ST62P00LN6 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

ST62P00LN6

8-BIT MCUs WITH A/D CONVERTER, TWO TIMERS, OSCILLATOR SAFEGUARD & SAFE RESET

STMicroelectronics 

ST6200C/ST6201C/ST6203C

11 ELECTRICAL CHARACTERISTICS

11.1 PARAMETER CONDITIONS

Unless otherwise specified, all voltages are re-

ferred to VSS.

11.1.1 Minimum and Maximum Values

Unless otherwise specified the minimum and max-

imum values are guaranteed in the worst condi-

tions of ambient temperature, supply voltage and

frequencies by tests in production on 100% of the

devices with an ambient temperature at TA=25°C

and TA=TAmax (given by the selected temperature

range).

Data based on characterization results, design

simulation and/or technology characteristics are

indicated in the table footnotes and are not tested

in production. Based on characterization, the min-

imum and maximum values refer to sample tests

and represent the mean value plus or minus three

times the standard deviation (mean±3Σ).

11.1.2 Typical Values

Unless otherwise specified, typical data are based

on TA=25°C, VDD=5V (for the 4.5V≤VDD≤6.0V

voltage range) and VDD=3.3V (for the

3V≤VDD≤3.6V voltage range). They are given only

as design guidelines and are not tested.

11.1.3 Typical Curves

Unless otherwise specified, all typical curves are

given only as design guidelines and are not tested.

11.1.4 Loading Capacitor

The loading conditions used for pin parameter

measurement is shown in Figure 30.

Figure 30. Pin Loading Conditions

ST6 PIN

CL

11.1.5 Pin Input Voltage

The input voltage measurement on a pin of the de-

vice is described in Figure 31.

Figure 31. Pin Input Voltage

ST6 PIN

VIN

58/100

1

Share Link: