datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Number :
Home  >>>  TVP5150AM1 Datasheet

TVP5150AM1

  

Datasheet PDF

Match, Like TVP5150AM1
Start with TVP5150AM1-* TVP5150AM1I* TVP5150AM1M* TVP5150AM1P* TVP5150AM1Z*
End N/A
Included N/A
View Details    
Manufacturer Part no Description View
TI
Texas Instruments
TVP5150AM1 Ultralow Power NTSC/PAL/SECAM Video Decoder With Robust Sync Detector

Introduction
The TVP5150A device is an ultralow power NTSC/PAL/SECAM video decoder. Available in a space saving 32-pin TQFP package, the TVP5150A decoder converts NTSC, PAL, and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also available. The optimized architecture of the TVP5150A decoder allows for ultralow-power consumption. The decoder consumes 115 mW of power in typical operation and consumes less than 1 mW in power-down mode, considerably increasing battery life in portable applications. The decoder uses just one crystal for all supported standards. The TVP5150A decoder can be programmed using an I2C serial interface. The decoder uses a 1.8-V supply for its analog and digital supplies, and a 3.3-V supply for its I/O.
The TVP5150A decoder converts baseband analog video into digital YCbCr 4:2:2 component video. Composite and S-video inputs are supported. The TVP5150A decoder includes one 9-bit analog-to-digital converter (ADC) with 2x sampling. Sampling is ITU-R BT.601 (27.0 MHz, generated from the 14.31818-MHz crystal or oscillator input) and is line-locked. The output formats can be 8-bit 4:2:2 or 8-bit ITU-R BT.656 with embedded synchronization.
The TVP5150A decoder utilizes Texas Instruments patented technology for locking to weak, noisy, or unstable signals. A Genlock/real-time control (RTC) output is generated for synchronizing downstream video encoders.
Complementary 4-line adaptive comb filtering is available for both the luma and chroma data paths to reduce both cross-luma and cross-chroma artifacts; a chroma trap filter is also available.

Features
• Accepts NTSC (M, 4.43), PAL (B, D, G, H, I, M, N), and SECAM (B, D, G, K, K1, L) video data
• Supports ITU-R BT.601 standard sampling
• High-speed 9-bit ADC
• Two composite inputs or one S-video input
• Fully differential CMOS analog preprocessing channels with clamping and automatic
   gain control (AGC) for best signal-to-noise (S/N) performance
• Ultralow power consumption: 115 mW typical
• 32-pin TQFP package
• Power-down mode: <1 mW
• Brightness, contrast, saturation, hue, and sharpness control through I2C
• Complementary 4-line (3-H delay) adaptive comb filters for both cross-luminance and cross-
   chrominance noise reduction
• Patented architecture for locking to weak, noisy, or unstable signals
• Single 14.31818-MHz crystal for all standards
• Internal phase-locked loop (PLL) for line-locked clock and sampling
• Subcarrier Genlock output for synchronizing color subcarrier of external encoder
• Standard programmable video output format:
   − ITU-R BT.656, 8-bit 4:2:2 with embedded syncs
   − 8-bit 4:2:2 with discrete syncs
• Macrovision™ copy protection detection
• Advanced programmable video output formats:
   − 2x oversampled raw VBI data during active video
   − Sliced VBI data during horizontal blanking or active video
• VBI modes supported
   − Teletext (NABTS, WST)
   − Closed-caption decode with FIFO, and extended data services (EDS)
   − Wide screen signaling, video program system, CGMS, vertical interval time code
   − Gemstar 1x/2x electronic program guide compatible mode
   − Custom configuration mode that allows the user to program the slice engine for unique
      VBI data signals
• Power-on reset


other parts : TVP5150A  TVP5150AM1PBS  TVP5150AM1PBSR  TVP5150AM1ZQC  TVP5150AM1ZQCR  TVP5150APBS  TVP5150APBSR  TVP5150AZQC  TVP5150AZQCR  
TVP5150AM1 PDF
TI
Texas Instruments
TVP5150AM1 Ultralow-Power NTSC/PAL/SECAM Video Decoder

Description
The TVP5150AM1 device is an ultralow-power NTSC/PAL/SECAM video decoder. Available in a space-saving 48-terminal PBGA package or a 32-terminal TQFP package, the TVP5150AM1 decoder converts NTSC, PAL, and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also available. The optimized architecture of the TVP5150AM1 decoder allows for ultralow power consumption.

Features
• Accepts NTSC (J, M, 4.43), PAL (B, D, G, H, I, M, N, Nc), and SECAM (B, D, G, K, K1, L) Video
• Supports ITU-R BT.601 Standard Sampling
• High-Speed 9-Bit Analog-to-Digital Converter (ADC)
• Two Composite Inputs or One S-Video Input
• Fully Differential CMOS Analog Preprocessing
   Channels With Clamping and Automatic Gain
   Control (AGC) for Best Signal-to-Noise (S/N) Performance
• Ultralow Power Consumption
• 48-Terminal PBGA Package (ZQC) or 32-Terminal TQFP Package (PBS)
• Power-Down Mode: <1 mW
• Brightness, Contrast, Saturation, Hue, and Sharpness Control Through I2C
• Complementary 4-Line (3-H Delay) Adaptive Comb Filters for Both Cross-Luminance and Cross-
   Chrominance Noise Reduction
• Patented Architecture for Locking to Weak, Noisy, or Unstable Signals
• Single 14.31818-MHz Crystal for All Standards
• Internal Phase-Locked Loop (PLL) for Line-Locked Clock and Sampling
• Subcarrier Genlock Output for Synchronizing Color Subcarrier of External Encoder
• 3.3-V Digital I/O Supply Voltage Range
• Standard Programmable Video Output Formats
   – ITU-R BT.656, 8-Bit 4:2:2 With Embedded Syncs
   – 8-Bit 4:2:2 With Discrete Syncs
• Macrovision™ Copy Protection Detection
• Advanced Programmable Video Output Formats
   – 2× Oversampled Raw Vertical Blanking Interval (VBI) Data During Active Video
   – Sliced VBI Data During Horizontal Blanking or Active Video
• VBI Modes Supported
   – Teletext (NABTS, WST)
   – Closed-Caption Decode With FIFO and Extended Data Services (XDS)
   – Wide Screen Signaling, Video Program System, CGMS-A, Vertical Interval Time Code
   – Gemstar 1x/2x Electronic Program Guide Compatible Mode
   – Custom Configuration Mode That Allows User to Program Slice Engine for Unique VBI Data
   Signals
• Power-On Reset
• Industrial Temperature Range
   (TVP5150AM1I): –40°C to 85°C
• Qualified for Automotive Applications
   (AEC-Q100 Rev G – TVP5150AM1IPBSQ1, TVP5150AM1IPBSRQ)


other parts : 5150AM1  TVP5150AM1IPBS  TVP5150AM1IPBSQ1  TVP5150AM1IPBSR  TVP5150AM1IPBSRQ  TVP5150AM1IPBSRQ1  TVP5150AM1IZQC  TVP5150AM1IZQCR  
TVP5150AM1 PDF
TI
Texas Instruments
TVP5150AM1ZQC Ultralow Power NTSC/PAL/SECAM Video Decoder With Robust Sync Detector

Introduction
The TVP5150A device is an ultralow power NTSC/PAL/SECAM video decoder. Available in a space saving 32-pin TQFP package, the TVP5150A decoder converts NTSC, PAL, and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also available. The optimized architecture of the TVP5150A decoder allows for ultralow-power consumption. The decoder consumes 115 mW of power in typical operation and consumes less than 1 mW in power-down mode, considerably increasing battery life in portable applications. The decoder uses just one crystal for all supported standards. The TVP5150A decoder can be programmed using an I2C serial interface. The decoder uses a 1.8-V supply for its analog and digital supplies, and a 3.3-V supply for its I/O.
The TVP5150A decoder converts baseband analog video into digital YCbCr 4:2:2 component video. Composite and S-video inputs are supported. The TVP5150A decoder includes one 9-bit analog-to-digital converter (ADC) with 2x sampling. Sampling is ITU-R BT.601 (27.0 MHz, generated from the 14.31818-MHz crystal or oscillator input) and is line-locked. The output formats can be 8-bit 4:2:2 or 8-bit ITU-R BT.656 with embedded synchronization.
The TVP5150A decoder utilizes Texas Instruments patented technology for locking to weak, noisy, or unstable signals. A Genlock/real-time control (RTC) output is generated for synchronizing downstream video encoders.
Complementary 4-line adaptive comb filtering is available for both the luma and chroma data paths to reduce both cross-luma and cross-chroma artifacts; a chroma trap filter is also available.

Features
• Accepts NTSC (M, 4.43), PAL (B, D, G, H, I, M, N), and SECAM (B, D, G, K, K1, L) video data
• Supports ITU-R BT.601 standard sampling
• High-speed 9-bit ADC
• Two composite inputs or one S-video input
• Fully differential CMOS analog preprocessing channels with clamping and automatic
   gain control (AGC) for best signal-to-noise (S/N) performance
• Ultralow power consumption: 115 mW typical
• 32-pin TQFP package
• Power-down mode: <1 mW
• Brightness, contrast, saturation, hue, and sharpness control through I2C
• Complementary 4-line (3-H delay) adaptive comb filters for both cross-luminance and cross-
   chrominance noise reduction
• Patented architecture for locking to weak, noisy, or unstable signals
• Single 14.31818-MHz crystal for all standards
• Internal phase-locked loop (PLL) for line-locked clock and sampling
• Subcarrier Genlock output for synchronizing color subcarrier of external encoder
• Standard programmable video output format:
   − ITU-R BT.656, 8-bit 4:2:2 with embedded syncs
   − 8-bit 4:2:2 with discrete syncs
• Macrovision™ copy protection detection
• Advanced programmable video output formats:
   − 2x oversampled raw VBI data during active video
   − Sliced VBI data during horizontal blanking or active video
• VBI modes supported
   − Teletext (NABTS, WST)
   − Closed-caption decode with FIFO, and extended data services (EDS)
   − Wide screen signaling, video program system, CGMS, vertical interval time code
   − Gemstar 1x/2x electronic program guide compatible mode
   − Custom configuration mode that allows the user to program the slice engine for unique
      VBI data signals
• Power-on reset


other parts : TVP5150A  TVP5150AM1  TVP5150AM1PBS  TVP5150AM1PBSR  TVP5150AM1ZQCR  TVP5150APBS  TVP5150APBSR  TVP5150AZQC  TVP5150AZQCR  
TVP5150AM1ZQC PDF
TI
Texas Instruments
TVP5150AM1PBS Ultralow Power NTSC/PAL/SECAM Video Decoder With Robust Sync Detector

Introduction
The TVP5150A device is an ultralow power NTSC/PAL/SECAM video decoder. Available in a space saving 32-pin TQFP package, the TVP5150A decoder converts NTSC, PAL, and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also available. The optimized architecture of the TVP5150A decoder allows for ultralow-power consumption. The decoder consumes 115 mW of power in typical operation and consumes less than 1 mW in power-down mode, considerably increasing battery life in portable applications. The decoder uses just one crystal for all supported standards. The TVP5150A decoder can be programmed using an I2C serial interface. The decoder uses a 1.8-V supply for its analog and digital supplies, and a 3.3-V supply for its I/O.
The TVP5150A decoder converts baseband analog video into digital YCbCr 4:2:2 component video. Composite and S-video inputs are supported. The TVP5150A decoder includes one 9-bit analog-to-digital converter (ADC) with 2x sampling. Sampling is ITU-R BT.601 (27.0 MHz, generated from the 14.31818-MHz crystal or oscillator input) and is line-locked. The output formats can be 8-bit 4:2:2 or 8-bit ITU-R BT.656 with embedded synchronization.
The TVP5150A decoder utilizes Texas Instruments patented technology for locking to weak, noisy, or unstable signals. A Genlock/real-time control (RTC) output is generated for synchronizing downstream video encoders.
Complementary 4-line adaptive comb filtering is available for both the luma and chroma data paths to reduce both cross-luma and cross-chroma artifacts; a chroma trap filter is also available.

Features
• Accepts NTSC (M, 4.43), PAL (B, D, G, H, I, M, N), and SECAM (B, D, G, K, K1, L) video data
• Supports ITU-R BT.601 standard sampling
• High-speed 9-bit ADC
• Two composite inputs or one S-video input
• Fully differential CMOS analog preprocessing channels with clamping and automatic
   gain control (AGC) for best signal-to-noise (S/N) performance
• Ultralow power consumption: 115 mW typical
• 32-pin TQFP package
• Power-down mode: <1 mW
• Brightness, contrast, saturation, hue, and sharpness control through I2C
• Complementary 4-line (3-H delay) adaptive comb filters for both cross-luminance and cross-
   chrominance noise reduction
• Patented architecture for locking to weak, noisy, or unstable signals
• Single 14.31818-MHz crystal for all standards
• Internal phase-locked loop (PLL) for line-locked clock and sampling
• Subcarrier Genlock output for synchronizing color subcarrier of external encoder
• Standard programmable video output format:
   − ITU-R BT.656, 8-bit 4:2:2 with embedded syncs
   − 8-bit 4:2:2 with discrete syncs
• Macrovision™ copy protection detection
• Advanced programmable video output formats:
   − 2x oversampled raw VBI data during active video
   − Sliced VBI data during horizontal blanking or active video
• VBI modes supported
   − Teletext (NABTS, WST)
   − Closed-caption decode with FIFO, and extended data services (EDS)
   − Wide screen signaling, video program system, CGMS, vertical interval time code
   − Gemstar 1x/2x electronic program guide compatible mode
   − Custom configuration mode that allows the user to program the slice engine for unique
      VBI data signals
• Power-on reset


other parts : TVP5150A  TVP5150AM1  TVP5150AM1PBSR  TVP5150AM1ZQC  TVP5150AM1ZQCR  TVP5150APBS  TVP5150APBSR  TVP5150AZQC  TVP5150AZQCR  
TVP5150AM1PBS PDF
TI
Texas Instruments
TVP5150AM1-EP Ultralow-Power NTSC/PAL/SECAM Video Decoder

Description
The TVP5150AM1 device is an ultralow-power NTSC/PAL/SECAM video decoder. Available in a space-saving 32-terminal TQFP package, the TVP5150AM1 decoder converts NTSC, PAL, and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also available. The optimized architecture of the TVP5150AM1 decoder allows for ultralow power consumption. The decoder consumes 115 mW of power in typical operation and consumes less than 1 mW in power-down mode, considerably increasing battery life in portable applications.

TVP5150AM1 Features
Features
• Controlled Baseline
   – One Assembly Site
   – One Test Site
   – One Fabrication Site
• Extended Temperature Performance of –55°C to 125°C
• Enhanced Diminishing Manufacturing Sources (DMS) Support
• Enhanced Product-Change Notification
• Qualification Pedigree(1)
• Accepts NTSC (M, 4.43), PAL (B, D, G, H, I, M, N), and SECAM (B, D, G, K, K1, L) Video Data
• Supports ITU-R BT.601 Standard Sampling
• High-Speed 9-Bit Analog-to-Digital Converter (ADC)
• Two Composite Inputs or One S-Video Input
• Fully Differential CMOS Analog Preprocessing Channels With Clamping and Automatic Gain
   Control (AGC) for Best Signal-to-Noise (S/N) Performance
• Ultralow Power Consumption
• 32-Terminal TQFP Package
• Power-Down Mode: <1 mW
• Brightness, Contrast, Saturation, Hue, and Sharpness Control Through I2C
• Complementary 4-Line (3-H Delay) Adaptive
   Comb Filters for Both Cross-Luminance and Cross-Chrominance Noise Reduction
• Patented Architecture for Locking to Weak, Noisy, or Unstable Signals
• Single 14.31818-MHz Crystal for All Standards
• Internal Phase-Locked Loop (PLL) for Line-Locked Clock and Sampling
• Subcarrier Genlock Output for Synchronizing Color Subcarrier External Encoder
• Standard Programmable Video Output Formats
   – ITU-R BT.656, 8-Bit 4:2:2 With Embedded Syncs
   – 8-Bit 4:2:2 With Discrete Syncs
• Macrovision™ Copy Protection Detection
• Advanced Programmable Video Output
   Formats
   – 2× Oversampled Raw Vertical Blanking Interval (VBI) Data During Active Video
   – Sliced VBI Data During Horizontal Blanking
      or Active Video
• VBI Modes Supported
   – Teletext (NABTS, WST)
   – Closed-Caption Decode With FIFO and
      Extended Data Services (EDS)
   – Wide Screen Signaling, Video Program System, CGMS, Vertical Interval Time Code
   – Gemstar 1x/2x Electronic Program Guide Compatible Mode
   – Custom Configuration Mode That Allows User to Program Slice Engine for Unique VBI Data   
      Signals
• Power-On Reset
• Military Temperature Range (TVP5150AM1): –55°C to 125°C


other parts : 5150MEP  TVP5150AM1MPBSREP  V62/08626-01XE  
TVP5150AM1-EP PDF
TI
Texas Instruments
TVP5150AM1ZQCR Ultralow Power NTSC/PAL/SECAM Video Decoder With Robust Sync Detector

Introduction
The TVP5150A device is an ultralow power NTSC/PAL/SECAM video decoder. Available in a space saving 32-pin TQFP package, the TVP5150A decoder converts NTSC, PAL, and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also available. The optimized architecture of the TVP5150A decoder allows for ultralow-power consumption. The decoder consumes 115 mW of power in typical operation and consumes less than 1 mW in power-down mode, considerably increasing battery life in portable applications. The decoder uses just one crystal for all supported standards. The TVP5150A decoder can be programmed using an I2C serial interface. The decoder uses a 1.8-V supply for its analog and digital supplies, and a 3.3-V supply for its I/O.
The TVP5150A decoder converts baseband analog video into digital YCbCr 4:2:2 component video. Composite and S-video inputs are supported. The TVP5150A decoder includes one 9-bit analog-to-digital converter (ADC) with 2x sampling. Sampling is ITU-R BT.601 (27.0 MHz, generated from the 14.31818-MHz crystal or oscillator input) and is line-locked. The output formats can be 8-bit 4:2:2 or 8-bit ITU-R BT.656 with embedded synchronization.
The TVP5150A decoder utilizes Texas Instruments patented technology for locking to weak, noisy, or unstable signals. A Genlock/real-time control (RTC) output is generated for synchronizing downstream video encoders.
Complementary 4-line adaptive comb filtering is available for both the luma and chroma data paths to reduce both cross-luma and cross-chroma artifacts; a chroma trap filter is also available.

Features
• Accepts NTSC (M, 4.43), PAL (B, D, G, H, I, M, N), and SECAM (B, D, G, K, K1, L) video data
• Supports ITU-R BT.601 standard sampling
• High-speed 9-bit ADC
• Two composite inputs or one S-video input
• Fully differential CMOS analog preprocessing channels with clamping and automatic
   gain control (AGC) for best signal-to-noise (S/N) performance
• Ultralow power consumption: 115 mW typical
• 32-pin TQFP package
• Power-down mode: <1 mW
• Brightness, contrast, saturation, hue, and sharpness control through I2C
• Complementary 4-line (3-H delay) adaptive comb filters for both cross-luminance and cross-
   chrominance noise reduction
• Patented architecture for locking to weak, noisy, or unstable signals
• Single 14.31818-MHz crystal for all standards
• Internal phase-locked loop (PLL) for line-locked clock and sampling
• Subcarrier Genlock output for synchronizing color subcarrier of external encoder
• Standard programmable video output format:
   − ITU-R BT.656, 8-bit 4:2:2 with embedded syncs
   − 8-bit 4:2:2 with discrete syncs
• Macrovision™ copy protection detection
• Advanced programmable video output formats:
   − 2x oversampled raw VBI data during active video
   − Sliced VBI data during horizontal blanking or active video
• VBI modes supported
   − Teletext (NABTS, WST)
   − Closed-caption decode with FIFO, and extended data services (EDS)
   − Wide screen signaling, video program system, CGMS, vertical interval time code
   − Gemstar 1x/2x electronic program guide compatible mode
   − Custom configuration mode that allows the user to program the slice engine for unique
      VBI data signals
• Power-on reset


other parts : TVP5150A  TVP5150AM1  TVP5150AM1PBS  TVP5150AM1PBSR  TVP5150AM1ZQC  TVP5150APBS  TVP5150APBSR  TVP5150AZQC  TVP5150AZQCR  
TVP5150AM1ZQCR PDF
TI
Texas Instruments
TVP5150AM1PBSR Ultralow Power NTSC/PAL/SECAM Video Decoder With Robust Sync Detector

Introduction
The TVP5150A device is an ultralow power NTSC/PAL/SECAM video decoder. Available in a space saving 32-pin TQFP package, the TVP5150A decoder converts NTSC, PAL, and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also available. The optimized architecture of the TVP5150A decoder allows for ultralow-power consumption. The decoder consumes 115 mW of power in typical operation and consumes less than 1 mW in power-down mode, considerably increasing battery life in portable applications. The decoder uses just one crystal for all supported standards. The TVP5150A decoder can be programmed using an I2C serial interface. The decoder uses a 1.8-V supply for its analog and digital supplies, and a 3.3-V supply for its I/O.
The TVP5150A decoder converts baseband analog video into digital YCbCr 4:2:2 component video. Composite and S-video inputs are supported. The TVP5150A decoder includes one 9-bit analog-to-digital converter (ADC) with 2x sampling. Sampling is ITU-R BT.601 (27.0 MHz, generated from the 14.31818-MHz crystal or oscillator input) and is line-locked. The output formats can be 8-bit 4:2:2 or 8-bit ITU-R BT.656 with embedded synchronization.
The TVP5150A decoder utilizes Texas Instruments patented technology for locking to weak, noisy, or unstable signals. A Genlock/real-time control (RTC) output is generated for synchronizing downstream video encoders.
Complementary 4-line adaptive comb filtering is available for both the luma and chroma data paths to reduce both cross-luma and cross-chroma artifacts; a chroma trap filter is also available.

Features
• Accepts NTSC (M, 4.43), PAL (B, D, G, H, I, M, N), and SECAM (B, D, G, K, K1, L) video data
• Supports ITU-R BT.601 standard sampling
• High-speed 9-bit ADC
• Two composite inputs or one S-video input
• Fully differential CMOS analog preprocessing channels with clamping and automatic
   gain control (AGC) for best signal-to-noise (S/N) performance
• Ultralow power consumption: 115 mW typical
• 32-pin TQFP package
• Power-down mode: <1 mW
• Brightness, contrast, saturation, hue, and sharpness control through I2C
• Complementary 4-line (3-H delay) adaptive comb filters for both cross-luminance and cross-
   chrominance noise reduction
• Patented architecture for locking to weak, noisy, or unstable signals
• Single 14.31818-MHz crystal for all standards
• Internal phase-locked loop (PLL) for line-locked clock and sampling
• Subcarrier Genlock output for synchronizing color subcarrier of external encoder
• Standard programmable video output format:
   − ITU-R BT.656, 8-bit 4:2:2 with embedded syncs
   − 8-bit 4:2:2 with discrete syncs
• Macrovision™ copy protection detection
• Advanced programmable video output formats:
   − 2x oversampled raw VBI data during active video
   − Sliced VBI data during horizontal blanking or active video
• VBI modes supported
   − Teletext (NABTS, WST)
   − Closed-caption decode with FIFO, and extended data services (EDS)
   − Wide screen signaling, video program system, CGMS, vertical interval time code
   − Gemstar 1x/2x electronic program guide compatible mode
   − Custom configuration mode that allows the user to program the slice engine for unique
      VBI data signals
• Power-on reset


other parts : TVP5150A  TVP5150AM1  TVP5150AM1PBS  TVP5150AM1ZQC  TVP5150AM1ZQCR  TVP5150APBS  TVP5150APBSR  TVP5150AZQC  TVP5150AZQCR  
TVP5150AM1PBSR PDF
TI
Texas Instruments
TVP5150AM1IPBS Ultralow-Power NTSC/PAL/SECAM Video Decoder

Description
The TVP5150AM1 device is an ultralow-power NTSC/PAL/SECAM video decoder. Available in a space-saving 48-terminal PBGA package or a 32-terminal TQFP package, the TVP5150AM1 decoder converts NTSC, PAL, and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also available. The optimized architecture of the TVP5150AM1 decoder allows for ultralow power consumption.

Features
• Accepts NTSC (J, M, 4.43), PAL (B, D, G, H, I, M, N, Nc), and SECAM (B, D, G, K, K1, L) Video
• Supports ITU-R BT.601 Standard Sampling
• High-Speed 9-Bit Analog-to-Digital Converter (ADC)
• Two Composite Inputs or One S-Video Input
• Fully Differential CMOS Analog Preprocessing
   Channels With Clamping and Automatic Gain
   Control (AGC) for Best Signal-to-Noise (S/N) Performance
• Ultralow Power Consumption
• 48-Terminal PBGA Package (ZQC) or 32-Terminal TQFP Package (PBS)
• Power-Down Mode: <1 mW
• Brightness, Contrast, Saturation, Hue, and Sharpness Control Through I2C
• Complementary 4-Line (3-H Delay) Adaptive Comb Filters for Both Cross-Luminance and Cross-
   Chrominance Noise Reduction
• Patented Architecture for Locking to Weak, Noisy, or Unstable Signals
• Single 14.31818-MHz Crystal for All Standards
• Internal Phase-Locked Loop (PLL) for Line-Locked Clock and Sampling
• Subcarrier Genlock Output for Synchronizing Color Subcarrier of External Encoder
• 3.3-V Digital I/O Supply Voltage Range
• Standard Programmable Video Output Formats
   – ITU-R BT.656, 8-Bit 4:2:2 With Embedded Syncs
   – 8-Bit 4:2:2 With Discrete Syncs
• Macrovision™ Copy Protection Detection
• Advanced Programmable Video Output Formats
   – 2× Oversampled Raw Vertical Blanking Interval (VBI) Data During Active Video
   – Sliced VBI Data During Horizontal Blanking or Active Video
• VBI Modes Supported
   – Teletext (NABTS, WST)
   – Closed-Caption Decode With FIFO and Extended Data Services (XDS)
   – Wide Screen Signaling, Video Program System, CGMS-A, Vertical Interval Time Code
   – Gemstar 1x/2x Electronic Program Guide Compatible Mode
   – Custom Configuration Mode That Allows User to Program Slice Engine for Unique VBI Data
   Signals
• Power-On Reset
• Industrial Temperature Range
   (TVP5150AM1I): –40°C to 85°C
• Qualified for Automotive Applications
   (AEC-Q100 Rev G – TVP5150AM1IPBSQ1, TVP5150AM1IPBSRQ)


other parts : 5150AM1  TVP5150AM1IPBSQ1  TVP5150AM1IPBSR  TVP5150AM1IPBSRQ  TVP5150AM1IPBSRQ1  TVP5150AM1IZQC  TVP5150AM1IZQCR  TVP5150AM1  
TVP5150AM1IPBS PDF
TI
Texas Instruments
TVP5150AM1IZQC Ultralow-Power NTSC/PAL/SECAM Video Decoder

Description
The TVP5150AM1 device is an ultralow-power NTSC/PAL/SECAM video decoder. Available in a space-saving 48-terminal PBGA package or a 32-terminal TQFP package, the TVP5150AM1 decoder converts NTSC, PAL, and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also available. The optimized architecture of the TVP5150AM1 decoder allows for ultralow power consumption.

Features
• Accepts NTSC (J, M, 4.43), PAL (B, D, G, H, I, M, N, Nc), and SECAM (B, D, G, K, K1, L) Video
• Supports ITU-R BT.601 Standard Sampling
• High-Speed 9-Bit Analog-to-Digital Converter (ADC)
• Two Composite Inputs or One S-Video Input
• Fully Differential CMOS Analog Preprocessing
   Channels With Clamping and Automatic Gain
   Control (AGC) for Best Signal-to-Noise (S/N) Performance
• Ultralow Power Consumption
• 48-Terminal PBGA Package (ZQC) or 32-Terminal TQFP Package (PBS)
• Power-Down Mode: <1 mW
• Brightness, Contrast, Saturation, Hue, and Sharpness Control Through I2C
• Complementary 4-Line (3-H Delay) Adaptive Comb Filters for Both Cross-Luminance and Cross-
   Chrominance Noise Reduction
• Patented Architecture for Locking to Weak, Noisy, or Unstable Signals
• Single 14.31818-MHz Crystal for All Standards
• Internal Phase-Locked Loop (PLL) for Line-Locked Clock and Sampling
• Subcarrier Genlock Output for Synchronizing Color Subcarrier of External Encoder
• 3.3-V Digital I/O Supply Voltage Range
• Standard Programmable Video Output Formats
   – ITU-R BT.656, 8-Bit 4:2:2 With Embedded Syncs
   – 8-Bit 4:2:2 With Discrete Syncs
• Macrovision™ Copy Protection Detection
• Advanced Programmable Video Output Formats
   – 2× Oversampled Raw Vertical Blanking Interval (VBI) Data During Active Video
   – Sliced VBI Data During Horizontal Blanking or Active Video
• VBI Modes Supported
   – Teletext (NABTS, WST)
   – Closed-Caption Decode With FIFO and Extended Data Services (XDS)
   – Wide Screen Signaling, Video Program System, CGMS-A, Vertical Interval Time Code
   – Gemstar 1x/2x Electronic Program Guide Compatible Mode
   – Custom Configuration Mode That Allows User to Program Slice Engine for Unique VBI Data
   Signals
• Power-On Reset
• Industrial Temperature Range
   (TVP5150AM1I): –40°C to 85°C
• Qualified for Automotive Applications
   (AEC-Q100 Rev G – TVP5150AM1IPBSQ1, TVP5150AM1IPBSRQ)


other parts : 5150AM1  TVP5150AM1IPBS  TVP5150AM1IPBSQ1  TVP5150AM1IPBSR  TVP5150AM1IPBSRQ  TVP5150AM1IPBSRQ1  TVP5150AM1IZQCR  TVP5150AM1  
TVP5150AM1IZQC PDF
TI
Texas Instruments
TVP5150AM1IZQCR Ultralow-Power NTSC/PAL/SECAM Video Decoder

Description
The TVP5150AM1 device is an ultralow-power NTSC/PAL/SECAM video decoder. Available in a space-saving 48-terminal PBGA package or a 32-terminal TQFP package, the TVP5150AM1 decoder converts NTSC, PAL, and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also available. The optimized architecture of the TVP5150AM1 decoder allows for ultralow power consumption.

Features
• Accepts NTSC (J, M, 4.43), PAL (B, D, G, H, I, M, N, Nc), and SECAM (B, D, G, K, K1, L) Video
• Supports ITU-R BT.601 Standard Sampling
• High-Speed 9-Bit Analog-to-Digital Converter (ADC)
• Two Composite Inputs or One S-Video Input
• Fully Differential CMOS Analog Preprocessing
   Channels With Clamping and Automatic Gain
   Control (AGC) for Best Signal-to-Noise (S/N) Performance
• Ultralow Power Consumption
• 48-Terminal PBGA Package (ZQC) or 32-Terminal TQFP Package (PBS)
• Power-Down Mode: <1 mW
• Brightness, Contrast, Saturation, Hue, and Sharpness Control Through I2C
• Complementary 4-Line (3-H Delay) Adaptive Comb Filters for Both Cross-Luminance and Cross-
   Chrominance Noise Reduction
• Patented Architecture for Locking to Weak, Noisy, or Unstable Signals
• Single 14.31818-MHz Crystal for All Standards
• Internal Phase-Locked Loop (PLL) for Line-Locked Clock and Sampling
• Subcarrier Genlock Output for Synchronizing Color Subcarrier of External Encoder
• 3.3-V Digital I/O Supply Voltage Range
• Standard Programmable Video Output Formats
   – ITU-R BT.656, 8-Bit 4:2:2 With Embedded Syncs
   – 8-Bit 4:2:2 With Discrete Syncs
• Macrovision™ Copy Protection Detection
• Advanced Programmable Video Output Formats
   – 2× Oversampled Raw Vertical Blanking Interval (VBI) Data During Active Video
   – Sliced VBI Data During Horizontal Blanking or Active Video
• VBI Modes Supported
   – Teletext (NABTS, WST)
   – Closed-Caption Decode With FIFO and Extended Data Services (XDS)
   – Wide Screen Signaling, Video Program System, CGMS-A, Vertical Interval Time Code
   – Gemstar 1x/2x Electronic Program Guide Compatible Mode
   – Custom Configuration Mode That Allows User to Program Slice Engine for Unique VBI Data
   Signals
• Power-On Reset
• Industrial Temperature Range
   (TVP5150AM1I): –40°C to 85°C
• Qualified for Automotive Applications
   (AEC-Q100 Rev G – TVP5150AM1IPBSQ1, TVP5150AM1IPBSRQ)


other parts : 5150AM1  TVP5150AM1IPBS  TVP5150AM1IPBSQ1  TVP5150AM1IPBSR  TVP5150AM1IPBSRQ  TVP5150AM1IPBSRQ1  TVP5150AM1IZQC  TVP5150AM1  
TVP5150AM1IZQCR PDF
TI
Texas Instruments
TVP5150AM1IPBSR Ultralow-Power NTSC/PAL/SECAM Video Decoder

Description
The TVP5150AM1 device is an ultralow-power NTSC/PAL/SECAM video decoder. Available in a space-saving 48-terminal PBGA package or a 32-terminal TQFP package, the TVP5150AM1 decoder converts NTSC, PAL, and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also available. The optimized architecture of the TVP5150AM1 decoder allows for ultralow power consumption.

Features
• Accepts NTSC (J, M, 4.43), PAL (B, D, G, H, I, M, N, Nc), and SECAM (B, D, G, K, K1, L) Video
• Supports ITU-R BT.601 Standard Sampling
• High-Speed 9-Bit Analog-to-Digital Converter (ADC)
• Two Composite Inputs or One S-Video Input
• Fully Differential CMOS Analog Preprocessing
   Channels With Clamping and Automatic Gain
   Control (AGC) for Best Signal-to-Noise (S/N) Performance
• Ultralow Power Consumption
• 48-Terminal PBGA Package (ZQC) or 32-Terminal TQFP Package (PBS)
• Power-Down Mode: <1 mW
• Brightness, Contrast, Saturation, Hue, and Sharpness Control Through I2C
• Complementary 4-Line (3-H Delay) Adaptive Comb Filters for Both Cross-Luminance and Cross-
   Chrominance Noise Reduction
• Patented Architecture for Locking to Weak, Noisy, or Unstable Signals
• Single 14.31818-MHz Crystal for All Standards
• Internal Phase-Locked Loop (PLL) for Line-Locked Clock and Sampling
• Subcarrier Genlock Output for Synchronizing Color Subcarrier of External Encoder
• 3.3-V Digital I/O Supply Voltage Range
• Standard Programmable Video Output Formats
   – ITU-R BT.656, 8-Bit 4:2:2 With Embedded Syncs
   – 8-Bit 4:2:2 With Discrete Syncs
• Macrovision™ Copy Protection Detection
• Advanced Programmable Video Output Formats
   – 2× Oversampled Raw Vertical Blanking Interval (VBI) Data During Active Video
   – Sliced VBI Data During Horizontal Blanking or Active Video
• VBI Modes Supported
   – Teletext (NABTS, WST)
   – Closed-Caption Decode With FIFO and Extended Data Services (XDS)
   – Wide Screen Signaling, Video Program System, CGMS-A, Vertical Interval Time Code
   – Gemstar 1x/2x Electronic Program Guide Compatible Mode
   – Custom Configuration Mode That Allows User to Program Slice Engine for Unique VBI Data
   Signals
• Power-On Reset
• Industrial Temperature Range
   (TVP5150AM1I): –40°C to 85°C
• Qualified for Automotive Applications
   (AEC-Q100 Rev G – TVP5150AM1IPBSQ1, TVP5150AM1IPBSRQ)


other parts : 5150AM1  TVP5150AM1IPBS  TVP5150AM1IPBSQ1  TVP5150AM1IPBSRQ  TVP5150AM1IPBSRQ1  TVP5150AM1IZQC  TVP5150AM1IZQCR  TVP5150AM1  
TVP5150AM1IPBSR PDF
TI
Texas Instruments
TVP5150AM1IPBSRQ Ultralow-Power NTSC/PAL/SECAM Video Decoder

Description
The TVP5150AM1 device is an ultralow-power NTSC/PAL/SECAM video decoder. Available in a space-saving 48-terminal PBGA package or a 32-terminal TQFP package, the TVP5150AM1 decoder converts NTSC, PAL, and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also available. The optimized architecture of the TVP5150AM1 decoder allows for ultralow power consumption.

Features
• Accepts NTSC (J, M, 4.43), PAL (B, D, G, H, I, M, N, Nc), and SECAM (B, D, G, K, K1, L) Video
• Supports ITU-R BT.601 Standard Sampling
• High-Speed 9-Bit Analog-to-Digital Converter (ADC)
• Two Composite Inputs or One S-Video Input
• Fully Differential CMOS Analog Preprocessing
   Channels With Clamping and Automatic Gain
   Control (AGC) for Best Signal-to-Noise (S/N) Performance
• Ultralow Power Consumption
• 48-Terminal PBGA Package (ZQC) or 32-Terminal TQFP Package (PBS)
• Power-Down Mode: <1 mW
• Brightness, Contrast, Saturation, Hue, and Sharpness Control Through I2C
• Complementary 4-Line (3-H Delay) Adaptive Comb Filters for Both Cross-Luminance and Cross-
   Chrominance Noise Reduction
• Patented Architecture for Locking to Weak, Noisy, or Unstable Signals
• Single 14.31818-MHz Crystal for All Standards
• Internal Phase-Locked Loop (PLL) for Line-Locked Clock and Sampling
• Subcarrier Genlock Output for Synchronizing Color Subcarrier of External Encoder
• 3.3-V Digital I/O Supply Voltage Range
• Standard Programmable Video Output Formats
   – ITU-R BT.656, 8-Bit 4:2:2 With Embedded Syncs
   – 8-Bit 4:2:2 With Discrete Syncs
• Macrovision™ Copy Protection Detection
• Advanced Programmable Video Output Formats
   – 2× Oversampled Raw Vertical Blanking Interval (VBI) Data During Active Video
   – Sliced VBI Data During Horizontal Blanking or Active Video
• VBI Modes Supported
   – Teletext (NABTS, WST)
   – Closed-Caption Decode With FIFO and Extended Data Services (XDS)
   – Wide Screen Signaling, Video Program System, CGMS-A, Vertical Interval Time Code
   – Gemstar 1x/2x Electronic Program Guide Compatible Mode
   – Custom Configuration Mode That Allows User to Program Slice Engine for Unique VBI Data
   Signals
• Power-On Reset
• Industrial Temperature Range
   (TVP5150AM1I): –40°C to 85°C
• Qualified for Automotive Applications
   (AEC-Q100 Rev G – TVP5150AM1IPBSQ1, TVP5150AM1IPBSRQ)


other parts : 5150AM1  TVP5150AM1IPBS  TVP5150AM1IPBSQ1  TVP5150AM1IPBSR  TVP5150AM1IPBSRQ1  TVP5150AM1IZQC  TVP5150AM1IZQCR  TVP5150AM1  
TVP5150AM1IPBSRQ PDF

1

2

New and Popular Datasheet

LM317  PN2222A  1N4007  LM324N  SFH4250S  FR2A  PWR-TOP200YAI  TOP210PF1  PM75RSK060  PM75RSK060  PM75RSD060  PM75RSA060  AR9280  GI851  GI851  GI824  RTR6280  PI3HDMI412AD  AR9280  QCA4002  P6CU-1212E  GI824  PT2399  AR8031  Z86E06_04  TNY253GN  TM200RZ-2H  RU-050515  PT2314E  PT2253A  PM6610  PE4259  OPF392A  ISL6525CBZ  CM300DY-24NFH  BUK456-200  BUK456-100A  23Z467SM  MSM8974  SB1060  SFH4250S-R2  PFS708EG  1985881  BA4918  LRG6SP  Q65110A2286  PI5L100  MYS380  1N4448  CBD10120LCT  XPS-4102WG  BTRS-5640G  VTB100H  TSP120A  TDA2030A  Part List  Manufacturers List 


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]