R5F10366ASP-X0 查看數據表（PDF） - Renesas Electronics
零件编号
产品描述 (功能)
生产厂家
R5F10366ASP-X0 Datasheet PDF : 110 Pages
| |||
RL78/G12
3. ELECTRICAL SPECIFICATIONS (G: TA = −40 to +105°C)
(2) During communication at same potential (CSI mode) (master mode, SCKp... internal clock output)
(TA = −40 to +105°C, 2.4 V ≤ VDD ≤ 5.5 V, VSS = 0 V)
Parameter
Symbol
Conditions
HS (high-speed main) Mode
Unit
MIN.
MAX.
SCKp cycle time
tKCY1
tKCY1 ≥ 4/fCLK
2.7 V ≤ VDD ≤ 5.5 V
334
ns
2.4 V ≤ VDD ≤ 5.5 V
500
ns
SCKp high-/low-level width
tKH1,
tKL1
4.0 V ≤ VDD ≤ 5.5 V
2.7 V ≤ VDD ≤ 5.5 V
tKCY1/2−24
ns
tKCY1/2−36
ns
2.4 V ≤ VDD ≤ 5.5 V
tKCY1/2−76
ns
SIp setup time (to SCKp↑) Note 1
tSIK1
4.0 V ≤ VDD ≤ 5.5 V
66
ns
2.7 V ≤ VDD ≤ 5.5 V
66
ns
2.4 V ≤ VDD ≤ 5.5 V
113
ns
SIp hold time (from SCKp↑) Note 2
tKSI1
38
ns
Delay time from SCKp↓ to
SOp output Note 3
tKSO1
C = 30 pF Note4
50
ns
Notes 1.
2.
3.
4.
When DAPmn = 0 and CKPmn = 0, or DAPmn = 1 and CKPmn = 1. The SIp setup time becomes “to
SCKp↓” when DAPmn = 0 and CKPmn = 1, or DAPmn = 1 and CKPmn = 0.
When DAPmn = 0 and CKPmn = 0, or DAPmn = 1 and CKPmn = 1. The SIp hold time becomes “from
SCKp↓” when DAPmn = 0 and CKPmn = 1, or DAPmn = 1 and CKPmn = 0.
When DAPmn = 0 and CKPmn = 0, or DAPmn = 1 and CKPmn = 1. The delay time to SOp output
becomes “from SCKp↑” when DAPmn = 0 and CKPmn = 1, or DAPmn = 1 and CKPmn = 0.
C is the load capacitance of the SCKp and SOp output lines.
Caution Select the normal input buffer for the SIp pin and the normal output mode for the SOp and SCKp pins
by using port input mode register 1 (PIM1) and port output mode registers 0, 1, 4 (POM0, POM1,
POM4).
Remarks 1. p: CSI number (p = 00, 01, 11, 20), m: Unit number (m = 0, 1), n: Channel number (n = 0, 1, 3)
2. fMCK: Serial array unit operation clock frequency
(Operation clock to be set by the serial clock select register m (SPSm) and the CKSmn bit of serial mode
register mn (SMRmn). m: Unit number (m = 0, 1), n: Channel number (n = 0, 1, 3))
R01DS0193EJ0200 Rev.2.00
Sep 06, 2013
Page 78 of 106
Share Link: 