CS9236-CQ 查看數據表（PDF） - Cirrus Logic

零件编号

产品描述 (功能)

生产厂家

CS9236-CQ

Single-Chip Wavetable Music Synthesizer

Cirrus Logic 

CS9236

Control Change Messages (Continued)

SOSTENUTO (CONTROLLER 66)

BnH

40H

n = MIDI channel number

vv = control value

vvH

0 - FH (1 - 16)

00 - 3FH (0 - 63) <OFF>

40 - 7FH (64 - 127) <ON>

The effect of SOSTENUTO is similar to DAMPER PEDAL (SUSTAIN), except that SOSTENUTO only affects notes which

were already active at the time that SOSTENUTO was switched ON. Notes which were already playing when the SOSTE-

NUTO ON message is received will be sustained until the corresponding NOTE OFF message is received or until SOSTE-

NUTO is turned OFF, whichever occurs later. NOTE ON messages which are received after SOSTENUTO has been

switched ON are not affected. The CS9236 default value for SOSTENUTO is zero (Off).

EFFECT 1 DEPTH/REVERB SEND LEVEL (CONTROLLER 91)

BnH

5BH

n = MIDI channel number

vv = reverb send depth

vvH

0 - FH (1 - 16)

00 - 7FH (0 - 127)

The REVERB SEND LEVEL message (MIDI Controller 91) is used to adjust the amount of reverb effect applied to sounds

played on the specified MIDI channel. Each melodic instrument (MIDI channels 1 - 9, 11 - 16) and each individual percus-

sion sound (MIDI channel 10) implemented in the CS9236 has a predefined default reverb send level. The reverb send level

used when a sound is produced is either the value received from a REVERB SEND LEVEL message (MIDI Controller 91)

or the default for the melodic instrument (or percussion sound) currently selected on the specified MIDI channel, whichever

is greater. The CS9236 reverb send level response curve is exponential.

EFFECT 3 DEPTH/CHORUS SEND LEVEL (CONTROLLER 93)

BnH

5DH

n = MIDI channel number

vv = chorus send depth

vvH

0 - FH (1 - 16)

00 - 7FH (0 - 127)

The CHORUS SEND LEVEL message (MIDI Controller 93) is used to adjust the amount of chorus effect applied to sounds

played on the specified MIDI channel. Each melodic instrument (MIDI channels 1 - 9, 11 - 16) and each individual percus-

sion sound (MIDI channel 10) implemented in the CS9236 has a predefined default chorus send level. The chorus send level

used when a sound is produced is either the value received from a CHORUS SEND LEVEL message (MIDI Controller 93)

or the default for the melodic instrument (or percussion sound) currently selected on the specified MIDI channel, whichever

is greater. The CS9236 chorus send level response curve is exponential.

DS214PP11

21

Share Link: