datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Number :
Home  >>>  TPS65950 Datasheet

TPS65950

  

Datasheet PDF

Match, Like TPS65950
Start with TPS65950A* TPS65950B* TPS65950Z*
End N/A
Included N/A
View Details    
Manufacturer Part no Description View
TI
Texas Instruments
TPS65950 Integrated Power Management and Audio Codec – Silicon Revision 1.2

Description
The TPS65950 device is a highly integrated power-management and audio coder/decoder (codec) integrated circuit (IC) that supports the power and peripheral requirements of the OMAP™ application processors. The device contains power management, an audio codec, a universal serial bus (USB) high speed (HS) transceiver, an AC/USB charger, light-emitting diode (LED) drivers, an analog-to-digital converter (ADC), a real-time clock (RTC), and embedded power control.
The power portion of the device contains three buck converters, two controllable by a dedicated SmartReflex class-3 interface, multiple low-dropout (LDO) regulators, an embedded power controller (EPC) to manage the power-sequencing requirements of OMAP, and an RTC and backup module. The RTC can be powered by a backup battery when the main supply is not present, and the device contains a coin-cell charger to recharge the backup battery as needed.
The USB module provides a HS 2.0 on-the-go (OTG) transceiver suitable for direct connection to the OMAP universal transceiver macrocell interface (UTMI) + low pin interface (ULPI) with an integrated charge pump (CP) and full support for the carkit Consumer Electronics Association (CEA)-936A specification.

Features
• Power:
   – Three Efficient Step-down Converters
• VDD1: TPS65950A2 with 1.2 A and
   TPS65950A3 with 1.4 A (for 1-GHz Speed)
• VDD2: 600 mA
• VIO: 700 mA
   – 10 External Linear LDOs for Clocks and
      Peripherals
   – SmartReflex™ Dynamic Voltage Management
• Audio:
   – Voice Codec
   – 15-Bit Linear Codec (8 and 16 kHz)
   – Differential Input Main and Submicrophones
   – Differential Headset Microphone Input
   – Auxiliary/FM Input (Mono or Stereo)
   – Differential 32-Ω Speaker and 16-Ω Headset
      Drivers (External Predrivers for Class D)
   – 8-Ω Stereo Class-D Drivers
   – Pulse Code Modulation (PCM) and TDM
      Interfaces
   – Bluetooth® Interface
   – Automatic Level Control (ALC)
   – Digital and Analog Mixing
   – 16-Bit Linear Audio Stereo DAC (96, 48, 44.1,
      and 32 kHz, and Derivatives)
   – 16-Bit Linear Audio Stereo ADC (48, 44.1, and
      32 kHz, and Derivatives)
   – Digital Microphone Inputs
   – Carkit
• Charger:
   – Li-ion, Li-on Polymer, and Cobalt-Nickel-
      Manganese Charger
   – Supports Charging with AC-Regulated Charger
      (Maximum 7 V), USB Host Devices, Mobile
      Computing Promotion Consortium (MCPC)
      Devices, USB Chargers, and Carkit Chargers
      (Maximum 7 V)
   – Backup Battery Charger
• USB:
   – USB 2.0 OTG-Compliant HS Transceivers
   – 12-Bit ULPI
   – USB Power Supply (5-V CP for VBUS)
   – CEA-2011: OTG Transceiver Interface
      Specification
   – CEA-936A: Mini-USB Analog Carkit Interface
      Specification
   – MCPC ME-Universal Asynchronous
      Receiver/Transmitter (UART) GL-006
      Specification
• Additional Features:
   – LED Driver Circuit for Two External LEDs
   – 10-Bit MADC with 3 to 8 External Inputs
   – RTC and Retention Modules
   – HS Inter-Integrated Circuit (I2C) Serial Control
   – Thermal Shutdown and Hot-Die Detection
   – Keypad Interface (up to 8 × 8)
   – External Vibrator (Vibrator) Control
   – 19 GPIO Devices
   – 0.4-mm Pitch, 209 Pin, 7-mm × 7-mm Package

Applications
• Smart Phones
• Industrial
• Tablets
• Handheld Systems


other parts : TPS65950A2ZXN  TPS65950A2ZXNR  TPS65950A3  TPS65950A3ZXN  TPS65950A3ZXNR  TPS65950BZXN  TPS65950BZXNR  TPS65950ZXN  TPS65950A2  
TPS65950 PDF
TI
Texas Instruments
TPS65950A2 Integrated Power Management and Audio Codec – Silicon Revision 1.2

Description
The TPS65950 device is a highly integrated power-management and audio coder/decoder (codec) integrated circuit (IC) that supports the power and peripheral requirements of the OMAP™ application processors. The device contains power management, an audio codec, a universal serial bus (USB) high speed (HS) transceiver, an AC/USB charger, light-emitting diode (LED) drivers, an analog-to-digital converter (ADC), a real-time clock (RTC), and embedded power control.
The power portion of the device contains three buck converters, two controllable by a dedicated SmartReflex class-3 interface, multiple low-dropout (LDO) regulators, an embedded power controller (EPC) to manage the power-sequencing requirements of OMAP, and an RTC and backup module. The RTC can be powered by a backup battery when the main supply is not present, and the device contains a coin-cell charger to recharge the backup battery as needed.
The USB module provides a HS 2.0 on-the-go (OTG) transceiver suitable for direct connection to the OMAP universal transceiver macrocell interface (UTMI) + low pin interface (ULPI) with an integrated charge pump (CP) and full support for the carkit Consumer Electronics Association (CEA)-936A specification.

Features
• Power:
   – Three Efficient Step-down Converters
• VDD1: TPS65950A2 with 1.2 A and
   TPS65950A3 with 1.4 A (for 1-GHz Speed)
• VDD2: 600 mA
• VIO: 700 mA
   – 10 External Linear LDOs for Clocks and
      Peripherals
   – SmartReflex™ Dynamic Voltage Management
• Audio:
   – Voice Codec
   – 15-Bit Linear Codec (8 and 16 kHz)
   – Differential Input Main and Submicrophones
   – Differential Headset Microphone Input
   – Auxiliary/FM Input (Mono or Stereo)
   – Differential 32-Ω Speaker and 16-Ω Headset
      Drivers (External Predrivers for Class D)
   – 8-Ω Stereo Class-D Drivers
   – Pulse Code Modulation (PCM) and TDM
      Interfaces
   – Bluetooth® Interface
   – Automatic Level Control (ALC)
   – Digital and Analog Mixing
   – 16-Bit Linear Audio Stereo DAC (96, 48, 44.1,
      and 32 kHz, and Derivatives)
   – 16-Bit Linear Audio Stereo ADC (48, 44.1, and
      32 kHz, and Derivatives)
   – Digital Microphone Inputs
   – Carkit
• Charger:
   – Li-ion, Li-on Polymer, and Cobalt-Nickel-
      Manganese Charger
   – Supports Charging with AC-Regulated Charger
      (Maximum 7 V), USB Host Devices, Mobile
      Computing Promotion Consortium (MCPC)
      Devices, USB Chargers, and Carkit Chargers
      (Maximum 7 V)
   – Backup Battery Charger
• USB:
   – USB 2.0 OTG-Compliant HS Transceivers
   – 12-Bit ULPI
   – USB Power Supply (5-V CP for VBUS)
   – CEA-2011: OTG Transceiver Interface
      Specification
   – CEA-936A: Mini-USB Analog Carkit Interface
      Specification
   – MCPC ME-Universal Asynchronous
      Receiver/Transmitter (UART) GL-006
      Specification
• Additional Features:
   – LED Driver Circuit for Two External LEDs
   – 10-Bit MADC with 3 to 8 External Inputs
   – RTC and Retention Modules
   – HS Inter-Integrated Circuit (I2C) Serial Control
   – Thermal Shutdown and Hot-Die Detection
   – Keypad Interface (up to 8 × 8)
   – External Vibrator (Vibrator) Control
   – 19 GPIO Devices
   – 0.4-mm Pitch, 209 Pin, 7-mm × 7-mm Package

Applications
• Smart Phones
• Industrial
• Tablets
• Handheld Systems


other parts : TPS65950  TPS65950A2ZXN  TPS65950A2ZXNR  TPS65950A3  TPS65950A3ZXN  TPS65950A3ZXNR  TPS65950BZXN  TPS65950BZXNR  TPS65950ZXN  
TPS65950A2 PDF
TI
Texas Instruments
TPS65950A3 Integrated Power Management and Audio Codec – Silicon Revision 1.2

Description
The TPS65950 device is a highly integrated power-management and audio coder/decoder (codec) integrated circuit (IC) that supports the power and peripheral requirements of the OMAP™ application processors. The device contains power management, an audio codec, a universal serial bus (USB) high speed (HS) transceiver, an AC/USB charger, light-emitting diode (LED) drivers, an analog-to-digital converter (ADC), a real-time clock (RTC), and embedded power control.
The power portion of the device contains three buck converters, two controllable by a dedicated SmartReflex class-3 interface, multiple low-dropout (LDO) regulators, an embedded power controller (EPC) to manage the power-sequencing requirements of OMAP, and an RTC and backup module. The RTC can be powered by a backup battery when the main supply is not present, and the device contains a coin-cell charger to recharge the backup battery as needed.
The USB module provides a HS 2.0 on-the-go (OTG) transceiver suitable for direct connection to the OMAP universal transceiver macrocell interface (UTMI) + low pin interface (ULPI) with an integrated charge pump (CP) and full support for the carkit Consumer Electronics Association (CEA)-936A specification.

Features
• Power:
   – Three Efficient Step-down Converters
• VDD1: TPS65950A2 with 1.2 A and
   TPS65950A3 with 1.4 A (for 1-GHz Speed)
• VDD2: 600 mA
• VIO: 700 mA
   – 10 External Linear LDOs for Clocks and
      Peripherals
   – SmartReflex™ Dynamic Voltage Management
• Audio:
   – Voice Codec
   – 15-Bit Linear Codec (8 and 16 kHz)
   – Differential Input Main and Submicrophones
   – Differential Headset Microphone Input
   – Auxiliary/FM Input (Mono or Stereo)
   – Differential 32-Ω Speaker and 16-Ω Headset
      Drivers (External Predrivers for Class D)
   – 8-Ω Stereo Class-D Drivers
   – Pulse Code Modulation (PCM) and TDM
      Interfaces
   – Bluetooth® Interface
   – Automatic Level Control (ALC)
   – Digital and Analog Mixing
   – 16-Bit Linear Audio Stereo DAC (96, 48, 44.1,
      and 32 kHz, and Derivatives)
   – 16-Bit Linear Audio Stereo ADC (48, 44.1, and
      32 kHz, and Derivatives)
   – Digital Microphone Inputs
   – Carkit
• Charger:
   – Li-ion, Li-on Polymer, and Cobalt-Nickel-
      Manganese Charger
   – Supports Charging with AC-Regulated Charger
      (Maximum 7 V), USB Host Devices, Mobile
      Computing Promotion Consortium (MCPC)
      Devices, USB Chargers, and Carkit Chargers
      (Maximum 7 V)
   – Backup Battery Charger
• USB:
   – USB 2.0 OTG-Compliant HS Transceivers
   – 12-Bit ULPI
   – USB Power Supply (5-V CP for VBUS)
   – CEA-2011: OTG Transceiver Interface
      Specification
   – CEA-936A: Mini-USB Analog Carkit Interface
      Specification
   – MCPC ME-Universal Asynchronous
      Receiver/Transmitter (UART) GL-006
      Specification
• Additional Features:
   – LED Driver Circuit for Two External LEDs
   – 10-Bit MADC with 3 to 8 External Inputs
   – RTC and Retention Modules
   – HS Inter-Integrated Circuit (I2C) Serial Control
   – Thermal Shutdown and Hot-Die Detection
   – Keypad Interface (up to 8 × 8)
   – External Vibrator (Vibrator) Control
   – 19 GPIO Devices
   – 0.4-mm Pitch, 209 Pin, 7-mm × 7-mm Package

Applications
• Smart Phones
• Industrial
• Tablets
• Handheld Systems


other parts : TPS65950  TPS65950A2ZXN  TPS65950A2ZXNR  TPS65950A3ZXN  TPS65950A3ZXNR  TPS65950BZXN  TPS65950BZXNR  TPS65950ZXN  TPS65950A2  
TPS65950A3 PDF
TI
Texas Instruments
TPS65950ZXN Integrated Power Management and Audio Codec – Silicon Revision 1.2

Description
The TPS65950 device is a highly integrated power-management and audio coder/decoder (codec) integrated circuit (IC) that supports the power and peripheral requirements of the OMAP™ application processors. The device contains power management, an audio codec, a universal serial bus (USB) high speed (HS) transceiver, an AC/USB charger, light-emitting diode (LED) drivers, an analog-to-digital converter (ADC), a real-time clock (RTC), and embedded power control.
The power portion of the device contains three buck converters, two controllable by a dedicated SmartReflex class-3 interface, multiple low-dropout (LDO) regulators, an embedded power controller (EPC) to manage the power-sequencing requirements of OMAP, and an RTC and backup module. The RTC can be powered by a backup battery when the main supply is not present, and the device contains a coin-cell charger to recharge the backup battery as needed.
The USB module provides a HS 2.0 on-the-go (OTG) transceiver suitable for direct connection to the OMAP universal transceiver macrocell interface (UTMI) + low pin interface (ULPI) with an integrated charge pump (CP) and full support for the carkit Consumer Electronics Association (CEA)-936A specification.

Features
• Power:
   – Three Efficient Step-down Converters
• VDD1: TPS65950A2 with 1.2 A and
   TPS65950A3 with 1.4 A (for 1-GHz Speed)
• VDD2: 600 mA
• VIO: 700 mA
   – 10 External Linear LDOs for Clocks and
      Peripherals
   – SmartReflex™ Dynamic Voltage Management
• Audio:
   – Voice Codec
   – 15-Bit Linear Codec (8 and 16 kHz)
   – Differential Input Main and Submicrophones
   – Differential Headset Microphone Input
   – Auxiliary/FM Input (Mono or Stereo)
   – Differential 32-Ω Speaker and 16-Ω Headset
      Drivers (External Predrivers for Class D)
   – 8-Ω Stereo Class-D Drivers
   – Pulse Code Modulation (PCM) and TDM
      Interfaces
   – Bluetooth® Interface
   – Automatic Level Control (ALC)
   – Digital and Analog Mixing
   – 16-Bit Linear Audio Stereo DAC (96, 48, 44.1,
      and 32 kHz, and Derivatives)
   – 16-Bit Linear Audio Stereo ADC (48, 44.1, and
      32 kHz, and Derivatives)
   – Digital Microphone Inputs
   – Carkit
• Charger:
   – Li-ion, Li-on Polymer, and Cobalt-Nickel-
      Manganese Charger
   – Supports Charging with AC-Regulated Charger
      (Maximum 7 V), USB Host Devices, Mobile
      Computing Promotion Consortium (MCPC)
      Devices, USB Chargers, and Carkit Chargers
      (Maximum 7 V)
   – Backup Battery Charger
• USB:
   – USB 2.0 OTG-Compliant HS Transceivers
   – 12-Bit ULPI
   – USB Power Supply (5-V CP for VBUS)
   – CEA-2011: OTG Transceiver Interface
      Specification
   – CEA-936A: Mini-USB Analog Carkit Interface
      Specification
   – MCPC ME-Universal Asynchronous
      Receiver/Transmitter (UART) GL-006
      Specification
• Additional Features:
   – LED Driver Circuit for Two External LEDs
   – 10-Bit MADC with 3 to 8 External Inputs
   – RTC and Retention Modules
   – HS Inter-Integrated Circuit (I2C) Serial Control
   – Thermal Shutdown and Hot-Die Detection
   – Keypad Interface (up to 8 × 8)
   – External Vibrator (Vibrator) Control
   – 19 GPIO Devices
   – 0.4-mm Pitch, 209 Pin, 7-mm × 7-mm Package

Applications
• Smart Phones
• Industrial
• Tablets
• Handheld Systems


other parts : TPS65950  TPS65950A2ZXN  TPS65950A2ZXNR  TPS65950A3  TPS65950A3ZXN  TPS65950A3ZXNR  TPS65950BZXN  TPS65950BZXNR  TPS65950A2  
TPS65950ZXN PDF
TI
Texas Instruments
TPS65950BZXN Integrated Power Management/Audio Codec Silicon Revision 1.2

Introduction
The TPS65950 device is a highly integrated power-management and audio coder/decoder (codec) integrated circuit (IC) that supports the power and peripheral requirements of the OMAP™ application processors. The device contains power management, an audio codec, a universal serial bus (USB) high-speed (HS) transceiver, an ac/USB charger, light-emitting diode (LED) drivers, an analog-to-digital converter (ADC), a real-time clock (RTC), and embedded power control.
The power portion of the device contains three buck converters, two controllable by a dedicated SmartReflex™ class-3 interface, multiple low-dropout (LDO) regulators, an embedded power controller (EPC) to manage the power-sequencing requirements of OMAP, and an RTC and backup module. The RTC can be powered by a backup battery when the main supply is not present, and the device contains a coin-cell charger to recharge the backup battery as needed.
The USB module provides a HS 2.0 on-the-go (OTG) transceiver suitable for direct connection to the OMAP universal transceiver macrocell interface (UTMI) + low pin interface (ULPI) with an integrated charge pump (CP) and full support for the carkit Consumer Electronics Association (CEA)-936A specification.

Features
• Power:
   – Three efficient stepdown converters
• VDD1: TPS65950A2 with 1.2A and
   TPS65950A3 with 1.4A (for 1GHz speed)
• VDD2: 600mA
• VIO: 700mA
   – 10 external linear LDOs for clocks and
      peripherals
   – SmartReflex dynamic voltage management
• Audio:
   – Voice codec
   – 15-bit linear codec (8 and 16 kHz)
   – Differential input main and submicrophones
   – Differential headset microphone input
   – Auxiliary/FM input (mono or stereo)
   – Differential 32-Ω speaker and 16-Ω headset
      drivers (external predrivers for class D)
   – 8-Ω stereo class-D drivers
   – Pulse code modulation (PCM) and TDM
      interfaces
   – Bluetooth® interface
   – Automatic level control (ALC)
   – Digital and analog mixing
   – 16-bit linear audio stereo DAC (96, 48, 44.1,
      and 32 kHz, and derivatives)
   – 16-bit linear audio stereo ADC (48, 44.1, and
      32 kHz, and derivatives)
   – Digital microphone inputs
   – Carkit
• Charger:
   – Li-ion, Li-on polymer, and
      cobalt-nickel-manganese charger
   – Supports charging with ac-regulated charger
      (maximum 7 V), USB host devices, Mobile
      Computing Promotion Consortium (MCPC)
      devices, USB chargers, and carkit chargers
      (maximum 7 V)
   – Backup battery charger
• USB:
   – USB 2.0 OTG-compliant HS transceivers
   – 12-bit ULPI
   – USB power supply (5-V CP for VBUS)
   – CEA-2011: OTG transceiver interface
      specification
   – CEA-936A: Mini-USB analog carkit interface
      specification
   – MCPC ME-universal asynchronous
      receiver/transmitter (UART) GL-006
      specification
• Additional features:
   – LED driver circuit for two external LEDs
   – 10-bit MADC with 3 to 8 external inputs
   – RTC and retention modules
   – HS inter-integrated circuit (I2C™) serial
      control
   – Thermal shutdown and hot-die detection
   – Keypad interface (up to 8 × 8)
   – External vibrator (vibrator) control
   – 19 GPIO devices
   – 0.4-mm pitch, 209 pin, 7 × 7 mm package


other parts : TPS65950BZXNR  
TPS65950BZXN PDF
TI
Texas Instruments
TPS65950BZXN Integrated Power Management and Audio Codec – Silicon Revision 1.2

Description
The TPS65950 device is a highly integrated power-management and audio coder/decoder (codec) integrated circuit (IC) that supports the power and peripheral requirements of the OMAP™ application processors. The device contains power management, an audio codec, a universal serial bus (USB) high speed (HS) transceiver, an AC/USB charger, light-emitting diode (LED) drivers, an analog-to-digital converter (ADC), a real-time clock (RTC), and embedded power control.
The power portion of the device contains three buck converters, two controllable by a dedicated SmartReflex class-3 interface, multiple low-dropout (LDO) regulators, an embedded power controller (EPC) to manage the power-sequencing requirements of OMAP, and an RTC and backup module. The RTC can be powered by a backup battery when the main supply is not present, and the device contains a coin-cell charger to recharge the backup battery as needed.
The USB module provides a HS 2.0 on-the-go (OTG) transceiver suitable for direct connection to the OMAP universal transceiver macrocell interface (UTMI) + low pin interface (ULPI) with an integrated charge pump (CP) and full support for the carkit Consumer Electronics Association (CEA)-936A specification.

Features
• Power:
   – Three Efficient Step-down Converters
• VDD1: TPS65950A2 with 1.2 A and
   TPS65950A3 with 1.4 A (for 1-GHz Speed)
• VDD2: 600 mA
• VIO: 700 mA
   – 10 External Linear LDOs for Clocks and
      Peripherals
   – SmartReflex™ Dynamic Voltage Management
• Audio:
   – Voice Codec
   – 15-Bit Linear Codec (8 and 16 kHz)
   – Differential Input Main and Submicrophones
   – Differential Headset Microphone Input
   – Auxiliary/FM Input (Mono or Stereo)
   – Differential 32-Ω Speaker and 16-Ω Headset
      Drivers (External Predrivers for Class D)
   – 8-Ω Stereo Class-D Drivers
   – Pulse Code Modulation (PCM) and TDM
      Interfaces
   – Bluetooth® Interface
   – Automatic Level Control (ALC)
   – Digital and Analog Mixing
   – 16-Bit Linear Audio Stereo DAC (96, 48, 44.1,
      and 32 kHz, and Derivatives)
   – 16-Bit Linear Audio Stereo ADC (48, 44.1, and
      32 kHz, and Derivatives)
   – Digital Microphone Inputs
   – Carkit
• Charger:
   – Li-ion, Li-on Polymer, and Cobalt-Nickel-
      Manganese Charger
   – Supports Charging with AC-Regulated Charger
      (Maximum 7 V), USB Host Devices, Mobile
      Computing Promotion Consortium (MCPC)
      Devices, USB Chargers, and Carkit Chargers
      (Maximum 7 V)
   – Backup Battery Charger
• USB:
   – USB 2.0 OTG-Compliant HS Transceivers
   – 12-Bit ULPI
   – USB Power Supply (5-V CP for VBUS)
   – CEA-2011: OTG Transceiver Interface
      Specification
   – CEA-936A: Mini-USB Analog Carkit Interface
      Specification
   – MCPC ME-Universal Asynchronous
      Receiver/Transmitter (UART) GL-006
      Specification
• Additional Features:
   – LED Driver Circuit for Two External LEDs
   – 10-Bit MADC with 3 to 8 External Inputs
   – RTC and Retention Modules
   – HS Inter-Integrated Circuit (I2C) Serial Control
   – Thermal Shutdown and Hot-Die Detection
   – Keypad Interface (up to 8 × 8)
   – External Vibrator (Vibrator) Control
   – 19 GPIO Devices
   – 0.4-mm Pitch, 209 Pin, 7-mm × 7-mm Package

Applications
• Smart Phones
• Industrial
• Tablets
• Handheld Systems


other parts : TPS65950  TPS65950A2ZXN  TPS65950A2ZXNR  TPS65950A3  TPS65950A3ZXN  TPS65950A3ZXNR  TPS65950BZXNR  TPS65950ZXN  TPS65950A2  
TPS65950BZXN PDF
TI
Texas Instruments
TPS65950BZXNR Integrated Power Management/Audio Codec Silicon Revision 1.2

Introduction
The TPS65950 device is a highly integrated power-management and audio coder/decoder (codec) integrated circuit (IC) that supports the power and peripheral requirements of the OMAP™ application processors. The device contains power management, an audio codec, a universal serial bus (USB) high-speed (HS) transceiver, an ac/USB charger, light-emitting diode (LED) drivers, an analog-to-digital converter (ADC), a real-time clock (RTC), and embedded power control.
The power portion of the device contains three buck converters, two controllable by a dedicated SmartReflex™ class-3 interface, multiple low-dropout (LDO) regulators, an embedded power controller (EPC) to manage the power-sequencing requirements of OMAP, and an RTC and backup module. The RTC can be powered by a backup battery when the main supply is not present, and the device contains a coin-cell charger to recharge the backup battery as needed.
The USB module provides a HS 2.0 on-the-go (OTG) transceiver suitable for direct connection to the OMAP universal transceiver macrocell interface (UTMI) + low pin interface (ULPI) with an integrated charge pump (CP) and full support for the carkit Consumer Electronics Association (CEA)-936A specification.

Features
• Power:
   – Three efficient stepdown converters
• VDD1: TPS65950A2 with 1.2A and
   TPS65950A3 with 1.4A (for 1GHz speed)
• VDD2: 600mA
• VIO: 700mA
   – 10 external linear LDOs for clocks and
      peripherals
   – SmartReflex dynamic voltage management
• Audio:
   – Voice codec
   – 15-bit linear codec (8 and 16 kHz)
   – Differential input main and submicrophones
   – Differential headset microphone input
   – Auxiliary/FM input (mono or stereo)
   – Differential 32-Ω speaker and 16-Ω headset
      drivers (external predrivers for class D)
   – 8-Ω stereo class-D drivers
   – Pulse code modulation (PCM) and TDM
      interfaces
   – Bluetooth® interface
   – Automatic level control (ALC)
   – Digital and analog mixing
   – 16-bit linear audio stereo DAC (96, 48, 44.1,
      and 32 kHz, and derivatives)
   – 16-bit linear audio stereo ADC (48, 44.1, and
      32 kHz, and derivatives)
   – Digital microphone inputs
   – Carkit
• Charger:
   – Li-ion, Li-on polymer, and
      cobalt-nickel-manganese charger
   – Supports charging with ac-regulated charger
      (maximum 7 V), USB host devices, Mobile
      Computing Promotion Consortium (MCPC)
      devices, USB chargers, and carkit chargers
      (maximum 7 V)
   – Backup battery charger
• USB:
   – USB 2.0 OTG-compliant HS transceivers
   – 12-bit ULPI
   – USB power supply (5-V CP for VBUS)
   – CEA-2011: OTG transceiver interface
      specification
   – CEA-936A: Mini-USB analog carkit interface
      specification
   – MCPC ME-universal asynchronous
      receiver/transmitter (UART) GL-006
      specification
• Additional features:
   – LED driver circuit for two external LEDs
   – 10-bit MADC with 3 to 8 external inputs
   – RTC and retention modules
   – HS inter-integrated circuit (I2C™) serial
      control
   – Thermal shutdown and hot-die detection
   – Keypad interface (up to 8 × 8)
   – External vibrator (vibrator) control
   – 19 GPIO devices
   – 0.4-mm pitch, 209 pin, 7 × 7 mm package


other parts : TPS65950BZXN  
TPS65950BZXNR PDF
TI
Texas Instruments
TPS65950A3ZXN Integrated Power Management and Audio Codec – Silicon Revision 1.2

Description
The TPS65950 device is a highly integrated power-management and audio coder/decoder (codec) integrated circuit (IC) that supports the power and peripheral requirements of the OMAP™ application processors. The device contains power management, an audio codec, a universal serial bus (USB) high speed (HS) transceiver, an AC/USB charger, light-emitting diode (LED) drivers, an analog-to-digital converter (ADC), a real-time clock (RTC), and embedded power control.
The power portion of the device contains three buck converters, two controllable by a dedicated SmartReflex class-3 interface, multiple low-dropout (LDO) regulators, an embedded power controller (EPC) to manage the power-sequencing requirements of OMAP, and an RTC and backup module. The RTC can be powered by a backup battery when the main supply is not present, and the device contains a coin-cell charger to recharge the backup battery as needed.
The USB module provides a HS 2.0 on-the-go (OTG) transceiver suitable for direct connection to the OMAP universal transceiver macrocell interface (UTMI) + low pin interface (ULPI) with an integrated charge pump (CP) and full support for the carkit Consumer Electronics Association (CEA)-936A specification.

Features
• Power:
   – Three Efficient Step-down Converters
• VDD1: TPS65950A2 with 1.2 A and
   TPS65950A3 with 1.4 A (for 1-GHz Speed)
• VDD2: 600 mA
• VIO: 700 mA
   – 10 External Linear LDOs for Clocks and
      Peripherals
   – SmartReflex™ Dynamic Voltage Management
• Audio:
   – Voice Codec
   – 15-Bit Linear Codec (8 and 16 kHz)
   – Differential Input Main and Submicrophones
   – Differential Headset Microphone Input
   – Auxiliary/FM Input (Mono or Stereo)
   – Differential 32-Ω Speaker and 16-Ω Headset
      Drivers (External Predrivers for Class D)
   – 8-Ω Stereo Class-D Drivers
   – Pulse Code Modulation (PCM) and TDM
      Interfaces
   – Bluetooth® Interface
   – Automatic Level Control (ALC)
   – Digital and Analog Mixing
   – 16-Bit Linear Audio Stereo DAC (96, 48, 44.1,
      and 32 kHz, and Derivatives)
   – 16-Bit Linear Audio Stereo ADC (48, 44.1, and
      32 kHz, and Derivatives)
   – Digital Microphone Inputs
   – Carkit
• Charger:
   – Li-ion, Li-on Polymer, and Cobalt-Nickel-
      Manganese Charger
   – Supports Charging with AC-Regulated Charger
      (Maximum 7 V), USB Host Devices, Mobile
      Computing Promotion Consortium (MCPC)
      Devices, USB Chargers, and Carkit Chargers
      (Maximum 7 V)
   – Backup Battery Charger
• USB:
   – USB 2.0 OTG-Compliant HS Transceivers
   – 12-Bit ULPI
   – USB Power Supply (5-V CP for VBUS)
   – CEA-2011: OTG Transceiver Interface
      Specification
   – CEA-936A: Mini-USB Analog Carkit Interface
      Specification
   – MCPC ME-Universal Asynchronous
      Receiver/Transmitter (UART) GL-006
      Specification
• Additional Features:
   – LED Driver Circuit for Two External LEDs
   – 10-Bit MADC with 3 to 8 External Inputs
   – RTC and Retention Modules
   – HS Inter-Integrated Circuit (I2C) Serial Control
   – Thermal Shutdown and Hot-Die Detection
   – Keypad Interface (up to 8 × 8)
   – External Vibrator (Vibrator) Control
   – 19 GPIO Devices
   – 0.4-mm Pitch, 209 Pin, 7-mm × 7-mm Package

Applications
• Smart Phones
• Industrial
• Tablets
• Handheld Systems


other parts : TPS65950  TPS65950A2ZXN  TPS65950A2ZXNR  TPS65950A3  TPS65950A3ZXNR  TPS65950BZXN  TPS65950BZXNR  TPS65950ZXN  TPS65950A2  
TPS65950A3ZXN PDF
TI
Texas Instruments
TPS65950A2ZXN Integrated Power Management and Audio Codec – Silicon Revision 1.2

Description
The TPS65950 device is a highly integrated power-management and audio coder/decoder (codec) integrated circuit (IC) that supports the power and peripheral requirements of the OMAP™ application processors. The device contains power management, an audio codec, a universal serial bus (USB) high speed (HS) transceiver, an AC/USB charger, light-emitting diode (LED) drivers, an analog-to-digital converter (ADC), a real-time clock (RTC), and embedded power control.
The power portion of the device contains three buck converters, two controllable by a dedicated SmartReflex class-3 interface, multiple low-dropout (LDO) regulators, an embedded power controller (EPC) to manage the power-sequencing requirements of OMAP, and an RTC and backup module. The RTC can be powered by a backup battery when the main supply is not present, and the device contains a coin-cell charger to recharge the backup battery as needed.
The USB module provides a HS 2.0 on-the-go (OTG) transceiver suitable for direct connection to the OMAP universal transceiver macrocell interface (UTMI) + low pin interface (ULPI) with an integrated charge pump (CP) and full support for the carkit Consumer Electronics Association (CEA)-936A specification.

Features
• Power:
   – Three Efficient Step-down Converters
• VDD1: TPS65950A2 with 1.2 A and
   TPS65950A3 with 1.4 A (for 1-GHz Speed)
• VDD2: 600 mA
• VIO: 700 mA
   – 10 External Linear LDOs for Clocks and
      Peripherals
   – SmartReflex™ Dynamic Voltage Management
• Audio:
   – Voice Codec
   – 15-Bit Linear Codec (8 and 16 kHz)
   – Differential Input Main and Submicrophones
   – Differential Headset Microphone Input
   – Auxiliary/FM Input (Mono or Stereo)
   – Differential 32-Ω Speaker and 16-Ω Headset
      Drivers (External Predrivers for Class D)
   – 8-Ω Stereo Class-D Drivers
   – Pulse Code Modulation (PCM) and TDM
      Interfaces
   – Bluetooth® Interface
   – Automatic Level Control (ALC)
   – Digital and Analog Mixing
   – 16-Bit Linear Audio Stereo DAC (96, 48, 44.1,
      and 32 kHz, and Derivatives)
   – 16-Bit Linear Audio Stereo ADC (48, 44.1, and
      32 kHz, and Derivatives)
   – Digital Microphone Inputs
   – Carkit
• Charger:
   – Li-ion, Li-on Polymer, and Cobalt-Nickel-
      Manganese Charger
   – Supports Charging with AC-Regulated Charger
      (Maximum 7 V), USB Host Devices, Mobile
      Computing Promotion Consortium (MCPC)
      Devices, USB Chargers, and Carkit Chargers
      (Maximum 7 V)
   – Backup Battery Charger
• USB:
   – USB 2.0 OTG-Compliant HS Transceivers
   – 12-Bit ULPI
   – USB Power Supply (5-V CP for VBUS)
   – CEA-2011: OTG Transceiver Interface
      Specification
   – CEA-936A: Mini-USB Analog Carkit Interface
      Specification
   – MCPC ME-Universal Asynchronous
      Receiver/Transmitter (UART) GL-006
      Specification
• Additional Features:
   – LED Driver Circuit for Two External LEDs
   – 10-Bit MADC with 3 to 8 External Inputs
   – RTC and Retention Modules
   – HS Inter-Integrated Circuit (I2C) Serial Control
   – Thermal Shutdown and Hot-Die Detection
   – Keypad Interface (up to 8 × 8)
   – External Vibrator (Vibrator) Control
   – 19 GPIO Devices
   – 0.4-mm Pitch, 209 Pin, 7-mm × 7-mm Package

Applications
• Smart Phones
• Industrial
• Tablets
• Handheld Systems


other parts : TPS65950  TPS65950A2ZXNR  TPS65950A3  TPS65950A3ZXN  TPS65950A3ZXNR  TPS65950BZXN  TPS65950BZXNR  TPS65950ZXN  TPS65950A2  
TPS65950A2ZXN PDF
TI
Texas Instruments
TPS65950BZXNR Integrated Power Management and Audio Codec – Silicon Revision 1.2

Description
The TPS65950 device is a highly integrated power-management and audio coder/decoder (codec) integrated circuit (IC) that supports the power and peripheral requirements of the OMAP™ application processors. The device contains power management, an audio codec, a universal serial bus (USB) high speed (HS) transceiver, an AC/USB charger, light-emitting diode (LED) drivers, an analog-to-digital converter (ADC), a real-time clock (RTC), and embedded power control.
The power portion of the device contains three buck converters, two controllable by a dedicated SmartReflex class-3 interface, multiple low-dropout (LDO) regulators, an embedded power controller (EPC) to manage the power-sequencing requirements of OMAP, and an RTC and backup module. The RTC can be powered by a backup battery when the main supply is not present, and the device contains a coin-cell charger to recharge the backup battery as needed.
The USB module provides a HS 2.0 on-the-go (OTG) transceiver suitable for direct connection to the OMAP universal transceiver macrocell interface (UTMI) + low pin interface (ULPI) with an integrated charge pump (CP) and full support for the carkit Consumer Electronics Association (CEA)-936A specification.

Features
• Power:
   – Three Efficient Step-down Converters
• VDD1: TPS65950A2 with 1.2 A and
   TPS65950A3 with 1.4 A (for 1-GHz Speed)
• VDD2: 600 mA
• VIO: 700 mA
   – 10 External Linear LDOs for Clocks and
      Peripherals
   – SmartReflex™ Dynamic Voltage Management
• Audio:
   – Voice Codec
   – 15-Bit Linear Codec (8 and 16 kHz)
   – Differential Input Main and Submicrophones
   – Differential Headset Microphone Input
   – Auxiliary/FM Input (Mono or Stereo)
   – Differential 32-Ω Speaker and 16-Ω Headset
      Drivers (External Predrivers for Class D)
   – 8-Ω Stereo Class-D Drivers
   – Pulse Code Modulation (PCM) and TDM
      Interfaces
   – Bluetooth® Interface
   – Automatic Level Control (ALC)
   – Digital and Analog Mixing
   – 16-Bit Linear Audio Stereo DAC (96, 48, 44.1,
      and 32 kHz, and Derivatives)
   – 16-Bit Linear Audio Stereo ADC (48, 44.1, and
      32 kHz, and Derivatives)
   – Digital Microphone Inputs
   – Carkit
• Charger:
   – Li-ion, Li-on Polymer, and Cobalt-Nickel-
      Manganese Charger
   – Supports Charging with AC-Regulated Charger
      (Maximum 7 V), USB Host Devices, Mobile
      Computing Promotion Consortium (MCPC)
      Devices, USB Chargers, and Carkit Chargers
      (Maximum 7 V)
   – Backup Battery Charger
• USB:
   – USB 2.0 OTG-Compliant HS Transceivers
   – 12-Bit ULPI
   – USB Power Supply (5-V CP for VBUS)
   – CEA-2011: OTG Transceiver Interface
      Specification
   – CEA-936A: Mini-USB Analog Carkit Interface
      Specification
   – MCPC ME-Universal Asynchronous
      Receiver/Transmitter (UART) GL-006
      Specification
• Additional Features:
   – LED Driver Circuit for Two External LEDs
   – 10-Bit MADC with 3 to 8 External Inputs
   – RTC and Retention Modules
   – HS Inter-Integrated Circuit (I2C) Serial Control
   – Thermal Shutdown and Hot-Die Detection
   – Keypad Interface (up to 8 × 8)
   – External Vibrator (Vibrator) Control
   – 19 GPIO Devices
   – 0.4-mm Pitch, 209 Pin, 7-mm × 7-mm Package

Applications
• Smart Phones
• Industrial
• Tablets
• Handheld Systems


other parts : TPS65950  TPS65950A2ZXN  TPS65950A2ZXNR  TPS65950A3  TPS65950A3ZXN  TPS65950A3ZXNR  TPS65950BZXN  TPS65950ZXN  TPS65950A2  
TPS65950BZXNR PDF
TI
Texas Instruments
TPS65950A2ZXNR Integrated Power Management and Audio Codec – Silicon Revision 1.2

Description
The TPS65950 device is a highly integrated power-management and audio coder/decoder (codec) integrated circuit (IC) that supports the power and peripheral requirements of the OMAP™ application processors. The device contains power management, an audio codec, a universal serial bus (USB) high speed (HS) transceiver, an AC/USB charger, light-emitting diode (LED) drivers, an analog-to-digital converter (ADC), a real-time clock (RTC), and embedded power control.
The power portion of the device contains three buck converters, two controllable by a dedicated SmartReflex class-3 interface, multiple low-dropout (LDO) regulators, an embedded power controller (EPC) to manage the power-sequencing requirements of OMAP, and an RTC and backup module. The RTC can be powered by a backup battery when the main supply is not present, and the device contains a coin-cell charger to recharge the backup battery as needed.
The USB module provides a HS 2.0 on-the-go (OTG) transceiver suitable for direct connection to the OMAP universal transceiver macrocell interface (UTMI) + low pin interface (ULPI) with an integrated charge pump (CP) and full support for the carkit Consumer Electronics Association (CEA)-936A specification.

Features
• Power:
   – Three Efficient Step-down Converters
• VDD1: TPS65950A2 with 1.2 A and
   TPS65950A3 with 1.4 A (for 1-GHz Speed)
• VDD2: 600 mA
• VIO: 700 mA
   – 10 External Linear LDOs for Clocks and
      Peripherals
   – SmartReflex™ Dynamic Voltage Management
• Audio:
   – Voice Codec
   – 15-Bit Linear Codec (8 and 16 kHz)
   – Differential Input Main and Submicrophones
   – Differential Headset Microphone Input
   – Auxiliary/FM Input (Mono or Stereo)
   – Differential 32-Ω Speaker and 16-Ω Headset
      Drivers (External Predrivers for Class D)
   – 8-Ω Stereo Class-D Drivers
   – Pulse Code Modulation (PCM) and TDM
      Interfaces
   – Bluetooth® Interface
   – Automatic Level Control (ALC)
   – Digital and Analog Mixing
   – 16-Bit Linear Audio Stereo DAC (96, 48, 44.1,
      and 32 kHz, and Derivatives)
   – 16-Bit Linear Audio Stereo ADC (48, 44.1, and
      32 kHz, and Derivatives)
   – Digital Microphone Inputs
   – Carkit
• Charger:
   – Li-ion, Li-on Polymer, and Cobalt-Nickel-
      Manganese Charger
   – Supports Charging with AC-Regulated Charger
      (Maximum 7 V), USB Host Devices, Mobile
      Computing Promotion Consortium (MCPC)
      Devices, USB Chargers, and Carkit Chargers
      (Maximum 7 V)
   – Backup Battery Charger
• USB:
   – USB 2.0 OTG-Compliant HS Transceivers
   – 12-Bit ULPI
   – USB Power Supply (5-V CP for VBUS)
   – CEA-2011: OTG Transceiver Interface
      Specification
   – CEA-936A: Mini-USB Analog Carkit Interface
      Specification
   – MCPC ME-Universal Asynchronous
      Receiver/Transmitter (UART) GL-006
      Specification
• Additional Features:
   – LED Driver Circuit for Two External LEDs
   – 10-Bit MADC with 3 to 8 External Inputs
   – RTC and Retention Modules
   – HS Inter-Integrated Circuit (I2C) Serial Control
   – Thermal Shutdown and Hot-Die Detection
   – Keypad Interface (up to 8 × 8)
   – External Vibrator (Vibrator) Control
   – 19 GPIO Devices
   – 0.4-mm Pitch, 209 Pin, 7-mm × 7-mm Package

Applications
• Smart Phones
• Industrial
• Tablets
• Handheld Systems


other parts : TPS65950  TPS65950A2ZXN  TPS65950A3  TPS65950A3ZXN  TPS65950A3ZXNR  TPS65950BZXN  TPS65950BZXNR  TPS65950ZXN  TPS65950A2  
TPS65950A2ZXNR PDF
TI
Texas Instruments
TPS65950A3ZXNR Integrated Power Management and Audio Codec – Silicon Revision 1.2

Description
The TPS65950 device is a highly integrated power-management and audio coder/decoder (codec) integrated circuit (IC) that supports the power and peripheral requirements of the OMAP™ application processors. The device contains power management, an audio codec, a universal serial bus (USB) high speed (HS) transceiver, an AC/USB charger, light-emitting diode (LED) drivers, an analog-to-digital converter (ADC), a real-time clock (RTC), and embedded power control.
The power portion of the device contains three buck converters, two controllable by a dedicated SmartReflex class-3 interface, multiple low-dropout (LDO) regulators, an embedded power controller (EPC) to manage the power-sequencing requirements of OMAP, and an RTC and backup module. The RTC can be powered by a backup battery when the main supply is not present, and the device contains a coin-cell charger to recharge the backup battery as needed.
The USB module provides a HS 2.0 on-the-go (OTG) transceiver suitable for direct connection to the OMAP universal transceiver macrocell interface (UTMI) + low pin interface (ULPI) with an integrated charge pump (CP) and full support for the carkit Consumer Electronics Association (CEA)-936A specification.

Features
• Power:
   – Three Efficient Step-down Converters
• VDD1: TPS65950A2 with 1.2 A and
   TPS65950A3 with 1.4 A (for 1-GHz Speed)
• VDD2: 600 mA
• VIO: 700 mA
   – 10 External Linear LDOs for Clocks and
      Peripherals
   – SmartReflex™ Dynamic Voltage Management
• Audio:
   – Voice Codec
   – 15-Bit Linear Codec (8 and 16 kHz)
   – Differential Input Main and Submicrophones
   – Differential Headset Microphone Input
   – Auxiliary/FM Input (Mono or Stereo)
   – Differential 32-Ω Speaker and 16-Ω Headset
      Drivers (External Predrivers for Class D)
   – 8-Ω Stereo Class-D Drivers
   – Pulse Code Modulation (PCM) and TDM
      Interfaces
   – Bluetooth® Interface
   – Automatic Level Control (ALC)
   – Digital and Analog Mixing
   – 16-Bit Linear Audio Stereo DAC (96, 48, 44.1,
      and 32 kHz, and Derivatives)
   – 16-Bit Linear Audio Stereo ADC (48, 44.1, and
      32 kHz, and Derivatives)
   – Digital Microphone Inputs
   – Carkit
• Charger:
   – Li-ion, Li-on Polymer, and Cobalt-Nickel-
      Manganese Charger
   – Supports Charging with AC-Regulated Charger
      (Maximum 7 V), USB Host Devices, Mobile
      Computing Promotion Consortium (MCPC)
      Devices, USB Chargers, and Carkit Chargers
      (Maximum 7 V)
   – Backup Battery Charger
• USB:
   – USB 2.0 OTG-Compliant HS Transceivers
   – 12-Bit ULPI
   – USB Power Supply (5-V CP for VBUS)
   – CEA-2011: OTG Transceiver Interface
      Specification
   – CEA-936A: Mini-USB Analog Carkit Interface
      Specification
   – MCPC ME-Universal Asynchronous
      Receiver/Transmitter (UART) GL-006
      Specification
• Additional Features:
   – LED Driver Circuit for Two External LEDs
   – 10-Bit MADC with 3 to 8 External Inputs
   – RTC and Retention Modules
   – HS Inter-Integrated Circuit (I2C) Serial Control
   – Thermal Shutdown and Hot-Die Detection
   – Keypad Interface (up to 8 × 8)
   – External Vibrator (Vibrator) Control
   – 19 GPIO Devices
   – 0.4-mm Pitch, 209 Pin, 7-mm × 7-mm Package

Applications
• Smart Phones
• Industrial
• Tablets
• Handheld Systems


other parts : TPS65950  TPS65950A2ZXN  TPS65950A2ZXNR  TPS65950A3  TPS65950A3ZXN  TPS65950BZXN  TPS65950BZXNR  TPS65950ZXN  TPS65950A2  
TPS65950A3ZXNR PDF

1

New and Popular Datasheet

LM317  PN2222A  1N4007  LM324N  SFH4250S  FR2A  PWR-TOP200YAI  TOP210PF1  PM75RSK060  PM75RSK060  PM75RSD060  PM75RSA060  AR9280  GI851  GI851  GI824  RTR6280  PI3HDMI412AD  AR9280  QCA4002  P6CU-1212E  GI824  PT2399  AR8031  Z86E06_04  TNY253GN  TM200RZ-2H  RU-050515  PT2314E  PT2253A  PM6610  PE4259  OPF392A  ISL6525CBZ  CM300DY-24NFH  BUK456-200  BUK456-100A  23Z467SM  MSM8974  SB1060  SFH4250S-R2  PFS708EG  1985881  BA4918  LRG6SP  Q65110A2286  PI5L100  MYS380  1N4448  CBD10120LCT  XPS-4102WG  BTRS-5640G  VTB100H  TSP120A  TDA2030A  Part List  Manufacturers List 


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]