P/N + Description + Content Search

1. Single N/N type Inverter

2. High Frequency Voltage Mode PWM Control

3. Easy Burst Dimming Control

4. External UVLO Function

5. Latched Mode Protection

6. Adjustable Shut-down time

7. Variable Protection function

DESCRIPTION
These line drivers are pin compatible with 26LS31 in applications where pin 4 = 5V and pin 12 = GND. Internal clamp diodes allow trouble-free operation when driving cable lengths exceeding 100m. Split supplies are provided to minimize standby power dissipation in high voltage applications. The logic should be powered from a regulated 5V supply at the VccBias pin. The output stages may then be powered by a separate supply at VccDrivers, up to 30V.

FEATURES
• Supply Voltage Range 3.5V to 30V
• Operation to 800KHz
• CMOS and TTL Compatible Inputs
• Separate logic bias and driver supply pins
• Optional single supply operation for moderate power applications
• High Impedance Buffered Inputs with Hysteresis may be driven directly by phototransistors
• Tri-State outputs
• 80mA peak SINK/SOURCE current
• Outputs Protected by Thermal Shut-Down

APPLICATIONS
• Optical Encoders
• Industrial Controls

SEM2106 / SOP 24Pin

Reference Site :

//www.badcaps.net/forum/showthread.php?t=32636

Reference PDF

https://www.dropbox.com/s/xq0qvfa0sm4fxpa/SEM2106.pdf?dl=0

Description
The BL93C46 provides 1024 bits of serial electrically erasable programmable read only memory (EEPROM) organized as 64 words of 16 bits each, when the ORG pin is connected to VCC and 128 words of 8 bits each when it is tied to ground. TheBL93C46 is available in space-saving 8-lead PDIP, 8-lead TSSOP and 8-lead JEDEC SOIC packages.

Features
➤ Three-wire Serial Interface
➤ VCC = 1.8V to 5.5V
➤ 2 MHz Rate (5V) Compatibility
➤ Self-timed Write Cycle (5 ms max)
➤ 1 Million Write Cycles guaranteed
➤ Data Retention > 100 Years
➤ 8-lead PDIP, 8-lead JEDEC SOIC and 8-lead TSSOP Packages

GENERAL DESCRIPTION

The SM5025A/B is an infrared remote control encoder LSI utilizing CMOS technology. The transmission code consists of "leader pulse", "16 bit customer code", and "16 bit data code". Using Micro-processors for decoder, various applications can be realized.

FEATURE

* Low voltage operation ......VDD = 2.0 to 3.3V

* Low power consumtpion ..... IDD < 1
A at standby mode

* 64 function keys and 3 double action keys

* 128 + 6 function codes are available. (Using SEL terminal)

* 65536 customer codes can be selected. (Using external R, Diode-SM5025A or internal MASK ROM-SM5025IRB)

* 24Pin SOP or DIP

APPLICATIONS

1. Audio Remote Control

2. Video Remote Control

3. Consumer Product Remote Control

[ASTEC STANDARD POWER]

DC/DC Converters / DA series 2.25 Watts / Single Dual Outputs

Special Features
​​​​​​​* 2.25 Watts
* 24Pin DIP
* Regulated & unregulated outputs
* Auto-insertable

8Watt | DC-DC Converter

FEATURES:
● 2:1Wide Input Voltage.
● 8 Watt 24Pin DIL Package.
● Efficiency To 82%
● PI Input Filter.
● 1600Vdc Isolation
● MTBF:>1,500,000 hrs
● Operating Temperature:-40℃ TO +100℃

APPLICATIONS:
● Wireless Network
● Telecom/Datacom
● Industry Control System
● Measurement Equipment
● Semiconductor Equipment

SOP Package

DESCRIPTION
The M62456FP Integrated Circuit is developed for audio-visual equipment. It being used for controld sound in the power amplifier front stage. It has BASSBOOST circuit corresponding to BTL type driver.

FEATURES
   24Pin SSOP
   Build in diode clip circuit
   Corresponding to BTL type driver.
   Boost level control (3 steps)

GENERAL DESCRIPTION
The AK4522 has a dynamic range of 100dB and is well-suited middle-range MD, surround system, musical instruments and car audio. Signal inputs and outputs are single-ended. The DAC outputs are analog filtered to remove out of band noise. External components are minimized. The AK4522 is available in a small 24Pin VSOP package, which will reduce system space.

FEATURES
• ∆Σ Stereo ADC
    - 64x Oversampling
    - Sampling Rate Ranging from 16kHz to 48kHz
    - S/(N+D): 92dB
    - Dynamic Range, S/N: 100dB
    - Digital HPF for offset cancellation
• ∆Σ Stereo DAC
    - 128x Oversampling
    - Sampling Rate Ranging from 16kHz to 48kHz
    - 2nd order SCF + 2nd order CTF
    - Digital de-emphasis for 32kHz, 44.1kHz, 48kHz sampling
    - S/(N+D): 90dB
    - Dynamic Range, S/N: 100dB
    - Soft Mute
• High Jitter Tolerance
• Master Clock: 256fs, 384fs, 512fs
• Analog Power Supply: 4.5 to 5.5V, Digital Power Supply: 2.7 to 5.5V
• Small VSOP Package: 24Pin VSOP