datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Number :
Home  >>>  MSP430G2113 Datasheet

MSP430G2113

  

Datasheet PDF

Match, Like MSP430G2113
Start with MSP430G2113I*
End N/A
Included N/A
View Details    
Manufacturer Part no Description View
Texas-Instruments
Texas Instruments
MSP430G2113 MIXED SIGNAL MICROCONTROLLER

DESCRIPTION
The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The MSP430G2x13 and MSP430G2x53 series are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, up to 24 I/O capacitive-touch enabled pins, a versatile analog comparator, and built-in communication capability using the universal serial communication interface. In addition the MSP430G2x53 family members have a 10-bit analog-to-digital (A/D) converter. For configuration details see Table 1.
Typical applications include low-cost sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system.

FEATURES
• Low Supply-Voltage Range: 1.8 V to 3.6 V
• Ultra-Low Power Consumption
   – Active Mode: 230 µA at 1 MHz, 2.2 V
   – Standby Mode: 0.5 µA
   – Off Mode (RAM Retention): 0.1 µA
• Five Power-Saving Modes
• Ultra-Fast Wake-Up From Standby Mode in
   Less Than 1 µs
• 16-Bit RISC Architecture, 62.5-ns Instruction
   Cycle Time
• Basic Clock Module Configurations
   – Internal Frequencies up to 16 MHz With
      Four Calibrated Frequency
   – Internal Very-Low-Power Low-Frequency
      (LF) Oscillator
   – 32-kHz Crystal
   – External Digital Clock Source
• Two 16-Bit Timer_A With Three
   Capture/Compare Registers
• Up to 24 Capacitive-Touch Enabled I/O Pins
• Universal Serial Communication Interface (USCI)
   – Enhanced UART Supporting Auto Baudrate
      Detection (LIN)
   – IrDA Encoder and Decoder
   – Synchronous SPI
   – I2C™
• On-Chip Comparator for Analog Signal
   Compare Function or Slope Analog-to-Digital
   (A/D) Conversion
• 10-Bit 200-ksps Analog-to-Digital (A/D)
   Converter With Internal Reference, Sample-
   and-Hold, and Autoscan (See Table 1)
• Brownout Detector
• Serial Onboard Programming,
   No External Programming Voltage Needed,
   Programmable Code Protection by Security
   Fuse
• On-Chip Emulation Logic With Spy-Bi-Wire
   Interface
• Family Members are Summarized in Table 1
• Package Options
   – TSSOP: 20 Pin, 28 Pin
   – PDIP: 20 Pin
   – QFN: 32 Pin
• For Complete Module Descriptions, See the
   MSP430x2xx Family User’s Guide (SLAU144)


other parts : MSP430G2113IN20  MSP430G2113IRHB32R  MSP430G2153  MSP430G2153IN20  MSP430G2153IPW20  MSP430G2153IPW20R  MSP430G2153IPW28  MSP430G2153IPW28R  MSP430G2153IRHB32  MSP430G2153IRHB32R  
MSP430G2113 PDF
TI
Texas Instruments
MSP430G2113 MIXED SIGNAL MICROCONTROLLER

DESCRIPTION
The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The MSP430G2x13 and MSP430G2x53 series are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, up to 24 I/O touch-sense-enabled pins, a versatile analog comparator, and built-in communication capability using the universal serial communication interface. In addition the MSP430G2x53 family members have a 10-bit analog-to-digital (A/D) converter. For configuration details see Table 1.
Typical applications include low-cost sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system.

FEATURES
• Low Supply-Voltage Range: 1.8 V to 3.6 V
• Ultra-Low Power Consumption
   – Active Mode: 230 µA at 1 MHz, 2.2 V
   – Standby Mode: 0.5 µA
   – Off Mode (RAM Retention): 0.1 µA
• Five Power-Saving Modes
• Ultra-Fast Wake-Up From Standby Mode in
   Less Than 1 µs
• 16-Bit RISC Architecture, 62.5-ns Instruction
   Cycle Time
• Basic Clock Module Configurations
   – Internal Frequencies up to 16 MHz With
      Four Calibrated Frequency
   – Internal Very-Low-Power Low-Frequency
      (LF) Oscillator
   – 32-kHz Crystal
   – External Digital Clock Source
• Two 16-Bit Timer_A With Three
   Capture/Compare Registers
• Up to 24 Touch-Sense-Enabled I/O Pins
• Universal Serial Communication Interface(USCI)
   – Enhanced UART Supporting Auto Baudrate
      Detection (LIN)
   – IrDA Encoder and Decoder
   – Synchronous SPI
   – I2C™
• On-Chip Comparator for Analog Signal
   Compare Function or Slope Analog-to-Digital
   (A/D) Conversion
• 10-Bit 200-ksps Analog-to-Digital (A/D)
   Converter With Internal Reference,
   Sample-and-Hold, and Autoscan (See Table 1)
• Brownout Detector
• Serial Onboard Programming,
   No External Programming Voltage Needed,
   Programmable Code Protection by Security
   Fuse
• On-Chip Emulation Logic With Spy-Bi-Wire
   Interface
• Family Members are Summarized in Table 1
• Package Options
   – TSSOP: 20 Pin, 28 Pin
   – PDIP: 20 Pin
   – QFN: 32 Pin
• For Complete Module Descriptions, See the
   MSP430x2xx Family User’s Guide (SLAU144)



other parts : MSP430G2113IN20  MSP430G2113IPW20  MSP430G2113IPW28  MSP430G2113IRHB32  MSP430G2113IRHB32R  MSP430G2113IRHB32T  MSP430G2153  MSP430G2153IN20  MSP430G2153IPW20  MSP430G2153IPW20R  
MSP430G2113 PDF
Texas-Instruments
Texas Instruments
MSP430G2113IN20 MIXED SIGNAL MICROCONTROLLER

DESCRIPTION
The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The MSP430G2x13 and MSP430G2x53 series are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, up to 24 I/O capacitive-touch enabled pins, a versatile analog comparator, and built-in communication capability using the universal serial communication interface. In addition the MSP430G2x53 family members have a 10-bit analog-to-digital (A/D) converter. For configuration details see Table 1.
Typical applications include low-cost sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system.

FEATURES
• Low Supply-Voltage Range: 1.8 V to 3.6 V
• Ultra-Low Power Consumption
   – Active Mode: 230 µA at 1 MHz, 2.2 V
   – Standby Mode: 0.5 µA
   – Off Mode (RAM Retention): 0.1 µA
• Five Power-Saving Modes
• Ultra-Fast Wake-Up From Standby Mode in
   Less Than 1 µs
• 16-Bit RISC Architecture, 62.5-ns Instruction
   Cycle Time
• Basic Clock Module Configurations
   – Internal Frequencies up to 16 MHz With
      Four Calibrated Frequency
   – Internal Very-Low-Power Low-Frequency
      (LF) Oscillator
   – 32-kHz Crystal
   – External Digital Clock Source
• Two 16-Bit Timer_A With Three
   Capture/Compare Registers
• Up to 24 Capacitive-Touch Enabled I/O Pins
• Universal Serial Communication Interface (USCI)
   – Enhanced UART Supporting Auto Baudrate
      Detection (LIN)
   – IrDA Encoder and Decoder
   – Synchronous SPI
   – I2C™
• On-Chip Comparator for Analog Signal
   Compare Function or Slope Analog-to-Digital
   (A/D) Conversion
• 10-Bit 200-ksps Analog-to-Digital (A/D)
   Converter With Internal Reference, Sample-
   and-Hold, and Autoscan (See Table 1)
• Brownout Detector
• Serial Onboard Programming,
   No External Programming Voltage Needed,
   Programmable Code Protection by Security
   Fuse
• On-Chip Emulation Logic With Spy-Bi-Wire
   Interface
• Family Members are Summarized in Table 1
• Package Options
   – TSSOP: 20 Pin, 28 Pin
   – PDIP: 20 Pin
   – QFN: 32 Pin
• For Complete Module Descriptions, See the
   MSP430x2xx Family User’s Guide (SLAU144)


other parts : MSP430G2113  MSP430G2113IRHB32R  MSP430G2153  MSP430G2153IN20  MSP430G2153IPW20  MSP430G2153IPW20R  MSP430G2153IPW28  MSP430G2153IPW28R  MSP430G2153IRHB32  MSP430G2153IRHB32R  
MSP430G2113IN20 PDF
TI
Texas Instruments
MSP430G2113IN20 MIXED SIGNAL MICROCONTROLLER

DESCRIPTION
The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The MSP430G2x13 and MSP430G2x53 series are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, up to 24 I/O touch-sense-enabled pins, a versatile analog comparator, and built-in communication capability using the universal serial communication interface. In addition the MSP430G2x53 family members have a 10-bit analog-to-digital (A/D) converter. For configuration details see Table 1.
Typical applications include low-cost sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system.

FEATURES
• Low Supply-Voltage Range: 1.8 V to 3.6 V
• Ultra-Low Power Consumption
   – Active Mode: 230 µA at 1 MHz, 2.2 V
   – Standby Mode: 0.5 µA
   – Off Mode (RAM Retention): 0.1 µA
• Five Power-Saving Modes
• Ultra-Fast Wake-Up From Standby Mode in
   Less Than 1 µs
• 16-Bit RISC Architecture, 62.5-ns Instruction
   Cycle Time
• Basic Clock Module Configurations
   – Internal Frequencies up to 16 MHz With
      Four Calibrated Frequency
   – Internal Very-Low-Power Low-Frequency
      (LF) Oscillator
   – 32-kHz Crystal
   – External Digital Clock Source
• Two 16-Bit Timer_A With Three
   Capture/Compare Registers
• Up to 24 Touch-Sense-Enabled I/O Pins
• Universal Serial Communication Interface(USCI)
   – Enhanced UART Supporting Auto Baudrate
      Detection (LIN)
   – IrDA Encoder and Decoder
   – Synchronous SPI
   – I2C™
• On-Chip Comparator for Analog Signal
   Compare Function or Slope Analog-to-Digital
   (A/D) Conversion
• 10-Bit 200-ksps Analog-to-Digital (A/D)
   Converter With Internal Reference,
   Sample-and-Hold, and Autoscan (See Table 1)
• Brownout Detector
• Serial Onboard Programming,
   No External Programming Voltage Needed,
   Programmable Code Protection by Security
   Fuse
• On-Chip Emulation Logic With Spy-Bi-Wire
   Interface
• Family Members are Summarized in Table 1
• Package Options
   – TSSOP: 20 Pin, 28 Pin
   – PDIP: 20 Pin
   – QFN: 32 Pin
• For Complete Module Descriptions, See the
   MSP430x2xx Family User’s Guide (SLAU144)



other parts : MSP430G2113  MSP430G2113IPW20  MSP430G2113IPW28  MSP430G2113IRHB32  MSP430G2113IRHB32R  MSP430G2113IRHB32T  MSP430G2153  MSP430G2153IN20  MSP430G2153IPW20  MSP430G2153IPW20R  
MSP430G2113IN20 PDF
TI
Texas Instruments
MSP430G2113IPW28 MIXED SIGNAL MICROCONTROLLER

DESCRIPTION
The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The MSP430G2x13 and MSP430G2x53 series are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, up to 24 I/O touch-sense-enabled pins, a versatile analog comparator, and built-in communication capability using the universal serial communication interface. In addition the MSP430G2x53 family members have a 10-bit analog-to-digital (A/D) converter. For configuration details see Table 1.
Typical applications include low-cost sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system.

FEATURES
• Low Supply-Voltage Range: 1.8 V to 3.6 V
• Ultra-Low Power Consumption
   – Active Mode: 230 µA at 1 MHz, 2.2 V
   – Standby Mode: 0.5 µA
   – Off Mode (RAM Retention): 0.1 µA
• Five Power-Saving Modes
• Ultra-Fast Wake-Up From Standby Mode in
   Less Than 1 µs
• 16-Bit RISC Architecture, 62.5-ns Instruction
   Cycle Time
• Basic Clock Module Configurations
   – Internal Frequencies up to 16 MHz With
      Four Calibrated Frequency
   – Internal Very-Low-Power Low-Frequency
      (LF) Oscillator
   – 32-kHz Crystal
   – External Digital Clock Source
• Two 16-Bit Timer_A With Three
   Capture/Compare Registers
• Up to 24 Touch-Sense-Enabled I/O Pins
• Universal Serial Communication Interface(USCI)
   – Enhanced UART Supporting Auto Baudrate
      Detection (LIN)
   – IrDA Encoder and Decoder
   – Synchronous SPI
   – I2C™
• On-Chip Comparator for Analog Signal
   Compare Function or Slope Analog-to-Digital
   (A/D) Conversion
• 10-Bit 200-ksps Analog-to-Digital (A/D)
   Converter With Internal Reference,
   Sample-and-Hold, and Autoscan (See Table 1)
• Brownout Detector
• Serial Onboard Programming,
   No External Programming Voltage Needed,
   Programmable Code Protection by Security
   Fuse
• On-Chip Emulation Logic With Spy-Bi-Wire
   Interface
• Family Members are Summarized in Table 1
• Package Options
   – TSSOP: 20 Pin, 28 Pin
   – PDIP: 20 Pin
   – QFN: 32 Pin
• For Complete Module Descriptions, See the
   MSP430x2xx Family User’s Guide (SLAU144)



other parts : MSP430G2113  MSP430G2113IN20  MSP430G2113IPW20  MSP430G2113IRHB32  MSP430G2113IRHB32R  MSP430G2113IRHB32T  MSP430G2153  MSP430G2153IN20  MSP430G2153IPW20  MSP430G2153IPW20R  
MSP430G2113IPW28 PDF
TI
Texas Instruments
MSP430G2113IPW20 MIXED SIGNAL MICROCONTROLLER

DESCRIPTION
The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The MSP430G2x13 and MSP430G2x53 series are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, up to 24 I/O touch-sense-enabled pins, a versatile analog comparator, and built-in communication capability using the universal serial communication interface. In addition the MSP430G2x53 family members have a 10-bit analog-to-digital (A/D) converter. For configuration details see Table 1.
Typical applications include low-cost sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system.

FEATURES
• Low Supply-Voltage Range: 1.8 V to 3.6 V
• Ultra-Low Power Consumption
   – Active Mode: 230 µA at 1 MHz, 2.2 V
   – Standby Mode: 0.5 µA
   – Off Mode (RAM Retention): 0.1 µA
• Five Power-Saving Modes
• Ultra-Fast Wake-Up From Standby Mode in
   Less Than 1 µs
• 16-Bit RISC Architecture, 62.5-ns Instruction
   Cycle Time
• Basic Clock Module Configurations
   – Internal Frequencies up to 16 MHz With
      Four Calibrated Frequency
   – Internal Very-Low-Power Low-Frequency
      (LF) Oscillator
   – 32-kHz Crystal
   – External Digital Clock Source
• Two 16-Bit Timer_A With Three
   Capture/Compare Registers
• Up to 24 Touch-Sense-Enabled I/O Pins
• Universal Serial Communication Interface(USCI)
   – Enhanced UART Supporting Auto Baudrate
      Detection (LIN)
   – IrDA Encoder and Decoder
   – Synchronous SPI
   – I2C™
• On-Chip Comparator for Analog Signal
   Compare Function or Slope Analog-to-Digital
   (A/D) Conversion
• 10-Bit 200-ksps Analog-to-Digital (A/D)
   Converter With Internal Reference,
   Sample-and-Hold, and Autoscan (See Table 1)
• Brownout Detector
• Serial Onboard Programming,
   No External Programming Voltage Needed,
   Programmable Code Protection by Security
   Fuse
• On-Chip Emulation Logic With Spy-Bi-Wire
   Interface
• Family Members are Summarized in Table 1
• Package Options
   – TSSOP: 20 Pin, 28 Pin
   – PDIP: 20 Pin
   – QFN: 32 Pin
• For Complete Module Descriptions, See the
   MSP430x2xx Family User’s Guide (SLAU144)



other parts : MSP430G2113  MSP430G2113IN20  MSP430G2113IPW28  MSP430G2113IRHB32  MSP430G2113IRHB32R  MSP430G2113IRHB32T  MSP430G2153  MSP430G2153IN20  MSP430G2153IPW20  MSP430G2153IPW20R  
MSP430G2113IPW20 PDF
TI
Texas Instruments
MSP430G2113IRHB32 MIXED SIGNAL MICROCONTROLLER

DESCRIPTION
The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The MSP430G2x13 and MSP430G2x53 series are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, up to 24 I/O touch-sense-enabled pins, a versatile analog comparator, and built-in communication capability using the universal serial communication interface. In addition the MSP430G2x53 family members have a 10-bit analog-to-digital (A/D) converter. For configuration details see Table 1.
Typical applications include low-cost sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system.

FEATURES
• Low Supply-Voltage Range: 1.8 V to 3.6 V
• Ultra-Low Power Consumption
   – Active Mode: 230 µA at 1 MHz, 2.2 V
   – Standby Mode: 0.5 µA
   – Off Mode (RAM Retention): 0.1 µA
• Five Power-Saving Modes
• Ultra-Fast Wake-Up From Standby Mode in
   Less Than 1 µs
• 16-Bit RISC Architecture, 62.5-ns Instruction
   Cycle Time
• Basic Clock Module Configurations
   – Internal Frequencies up to 16 MHz With
      Four Calibrated Frequency
   – Internal Very-Low-Power Low-Frequency
      (LF) Oscillator
   – 32-kHz Crystal
   – External Digital Clock Source
• Two 16-Bit Timer_A With Three
   Capture/Compare Registers
• Up to 24 Touch-Sense-Enabled I/O Pins
• Universal Serial Communication Interface(USCI)
   – Enhanced UART Supporting Auto Baudrate
      Detection (LIN)
   – IrDA Encoder and Decoder
   – Synchronous SPI
   – I2C™
• On-Chip Comparator for Analog Signal
   Compare Function or Slope Analog-to-Digital
   (A/D) Conversion
• 10-Bit 200-ksps Analog-to-Digital (A/D)
   Converter With Internal Reference,
   Sample-and-Hold, and Autoscan (See Table 1)
• Brownout Detector
• Serial Onboard Programming,
   No External Programming Voltage Needed,
   Programmable Code Protection by Security
   Fuse
• On-Chip Emulation Logic With Spy-Bi-Wire
   Interface
• Family Members are Summarized in Table 1
• Package Options
   – TSSOP: 20 Pin, 28 Pin
   – PDIP: 20 Pin
   – QFN: 32 Pin
• For Complete Module Descriptions, See the
   MSP430x2xx Family User’s Guide (SLAU144)



other parts : MSP430G2113  MSP430G2113IN20  MSP430G2113IPW20  MSP430G2113IPW28  MSP430G2113IRHB32R  MSP430G2113IRHB32T  MSP430G2153  MSP430G2153IN20  MSP430G2153IPW20  MSP430G2153IPW20R  
MSP430G2113IRHB32 PDF
Texas-Instruments
Texas Instruments
MSP430G2113IRHB32R MIXED SIGNAL MICROCONTROLLER

DESCRIPTION
The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The MSP430G2x13 and MSP430G2x53 series are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, up to 24 I/O capacitive-touch enabled pins, a versatile analog comparator, and built-in communication capability using the universal serial communication interface. In addition the MSP430G2x53 family members have a 10-bit analog-to-digital (A/D) converter. For configuration details see Table 1.
Typical applications include low-cost sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system.

FEATURES
• Low Supply-Voltage Range: 1.8 V to 3.6 V
• Ultra-Low Power Consumption
   – Active Mode: 230 µA at 1 MHz, 2.2 V
   – Standby Mode: 0.5 µA
   – Off Mode (RAM Retention): 0.1 µA
• Five Power-Saving Modes
• Ultra-Fast Wake-Up From Standby Mode in
   Less Than 1 µs
• 16-Bit RISC Architecture, 62.5-ns Instruction
   Cycle Time
• Basic Clock Module Configurations
   – Internal Frequencies up to 16 MHz With
      Four Calibrated Frequency
   – Internal Very-Low-Power Low-Frequency
      (LF) Oscillator
   – 32-kHz Crystal
   – External Digital Clock Source
• Two 16-Bit Timer_A With Three
   Capture/Compare Registers
• Up to 24 Capacitive-Touch Enabled I/O Pins
• Universal Serial Communication Interface (USCI)
   – Enhanced UART Supporting Auto Baudrate
      Detection (LIN)
   – IrDA Encoder and Decoder
   – Synchronous SPI
   – I2C™
• On-Chip Comparator for Analog Signal
   Compare Function or Slope Analog-to-Digital
   (A/D) Conversion
• 10-Bit 200-ksps Analog-to-Digital (A/D)
   Converter With Internal Reference, Sample-
   and-Hold, and Autoscan (See Table 1)
• Brownout Detector
• Serial Onboard Programming,
   No External Programming Voltage Needed,
   Programmable Code Protection by Security
   Fuse
• On-Chip Emulation Logic With Spy-Bi-Wire
   Interface
• Family Members are Summarized in Table 1
• Package Options
   – TSSOP: 20 Pin, 28 Pin
   – PDIP: 20 Pin
   – QFN: 32 Pin
• For Complete Module Descriptions, See the
   MSP430x2xx Family User’s Guide (SLAU144)


other parts : MSP430G2113  MSP430G2113IN20  MSP430G2153  MSP430G2153IN20  MSP430G2153IPW20  MSP430G2153IPW20R  MSP430G2153IPW28  MSP430G2153IPW28R  MSP430G2153IRHB32  MSP430G2153IRHB32R  
MSP430G2113IRHB32R PDF
TI
Texas Instruments
MSP430G2113IRHB32T MIXED SIGNAL MICROCONTROLLER

DESCRIPTION
The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The MSP430G2x13 and MSP430G2x53 series are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, up to 24 I/O touch-sense-enabled pins, a versatile analog comparator, and built-in communication capability using the universal serial communication interface. In addition the MSP430G2x53 family members have a 10-bit analog-to-digital (A/D) converter. For configuration details see Table 1.
Typical applications include low-cost sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system.

FEATURES
• Low Supply-Voltage Range: 1.8 V to 3.6 V
• Ultra-Low Power Consumption
   – Active Mode: 230 µA at 1 MHz, 2.2 V
   – Standby Mode: 0.5 µA
   – Off Mode (RAM Retention): 0.1 µA
• Five Power-Saving Modes
• Ultra-Fast Wake-Up From Standby Mode in
   Less Than 1 µs
• 16-Bit RISC Architecture, 62.5-ns Instruction
   Cycle Time
• Basic Clock Module Configurations
   – Internal Frequencies up to 16 MHz With
      Four Calibrated Frequency
   – Internal Very-Low-Power Low-Frequency
      (LF) Oscillator
   – 32-kHz Crystal
   – External Digital Clock Source
• Two 16-Bit Timer_A With Three
   Capture/Compare Registers
• Up to 24 Touch-Sense-Enabled I/O Pins
• Universal Serial Communication Interface(USCI)
   – Enhanced UART Supporting Auto Baudrate
      Detection (LIN)
   – IrDA Encoder and Decoder
   – Synchronous SPI
   – I2C™
• On-Chip Comparator for Analog Signal
   Compare Function or Slope Analog-to-Digital
   (A/D) Conversion
• 10-Bit 200-ksps Analog-to-Digital (A/D)
   Converter With Internal Reference,
   Sample-and-Hold, and Autoscan (See Table 1)
• Brownout Detector
• Serial Onboard Programming,
   No External Programming Voltage Needed,
   Programmable Code Protection by Security
   Fuse
• On-Chip Emulation Logic With Spy-Bi-Wire
   Interface
• Family Members are Summarized in Table 1
• Package Options
   – TSSOP: 20 Pin, 28 Pin
   – PDIP: 20 Pin
   – QFN: 32 Pin
• For Complete Module Descriptions, See the
   MSP430x2xx Family User’s Guide (SLAU144)



other parts : MSP430G2113  MSP430G2113IN20  MSP430G2113IPW20  MSP430G2113IPW28  MSP430G2113IRHB32  MSP430G2113IRHB32R  MSP430G2153  MSP430G2153IN20  MSP430G2153IPW20  MSP430G2153IPW20R  
MSP430G2113IRHB32T PDF
TI
Texas Instruments
MSP430G2113IRHB32R MIXED SIGNAL MICROCONTROLLER

DESCRIPTION
The Texas Instruments MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.
The MSP430G2x13 and MSP430G2x53 series are ultra-low-power mixed signal microcontrollers with built-in 16-bit timers, up to 24 I/O touch-sense-enabled pins, a versatile analog comparator, and built-in communication capability using the universal serial communication interface. In addition the MSP430G2x53 family members have a 10-bit analog-to-digital (A/D) converter. For configuration details see Table 1.
Typical applications include low-cost sensor systems that capture analog signals, convert them to digital values, and then process the data for display or for transmission to a host system.

FEATURES
• Low Supply-Voltage Range: 1.8 V to 3.6 V
• Ultra-Low Power Consumption
   – Active Mode: 230 µA at 1 MHz, 2.2 V
   – Standby Mode: 0.5 µA
   – Off Mode (RAM Retention): 0.1 µA
• Five Power-Saving Modes
• Ultra-Fast Wake-Up From Standby Mode in
   Less Than 1 µs
• 16-Bit RISC Architecture, 62.5-ns Instruction
   Cycle Time
• Basic Clock Module Configurations
   – Internal Frequencies up to 16 MHz With
      Four Calibrated Frequency
   – Internal Very-Low-Power Low-Frequency
      (LF) Oscillator
   – 32-kHz Crystal
   – External Digital Clock Source
• Two 16-Bit Timer_A With Three
   Capture/Compare Registers
• Up to 24 Touch-Sense-Enabled I/O Pins
• Universal Serial Communication Interface(USCI)
   – Enhanced UART Supporting Auto Baudrate
      Detection (LIN)
   – IrDA Encoder and Decoder
   – Synchronous SPI
   – I2C™
• On-Chip Comparator for Analog Signal
   Compare Function or Slope Analog-to-Digital
   (A/D) Conversion
• 10-Bit 200-ksps Analog-to-Digital (A/D)
   Converter With Internal Reference,
   Sample-and-Hold, and Autoscan (See Table 1)
• Brownout Detector
• Serial Onboard Programming,
   No External Programming Voltage Needed,
   Programmable Code Protection by Security
   Fuse
• On-Chip Emulation Logic With Spy-Bi-Wire
   Interface
• Family Members are Summarized in Table 1
• Package Options
   – TSSOP: 20 Pin, 28 Pin
   – PDIP: 20 Pin
   – QFN: 32 Pin
• For Complete Module Descriptions, See the
   MSP430x2xx Family User’s Guide (SLAU144)



other parts : MSP430G2113  MSP430G2113IN20  MSP430G2113IPW20  MSP430G2113IPW28  MSP430G2113IRHB32  MSP430G2113IRHB32T  MSP430G2153  MSP430G2153IN20  MSP430G2153IPW20  MSP430G2153IPW20R  
MSP430G2113IRHB32R PDF

1

New and Popular Datasheet

LM317  PN2222A  1N4007  LM324N  SY8120  LM7815CK  RTL8111E-VL-CG  RTL8111  RTL8192SE  1N4001  R1200  2SD1101  2SK1588-HF  2SK1588  R2A15212FP  RH5VT30A-RF  DTC144EKA  74ABT373AN,112  ALC892  ALC5633Q  SF31  R1200  R1200  R1200  R1200  R1200  R1200  R1200  R1200  R1200  R1200  R1200  R1200  R1200  R1200  DTC144EKA  BC546  ADM8829ART  R1200  RTL8196C  RN5VT18C  QT1080-ISG  QT100  MH17  DB201S  DB201S  DB201S  DB201S  DB207S  4244  05F5L  05F5  RF3826  RTL8309N  TDA2030A  Part List  Manufacturers List 


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]