PDF : MSC1692 / SOP 20 Pin.

General Description
HT6240-002 is designed as infrared remote encoders, usually applied to TV systems. The 4x8 key matrix input and the extension bit input can transmit a max. of 256 instructions. HT6240-002 have three different packages: 20-Pin DIP, 20-Pin SOP and 24-Pin SOP.

Features
• Operating voltage: 2.2V~3.6V
• Low power consumption
• Few external parts
• 20-Pin DIP/SOP package 24-Pin SOP package

Applications
• Television and video cassette recorder controllers
• Garage door controllers
• Car door controllers
• Security systems
• Other remote control systems

The OZ960 operates at a single, constant frequency in a phase-shift PWM mode. Intelligent open-lamp and over-voltage protections provide design flexibility so various transformer models/manufacturers may be used.



The built-in burst mode control provides a wide dimming range and simplifies the application circuit designs. Both operating and burst-mode frequencies are user-programmable parameters.

DESCRIPTION
These line drivers are Pin compatible with 26LS31 in applications where Pin 4 = 5V and Pin 12 = GND. Internal clamp diodes allow trouble-free operation when driving cable lengths exceeding 100m. Split supplies are provided to minimize standby power dissipation in high voltage applications. The logic should be powered from a regulated 5V supply at the VccBias Pin. The output stages may then be powered by a separate supply at VccDrivers, up to 30V.

FEATURES
• Supply Voltage Range 3.5V to 30V
• Operation to 800KHz
• CMOS and TTL Compatible Inputs
• Separate logic bias and driver supply Pins
• Optional single supply operation for moderate power applications
• High Impedance Buffered Inputs with Hysteresis may be driven directly by phototransistors
• Tri-State outputs
• 80mA peak SINK/SOURCE current
• Outputs Protected by Thermal Shut-Down

APPLICATIONS
• Optical Encoders
• Industrial Controls

General Description
HT6240-002 is designed as infrared remote encoders, usually applied to TV systems. The 4x8 key matrix input and the extension bit input can transmit a max. of 256 instructions. HT6240-002 have two different packages: 20-Pin SOP and 24-Pin SOP.

Features
• Operating voltage: 2.2V~3.6V
• Low power consumption
• Few external parts
• 20/24-Pin SOP package

Applications
• Television and video cassette recorder controllers
• Garage door controllers
• Car door controllers
• Security systems
• Other remote control systems

Description
M/A-COM’s SW-226/227/228-Pin are GaAs MMIC SPDT switches packaged in lead-free, surface mount CR-2 ceramic style packages. The SW-226- Pin is a terminated SPDT. The SW-227-Pin offers high isolation. The SW-228-Pin offers low insertion loss. This ceramic switch platform has a common footprint for all three designs. The CR-2 package is hermetically sealed, making these switches ideal for space, military radios, and other environmentally harsh applications.

Features
• Terminated (SW-226-PIN), High Isolation (SW-227-PIN), Low Loss (SW-228-PIN)
• Fast Switching Speed: 6 nS Typical
• Ultra Low DC Power Consumption
• Lead-Free 7-Lead Ceramic Package
• RoHS* Compliant and 260°C Reflow Compatible

Features
• Low Insertion Loss, 0.5 dB Typical
• Integral TTL Driver
• Low DC Power Consumption
• 50 Ohm Nominal Impedance
• MIL-STD-883 screening available

Features
• Low Insertion Loss, 1.0 dB Typical
• Fast Switching Speed, 20 nS Typical
• Ultra Low DC Power Consumption, 0.12 mA Typical
• Integral TTL (SW-233) or CMOS (SW-236) Driver
• 50 Ohm Nominal Impedance
• MIL-STD-883 screening available

Features
•  Low Insertion Loss, 1.0 dB Typical
•  Fast Switching Speed, 20 nS Typical
•  Ultra Low DC Power Consumption, 0.07 mA Typical
•  Integral TTL (SW-215) or CMOS (SW-216) Driver
•  50 Ohm Nominal Impedance
•  MIL-STD-883 screening available

Description
The BL93C46 provides 1024 bits of serial electrically erasable programmable read only memory (EEPROM) organized as 64 words of 16 bits each, when the ORG Pin is connected to VCC and 128 words of 8 bits each when it is tied to ground. TheBL93C46 is available in space-saving 8-lead PDIP, 8-lead TSSOP and 8-lead JEDEC SOIC packages.

Features
➤ Three-wire Serial Interface
➤ VCC = 1.8V to 5.5V
➤ 2 MHz Rate (5V) Compatibility
➤ Self-timed Write Cycle (5 ms max)
➤ 1 Million Write Cycles guaranteed
➤ Data Retention > 100 Years
➤ 8-lead PDIP, 8-lead JEDEC SOIC and 8-lead TSSOP Packages