datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Number :
Home  >>>  TLK111 Datasheet

TLK111

  

Datasheet PDF

Match, Like TLK111
Start with TLK111P*
End N/A
Included N/A
View Details    
Manufacturer Part no Description View
TI
Texas Instruments
TLK111 PHYTER® Industrial Temperature 10/100Mbs Ethernet Physical Layer Transceiver

Description
The TLK111 is a single-port Ethernet PHY for 10Base-T and 100Base TX signaling. This device integrates all the physical-layer functions needed to transmit and receive data on standard twisted-pair cables.
The TLK111 supports the standard Media Independent Interface (MII) and Reduced Media Independent Interface (RMII) for direct connection to a Media Access Controller (MAC).
The TLK111 is designed for power-supply flexibility, and can operate with a single 3.3V power supply or with combinations of 3.3V and 1.55V power supplies for reduced power operation.
The TLK111 uses mixed-signal processing to perform equalization, data recovery, and error correction to achieve robust operation over CAT 5 twisted-pair wiring. This device not only meets the requirements of IEEE 802.3, but maintains high margins in terms of cross-talk and alien noise.
The TLK111 Ethernet PHY has a special Power Back Off mode to conserve power in systems with relatively short cables. This mode provides the flexibility to reduce system power when the system is not required to drive the standard IEEE 802.3 100m cable length, or the extended 150m, error-free cable reach of the TLK111. For more detail, see application note SLLA328.

Features
• Fully Pin Compatible with the TLK110 Device
• Low Power Consumption:
   – Single Supply: <205mW PHY, 275mW with
      Center Tap (Typical)
   – Dual Supplies: <126mW PHY, 200mW with
      Center Tap (Typical)
• Programmable Power Back Off to reduce PHY
   power up to 20% in systems with shorter cables
• IEEE 1588 SFD indication enables time stamping
   by a controller or processor
• Low deterministic latency supports IEEE1588
   implementation
• Cable Diagnostics
• Programmable Fast Link Down Modes, <10µs
   reaction time
• Variable I/O voltage range: 1.8V to 3.3V
• 3.3-V MAC Interface
• Fixed TX Clock to XI, with programmable phase shift
• Auto-MDIX for 10/100Mbs
• Energy Detection Mode
• 25 MHz Clock Out
• MII and RMII Capabilities
• IEEE 802.3u MII
• IEEE 802.3u Auto-Negotiation and Parallel
   Detection
• Error-Free 100Base-T Operation up to 150 Meters
   Under Typical Conditions
• Error-Free 10Base-T Operation up to 300 Meters
   Under Typical Conditions
• Serial Management Interface
• IEEE 802.3u ENDEC, 10Base-T
   Transceivers and Filters
• IEEE 802.3u PCS, 100Base-TX Transceivers
• IEEE 1149.1 JTAG
• Integrated ANSI X3.263 Compliant TP-PMD
   Physical Sublayer with Adaptive Equalization and
   Baseline Wander Compensation
• Programmable LED Support Link, 10/100Mbs
   Mode, Activity, and Collision Detect
• 10/100Mbs Packet BIST (Built in Self Test)
• HBM ESD protection on RD± and TD± of 16kV
• 48-pin LQFP Package (7mm) × (7mm)

Applications
• Industrial Networks and Factory Automation
• Motor and Motion Control
• General Embedded Applications
• Real Time Industrial Ethernet Applications such as
   EtherCAT®, Ethernet/IP™, ProfiNET® , and
   SERCOSIII


other parts : TLK111PT  TLK111PTR  
TLK111 PDF
TI
Texas Instruments
TLK111PT PHYTER® Industrial Temperature 10/100Mbs Ethernet Physical Layer Transceiver

Description
The TLK111 is a single-port Ethernet PHY for 10Base-T and 100Base TX signaling. This device integrates all the physical-layer functions needed to transmit and receive data on standard twisted-pair cables.
The TLK111 supports the standard Media Independent Interface (MII) and Reduced Media Independent Interface (RMII) for direct connection to a Media Access Controller (MAC).
The TLK111 is designed for power-supply flexibility, and can operate with a single 3.3V power supply or with combinations of 3.3V and 1.55V power supplies for reduced power operation.
The TLK111 uses mixed-signal processing to perform equalization, data recovery, and error correction to achieve robust operation over CAT 5 twisted-pair wiring. This device not only meets the requirements of IEEE 802.3, but maintains high margins in terms of cross-talk and alien noise.
The TLK111 Ethernet PHY has a special Power Back Off mode to conserve power in systems with relatively short cables. This mode provides the flexibility to reduce system power when the system is not required to drive the standard IEEE 802.3 100m cable length, or the extended 150m, error-free cable reach of the TLK111. For more detail, see application note SLLA328.

Features
• Fully Pin Compatible with the TLK110 Device
• Low Power Consumption:
   – Single Supply: <205mW PHY, 275mW with
      Center Tap (Typical)
   – Dual Supplies: <126mW PHY, 200mW with
      Center Tap (Typical)
• Programmable Power Back Off to reduce PHY
   power up to 20% in systems with shorter cables
• IEEE 1588 SFD indication enables time stamping
   by a controller or processor
• Low deterministic latency supports IEEE1588
   implementation
• Cable Diagnostics
• Programmable Fast Link Down Modes, <10µs
   reaction time
• Variable I/O voltage range: 1.8V to 3.3V
• 3.3-V MAC Interface
• Fixed TX Clock to XI, with programmable phase shift
• Auto-MDIX for 10/100Mbs
• Energy Detection Mode
• 25 MHz Clock Out
• MII and RMII Capabilities
• IEEE 802.3u MII
• IEEE 802.3u Auto-Negotiation and Parallel
   Detection
• Error-Free 100Base-T Operation up to 150 Meters
   Under Typical Conditions
• Error-Free 10Base-T Operation up to 300 Meters
   Under Typical Conditions
• Serial Management Interface
• IEEE 802.3u ENDEC, 10Base-T
   Transceivers and Filters
• IEEE 802.3u PCS, 100Base-TX Transceivers
• IEEE 1149.1 JTAG
• Integrated ANSI X3.263 Compliant TP-PMD
   Physical Sublayer with Adaptive Equalization and
   Baseline Wander Compensation
• Programmable LED Support Link, 10/100Mbs
   Mode, Activity, and Collision Detect
• 10/100Mbs Packet BIST (Built in Self Test)
• HBM ESD protection on RD± and TD± of 16kV
• 48-pin LQFP Package (7mm) × (7mm)

Applications
• Industrial Networks and Factory Automation
• Motor and Motion Control
• General Embedded Applications
• Real Time Industrial Ethernet Applications such as
   EtherCAT®, Ethernet/IP™, ProfiNET® , and
   SERCOSIII


other parts : TLK111  TLK111PTR  
TLK111PT PDF
TI
Texas Instruments
TLK111PTR PHYTER® Industrial Temperature 10/100Mbs Ethernet Physical Layer Transceiver

Description
The TLK111 is a single-port Ethernet PHY for 10Base-T and 100Base TX signaling. This device integrates all the physical-layer functions needed to transmit and receive data on standard twisted-pair cables.
The TLK111 supports the standard Media Independent Interface (MII) and Reduced Media Independent Interface (RMII) for direct connection to a Media Access Controller (MAC).
The TLK111 is designed for power-supply flexibility, and can operate with a single 3.3V power supply or with combinations of 3.3V and 1.55V power supplies for reduced power operation.
The TLK111 uses mixed-signal processing to perform equalization, data recovery, and error correction to achieve robust operation over CAT 5 twisted-pair wiring. This device not only meets the requirements of IEEE 802.3, but maintains high margins in terms of cross-talk and alien noise.
The TLK111 Ethernet PHY has a special Power Back Off mode to conserve power in systems with relatively short cables. This mode provides the flexibility to reduce system power when the system is not required to drive the standard IEEE 802.3 100m cable length, or the extended 150m, error-free cable reach of the TLK111. For more detail, see application note SLLA328.

Features
• Fully Pin Compatible with the TLK110 Device
• Low Power Consumption:
   – Single Supply: <205mW PHY, 275mW with
      Center Tap (Typical)
   – Dual Supplies: <126mW PHY, 200mW with
      Center Tap (Typical)
• Programmable Power Back Off to reduce PHY
   power up to 20% in systems with shorter cables
• IEEE 1588 SFD indication enables time stamping
   by a controller or processor
• Low deterministic latency supports IEEE1588
   implementation
• Cable Diagnostics
• Programmable Fast Link Down Modes, <10µs
   reaction time
• Variable I/O voltage range: 1.8V to 3.3V
• 3.3-V MAC Interface
• Fixed TX Clock to XI, with programmable phase shift
• Auto-MDIX for 10/100Mbs
• Energy Detection Mode
• 25 MHz Clock Out
• MII and RMII Capabilities
• IEEE 802.3u MII
• IEEE 802.3u Auto-Negotiation and Parallel
   Detection
• Error-Free 100Base-T Operation up to 150 Meters
   Under Typical Conditions
• Error-Free 10Base-T Operation up to 300 Meters
   Under Typical Conditions
• Serial Management Interface
• IEEE 802.3u ENDEC, 10Base-T
   Transceivers and Filters
• IEEE 802.3u PCS, 100Base-TX Transceivers
• IEEE 1149.1 JTAG
• Integrated ANSI X3.263 Compliant TP-PMD
   Physical Sublayer with Adaptive Equalization and
   Baseline Wander Compensation
• Programmable LED Support Link, 10/100Mbs
   Mode, Activity, and Collision Detect
• 10/100Mbs Packet BIST (Built in Self Test)
• HBM ESD protection on RD± and TD± of 16kV
• 48-pin LQFP Package (7mm) × (7mm)

Applications
• Industrial Networks and Factory Automation
• Motor and Motion Control
• General Embedded Applications
• Real Time Industrial Ethernet Applications such as
   EtherCAT®, Ethernet/IP™, ProfiNET® , and
   SERCOSIII


other parts : TLK111  TLK111PT  
TLK111PTR PDF

1

New and Popular Datasheet

LM317  PN2222A  1N4007  LM324N  SMA1212  74VHCT00AMTR  MC74VHC00  2SK4212A  DTC143E  BUX348  2SB1308-Q  LA76835NM  2SC4162  LA7811  STK4042XI  LA3386-MQ  2SB1216  2SB1216  2SB1216  2SB1216  DTC143EUAT106_12  2SK4212A  RT5047A  2SK436  RFN20TF6S  K4212  BU7411G  UC1846VTD1  UC1846MDWREP  SN54LVC32A  K9F1G08U0B  LTA320AP02  K4B4G1646B  MC74VHC00  LA3386-MQ  IRF320  74VHCT00A  74VHC00  2SC2314  MCT2  UC3846N  UC1846AJ  TPS62003DGS  STK4162II  SSS6N55  SN74LVC32373A  RT8206L  RT8283A  RT8857  RJK0234DNS  MC74VHCT00A  MC74VHCT00A  LV4900HR  KD2003-CG10A  TDA2030A  Part List  Manufacturers List 


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]