CS4205 查看數據表（PDF） - Cirrus Logic

零件编号

产品描述 (功能)

生产厂家

CS4205

CrystalClear® Audio Codec ’97 for Portable Computing

Cirrus Logic 

CS4205

8. SONY/PHILIPS DIGITAL

INTERFACE (S/PDIF)

The S/PDIF digital output is used to interface the

CS4205 to consumer audio equipment external to

the PC. This output provides an interface for stor-

ing digital audio data or playing digital audio data

to digital speakers. Figure 22 illustrates the circuits

necessary for implementing the IEC-958 optical or

consumer interface. For further information on

S/PDIF operation see application note AN22: Over-

view of Digital Audio Interface Data Structures [3].

For further information on S/PDIF recommended

transformers see application note AN134: AES and

S/PDIF Recommended Transformers [4].

9. EXCLUSIVE FUNCTIONS

Some of the digital pins on the CS4205 have mul-

tiplexed functionality. These functions are mutual-

ly exclusive and cannot be requested at the same

time. The following pairs of functions are mutually

exclusive:

• GPIO and Serial Data Port (GPIO0 pin is

shared with LRCLK pin, GPIO1 pin is shared

with SDOUT pin, and GPIO[4:2] pins are

shared with SDI[3:1] pins)

• EAPD and Serial Data Port Serial Clock

(EAPD pin is shared with SCLK pin)

• S/PDIF and Second Serial Data Port (SPDO pin

is shared with SDO2 pin)

Use of the GPIO0/LRCLK, GPIO1/SDOUT, and

GPIO[4:2]/SDI[3:1] pins for serial data port has

priority over their GPIO functionality. There is no

priority assigned to the other two exclusive func-

tions. A function currently in use must be disabled

or powered down before the corresponding exclu-

sive function can be enabled. The following control

bits for these functions will behave differently than

normal bits: the EAPD bit in the Powerdown Con-

trol/Status Register (Index 26h), the GC[4:0] bits in

the GPIO Pin Configuration Register (Index 4Ch),

the SPEN bit in the S/PDIF Control Register (Index

68h), and the SDI[3:1], SDO2, and SDSC bits in

the Serial Port Control Register (Index 6Ah). These

bits can become read-only bits if they control a fea-

ture that is currently unavailable because the corre-

sponding exclusive feature is already in use, or the

corresponding master control for this feature is not

set.

S/PDIF_OUT R1

SPDO/SDO2

R2

DVdd 3.3V 5V

R1 247.5 Ω 375 Ω

R2 107.6 Ω 93.75 Ω

DGND

J1

T1

+5V_PCI

0.1 µ F

SPDO/SDO2 4

3

8.2 kΩ 2

1

5

DGND

6

DGND

TOTX-173 DGND

Figure 22. S/PDIF Output

58

DS489PP4

Share Link: