datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Number :
Home  >>>  LM5009 Datasheet

LM5009

  

Datasheet PDF

Match, Like LM5009 LM5009A
Start with LM5009A* LM5009M* LM5009S*
End N/A
Included N/A
View Details    
Manufacturer Part no Description View
National-Semiconductor
National ->Texas Instruments
LM5009_2006 150 mA, 100V Step-Down Switching Regulator

General Description
The LM5009 Step Down Switching Regulator features all of the functions needed to implement a low cost, efficient, Buck bias regulator. This device is capable of driving a 150 mA load current from a 9.5V to 95V input source. The switching frequency can exceed 600 kHz, depending on the input and output voltages. The output voltage may be set from 2.5V to 85V. This high voltage regulator contains an N-Channel buck switch and internal startup regulator. The device is easy to implement and is provided in the MSOP-8 and the thermally enhanced LLP-8 packages. The LM5009 is a well suited alternative to a high voltage monolithic or discrete linear solution where the power loss becomes unacceptable. The regulator’s operation is based on a hysteretic control scheme using an ON time inversely proportional to VIN. This feature allows the operating frequency to remain relatively constant over load and input voltage variations. The hysteretic control requires no loop compensation, resulting in an ultra-fast transient response. An intelligent current limit is implemented with forced OFF time, which is inversely proportional to Vout. This scheme ensures short circuit protection while providing minimum foldback. Other features include: Thermal Shutdown, Vcc under-voltage lockout, Gate drive under-voltage lockout, and Maximum Duty Cycle limiter.

Features
■ Integrated N-Channel MOSFET
■ Guaranteed 150 mA output current capability
■ Ultra-Fast Transient Response
■ No loop compensation required
■ Vin feed forward provides constant operating frequency
■ Switching frequency can exceed 600 kHz
■ Highly efficient operation
■ 2% accurate 2.5V feedback from -40°C to 125°C
■ Internal startup regulator
■ Intelligent current limit protection
■ External shutdown control
■ Thermal shutdown
■ MSOP-8 and thermally enhanced LLP packages

Typical Applications
■ Heat sink eliminator for classic linear regulator
   applications
■ 12V, 24V, 36V, and 48V rectified AC systems
■ 42V Automotive
■ Non-isolated AC mains charge coupled supplies
■ LED Current Source


other parts : LM5009MM_2006  LM5009MMX_2006  LM5009SD_2006  LM5009SDX_2006  
LM5009 PDF
National-Semiconductor
National ->Texas Instruments
LM5009 150 mA, 100V Step-Down Switching Regulator

General Description
The LM5009 Step Down Switching Regulator features all of the functions needed to implement a low cost, efficient, Buck bias regulator. This device is capable of driving a 150 mA load current from a 9.5V to 95V input source. The switching frequency can exceed 600 kHz, depending on the input and output voltages. The output voltage may be set from 2.5V to 85V. This high voltage regulator contains an N-Channel buck switch and internal startup regulator. The device is easy to implement and is provided in the MSOP-8 and the thermally enhanced LLP-8 packages. The LM5009 is a well suited alternative to a high voltage monolithic or discrete linear solution where the power loss becomes unacceptable. The regulator’s operation is based on a hysteretic control scheme using an ON time inversely proportional to VIN. This feature allows the operating frequency to remain relatively constant over load and input voltage variations. The hysteretic control requires no loop compensation, resulting in an ultra-fast transient response. An intelligent current limit is implemented with forced OFF time, which is inversely proportional to Vout. This scheme ensures short circuit protection while providing minimum foldback. Other features include: Thermal Shutdown, Vcc under-voltage lockout, Gate drive under-voltage lockout, and Maximum Duty Cycle limiter.

Features
■ Integrated N-Channel MOSFET
■ Guaranteed 150 mA output current capability
■ Ultra-Fast Transient Response
■ No loop compensation required
■ Vin feed forward provides constant operating frequency
■ Switching frequency can exceed 600 kHz
■ Highly efficient operation
■ 2% accurate 2.5V feedback from -40°C to 125°C
■ Internal startup regulator
■ Intelligent current limit protection
■ External shutdown control
■ Thermal shutdown
■ MSOP-8 and thermally enhanced LLP packages

Typical Applications
■ Heat sink eliminator for classic linear regulator
   applications
■ 12V, 24V, 36V, and 48V rectified AC systems
■ 42V Automotive
■ Non-isolated AC mains charge coupled supplies
■ LED Current Source


other parts : LM5009MM  LM5009MMX  LM5009SDC  LM5009SDCX  
LM5009 PDF
TI
Texas Instruments
LM5009 Wide Input, 100-V,150-mA, Step-Down Switching Regulator

Description
The LM5009 step-down switching regulator features all of the functions needed to implement a low-cost, efficient, buck bias regulator. This device is capable of driving a 150-mA load current from a 9.5-V to 95-V input source. The switching frequency can exceed 600 kHz, depending on the input and output voltages. The output voltage can be set from 2.5 V to 85 V. This high-voltage regulator contains an N-channel buck switch and an internal startup regulator. The device is easy to implement and is provided in 8-pin VSSOP and thermally-enhanced, 8-pin WSON packages. The LM5009 is a well-suited alternative to a high-voltage monolithic or discrete linear solution where the power loss becomes unacceptable. The regulator operation is based on a control scheme using an on-time inversely proportional to VIN. This feature allows the operating frequency to remain relatively constant over load and input voltage variations. The control scheme requires no loop compensation, resulting in an ultrafast transient response. An intelligent current limit is implemented with forced off-time that is inversely proportional to VOUT. This scheme ensures short-circuit protection and provides minimum foldback. Other features include thermal shutdown, VCC undervoltage lockout, gate drive undervoltage lockout, and maximum duty cycle limiter.

Features
• Integrated N-Channel MOSFET
• 150-mA Output Current Capability
• Ultra-Fast Transient Response
• No Loop Compensation Required
• VIN Feed-Forward Provides Constant Operating
   Frequency
• Switching Frequency Can Exceed 600 kHz
• Highly Efficient Operation
• 2% Accurate 2.5-V Feedback From
   –40°C to +125°C
• Internal Startup Regulator
• Intelligent Current Limit Protection
• External Shutdown Control
• Thermal Shutdown
• 8-Pin VSSOP and Thermally-Enhanced 8-Pin
   WSON Packages

Applications
• Heat Sink Eliminator for Classic Linear Regulator
   Applications
• 12-V, 24-V, 36-V, and 48-V Rectified AC Systems
• 42-V Automotive
• Non-Isolated AC Mains Charge-Coupled Supplies
• LED Current Source


other parts : LM5009MMX  LM5009MM  LM5009MM/NOPB  LM5009MMX/NOPB  LM5009SDC/NOPB  LM5009SDCX/NOPB  
LM5009 PDF
National-Semiconductor
National ->Texas Instruments
LM5009A 100V, 150 mA Constant On-Time Buck Switching Regulator

General Description
The LM5009A is a functional variant of the LM5009 COT Buck Switching Regulator. The functional differences of the LM5009A are: The minimum input operating voltage is 6 volts, the on-time equation is slightly different, and the requirement for a minimum load current is removed.
The LM5009A Step Down Switching Regulator features all of the functions needed to implement a low cost, efficient, Buck bias regulator. This high voltage regulator contains an 100 V N-Channel Buck Switch. The device is easy to implement and is provided in the MSOP-8 and the thermally enhanced LLP-8 packages. The regulator is based on a control scheme using an ON time inversely proportional to VIN. This feature allows the operating frequency to remain relatively constant. The control scheme requires no loop compensation. An intelligent current limit is implemented with forced OFF time, which is inversely proportional to Vout. This scheme ensures short circuit control while providing minimum foldback. Other fea tures include: Thermal Shutdown, VCC under-voltage lockout, Gate drive under-voltage lockout, Max Duty Cycle limiter, and a pre-charge switch.

Features
■ Operating input voltage range: 6V to 95V
■ Integrated 100V, N-Channel buck switch
■ Internal start-up regulator
■ No loop compensation required
■ Ultra-Fast transient response
■ On time varies inversely with input voltage
■ Operating frequency remains constant with varying line
   voltage and load current
■ Adjustable output voltage from 2.5V
■ Highly efficient operation
■ Precision internal reference
■ Low bias current
■ Intelligent current limit
■ Thermal shutdown

Typical Applications
■ Non-Isolated Telecommunication Buck Regulator
■ Secondary High Voltage Post Regulator
■ +42V Automotive Systems


other parts : LM5009AMM  LM5009AMMX  LM5009ASD  LM5009ASDX  
LM5009A PDF
National-Semiconductor
National ->Texas Instruments
LM5009MM 150 mA, 100V Step-Down Switching Regulator

General Description
The LM5009 Step Down Switching Regulator features all of the functions needed to implement a low cost, efficient, Buck bias regulator. This device is capable of driving a 150 mA load current from a 9.5V to 95V input source. The switching frequency can exceed 600 kHz, depending on the input and output voltages. The output voltage may be set from 2.5V to 85V. This high voltage regulator contains an N-Channel buck switch and internal startup regulator. The device is easy to implement and is provided in the MSOP-8 and the thermally enhanced LLP-8 packages. The LM5009 is a well suited alternative to a high voltage monolithic or discrete linear solution where the power loss becomes unacceptable. The regulator’s operation is based on a hysteretic control scheme using an ON time inversely proportional to VIN. This feature allows the operating frequency to remain relatively constant over load and input voltage variations. The hysteretic control requires no loop compensation, resulting in an ultra-fast transient response. An intelligent current limit is implemented with forced OFF time, which is inversely proportional to Vout. This scheme ensures short circuit protection while providing minimum foldback. Other features include: Thermal Shutdown, Vcc under-voltage lockout, Gate drive under-voltage lockout, and Maximum Duty Cycle limiter.

Features
■ Integrated N-Channel MOSFET
■ Guaranteed 150 mA output current capability
■ Ultra-Fast Transient Response
■ No loop compensation required
■ Vin feed forward provides constant operating frequency
■ Switching frequency can exceed 600 kHz
■ Highly efficient operation
■ 2% accurate 2.5V feedback from -40°C to 125°C
■ Internal startup regulator
■ Intelligent current limit protection
■ External shutdown control
■ Thermal shutdown
■ MSOP-8 and thermally enhanced LLP packages

Typical Applications
■ Heat sink eliminator for classic linear regulator
   applications
■ 12V, 24V, 36V, and 48V rectified AC systems
■ 42V Automotive
■ Non-isolated AC mains charge coupled supplies
■ LED Current Source


other parts : LM5009  LM5009MMX  LM5009SDC  LM5009SDCX  
LM5009MM PDF
TI
Texas Instruments
LM5009MM Wide Input, 100-V,150-mA, Step-Down Switching Regulator

Description
The LM5009 step-down switching regulator features all of the functions needed to implement a low-cost, efficient, buck bias regulator. This device is capable of driving a 150-mA load current from a 9.5-V to 95-V input source. The switching frequency can exceed 600 kHz, depending on the input and output voltages. The output voltage can be set from 2.5 V to 85 V. This high-voltage regulator contains an N-channel buck switch and an internal startup regulator. The device is easy to implement and is provided in 8-pin VSSOP and thermally-enhanced, 8-pin WSON packages. The LM5009 is a well-suited alternative to a high-voltage monolithic or discrete linear solution where the power loss becomes unacceptable. The regulator operation is based on a control scheme using an on-time inversely proportional to VIN. This feature allows the operating frequency to remain relatively constant over load and input voltage variations. The control scheme requires no loop compensation, resulting in an ultrafast transient response. An intelligent current limit is implemented with forced off-time that is inversely proportional to VOUT. This scheme ensures short-circuit protection and provides minimum foldback. Other features include thermal shutdown, VCC undervoltage lockout, gate drive undervoltage lockout, and maximum duty cycle limiter.

Features
• Integrated N-Channel MOSFET
• 150-mA Output Current Capability
• Ultra-Fast Transient Response
• No Loop Compensation Required
• VIN Feed-Forward Provides Constant Operating
   Frequency
• Switching Frequency Can Exceed 600 kHz
• Highly Efficient Operation
• 2% Accurate 2.5-V Feedback From
   –40°C to +125°C
• Internal Startup Regulator
• Intelligent Current Limit Protection
• External Shutdown Control
• Thermal Shutdown
• 8-Pin VSSOP and Thermally-Enhanced 8-Pin
   WSON Packages

Applications
• Heat Sink Eliminator for Classic Linear Regulator
   Applications
• 12-V, 24-V, 36-V, and 48-V Rectified AC Systems
• 42-V Automotive
• Non-Isolated AC Mains Charge-Coupled Supplies
• LED Current Source


other parts : LM5009  LM5009MMX  LM5009MM/NOPB  LM5009MMX/NOPB  LM5009SDC/NOPB  LM5009SDCX/NOPB  
LM5009MM PDF
National-Semiconductor
National ->Texas Instruments
LM5009MM_2006 150 mA, 100V Step-Down Switching Regulator

General Description
The LM5009 Step Down Switching Regulator features all of the functions needed to implement a low cost, efficient, Buck bias regulator. This device is capable of driving a 150 mA load current from a 9.5V to 95V input source. The switching frequency can exceed 600 kHz, depending on the input and output voltages. The output voltage may be set from 2.5V to 85V. This high voltage regulator contains an N-Channel buck switch and internal startup regulator. The device is easy to implement and is provided in the MSOP-8 and the thermally enhanced LLP-8 packages. The LM5009 is a well suited alternative to a high voltage monolithic or discrete linear solution where the power loss becomes unacceptable. The regulator’s operation is based on a hysteretic control scheme using an ON time inversely proportional to VIN. This feature allows the operating frequency to remain relatively constant over load and input voltage variations. The hysteretic control requires no loop compensation, resulting in an ultra-fast transient response. An intelligent current limit is implemented with forced OFF time, which is inversely proportional to Vout. This scheme ensures short circuit protection while providing minimum foldback. Other features include: Thermal Shutdown, Vcc under-voltage lockout, Gate drive under-voltage lockout, and Maximum Duty Cycle limiter.

Features
■ Integrated N-Channel MOSFET
■ Guaranteed 150 mA output current capability
■ Ultra-Fast Transient Response
■ No loop compensation required
■ Vin feed forward provides constant operating frequency
■ Switching frequency can exceed 600 kHz
■ Highly efficient operation
■ 2% accurate 2.5V feedback from -40°C to 125°C
■ Internal startup regulator
■ Intelligent current limit protection
■ External shutdown control
■ Thermal shutdown
■ MSOP-8 and thermally enhanced LLP packages

Typical Applications
■ Heat sink eliminator for classic linear regulator
   applications
■ 12V, 24V, 36V, and 48V rectified AC systems
■ 42V Automotive
■ Non-isolated AC mains charge coupled supplies
■ LED Current Source


other parts : LM5009_2006  LM5009MMX_2006  LM5009SD_2006  LM5009SDX_2006  
LM5009MM PDF
National-Semiconductor
National ->Texas Instruments
LM5009SD_2006 150 mA, 100V Step-Down Switching Regulator

General Description
The LM5009 Step Down Switching Regulator features all of the functions needed to implement a low cost, efficient, Buck bias regulator. This device is capable of driving a 150 mA load current from a 9.5V to 95V input source. The switching frequency can exceed 600 kHz, depending on the input and output voltages. The output voltage may be set from 2.5V to 85V. This high voltage regulator contains an N-Channel buck switch and internal startup regulator. The device is easy to implement and is provided in the MSOP-8 and the thermally enhanced LLP-8 packages. The LM5009 is a well suited alternative to a high voltage monolithic or discrete linear solution where the power loss becomes unacceptable. The regulator’s operation is based on a hysteretic control scheme using an ON time inversely proportional to VIN. This feature allows the operating frequency to remain relatively constant over load and input voltage variations. The hysteretic control requires no loop compensation, resulting in an ultra-fast transient response. An intelligent current limit is implemented with forced OFF time, which is inversely proportional to Vout. This scheme ensures short circuit protection while providing minimum foldback. Other features include: Thermal Shutdown, Vcc under-voltage lockout, Gate drive under-voltage lockout, and Maximum Duty Cycle limiter.

Features
■ Integrated N-Channel MOSFET
■ Guaranteed 150 mA output current capability
■ Ultra-Fast Transient Response
■ No loop compensation required
■ Vin feed forward provides constant operating frequency
■ Switching frequency can exceed 600 kHz
■ Highly efficient operation
■ 2% accurate 2.5V feedback from -40°C to 125°C
■ Internal startup regulator
■ Intelligent current limit protection
■ External shutdown control
■ Thermal shutdown
■ MSOP-8 and thermally enhanced LLP packages

Typical Applications
■ Heat sink eliminator for classic linear regulator
   applications
■ 12V, 24V, 36V, and 48V rectified AC systems
■ 42V Automotive
■ Non-isolated AC mains charge coupled supplies
■ LED Current Source


other parts : LM5009_2006  LM5009MM_2006  LM5009MMX_2006  LM5009SDX_2006  
LM5009SD PDF
National-Semiconductor
National ->Texas Instruments
LM5009ASD 100V, 150 mA Constant On-Time Buck Switching Regulator

General Description
The LM5009A is a functional variant of the LM5009 COT Buck Switching Regulator. The functional differences of the LM5009A are: The minimum input operating voltage is 6 volts, the on-time equation is slightly different, and the requirement for a minimum load current is removed.
The LM5009A Step Down Switching Regulator features all of the functions needed to implement a low cost, efficient, Buck bias regulator. This high voltage regulator contains an 100 V N-Channel Buck Switch. The device is easy to implement and is provided in the MSOP-8 and the thermally enhanced LLP-8 packages. The regulator is based on a control scheme using an ON time inversely proportional to VIN. This feature allows the operating frequency to remain relatively constant. The control scheme requires no loop compensation. An intelligent current limit is implemented with forced OFF time, which is inversely proportional to Vout. This scheme ensures short circuit control while providing minimum foldback. Other fea tures include: Thermal Shutdown, VCC under-voltage lockout, Gate drive under-voltage lockout, Max Duty Cycle limiter, and a pre-charge switch.

Features
■ Operating input voltage range: 6V to 95V
■ Integrated 100V, N-Channel buck switch
■ Internal start-up regulator
■ No loop compensation required
■ Ultra-Fast transient response
■ On time varies inversely with input voltage
■ Operating frequency remains constant with varying line
   voltage and load current
■ Adjustable output voltage from 2.5V
■ Highly efficient operation
■ Precision internal reference
■ Low bias current
■ Intelligent current limit
■ Thermal shutdown

Typical Applications
■ Non-Isolated Telecommunication Buck Regulator
■ Secondary High Voltage Post Regulator
■ +42V Automotive Systems


other parts : LM5009A  LM5009AMM  LM5009AMMX  LM5009ASDX  
LM5009ASD PDF
National-Semiconductor
National ->Texas Instruments
LM5009AMM 100V, 150 mA Constant On-Time Buck Switching Regulator

General Description
The LM5009A is a functional variant of the LM5009 COT Buck Switching Regulator. The functional differences of the LM5009A are: The minimum input operating voltage is 6 volts, the on-time equation is slightly different, and the requirement for a minimum load current is removed.
The LM5009A Step Down Switching Regulator features all of the functions needed to implement a low cost, efficient, Buck bias regulator. This high voltage regulator contains an 100 V N-Channel Buck Switch. The device is easy to implement and is provided in the MSOP-8 and the thermally enhanced LLP-8 packages. The regulator is based on a control scheme using an ON time inversely proportional to VIN. This feature allows the operating frequency to remain relatively constant. The control scheme requires no loop compensation. An intelligent current limit is implemented with forced OFF time, which is inversely proportional to Vout. This scheme ensures short circuit control while providing minimum foldback. Other fea tures include: Thermal Shutdown, VCC under-voltage lockout, Gate drive under-voltage lockout, Max Duty Cycle limiter, and a pre-charge switch.

Features
■ Operating input voltage range: 6V to 95V
■ Integrated 100V, N-Channel buck switch
■ Internal start-up regulator
■ No loop compensation required
■ Ultra-Fast transient response
■ On time varies inversely with input voltage
■ Operating frequency remains constant with varying line
   voltage and load current
■ Adjustable output voltage from 2.5V
■ Highly efficient operation
■ Precision internal reference
■ Low bias current
■ Intelligent current limit
■ Thermal shutdown

Typical Applications
■ Non-Isolated Telecommunication Buck Regulator
■ Secondary High Voltage Post Regulator
■ +42V Automotive Systems


other parts : LM5009A  LM5009AMMX  LM5009ASD  LM5009ASDX  
LM5009AMM PDF
National-Semiconductor
National ->Texas Instruments
LM5009SDC 150 mA, 100V Step-Down Switching Regulator

General Description
The LM5009 Step Down Switching Regulator features all of the functions needed to implement a low cost, efficient, Buck bias regulator. This device is capable of driving a 150 mA load current from a 9.5V to 95V input source. The switching frequency can exceed 600 kHz, depending on the input and output voltages. The output voltage may be set from 2.5V to 85V. This high voltage regulator contains an N-Channel buck switch and internal startup regulator. The device is easy to implement and is provided in the MSOP-8 and the thermally enhanced LLP-8 packages. The LM5009 is a well suited alternative to a high voltage monolithic or discrete linear solution where the power loss becomes unacceptable. The regulator’s operation is based on a hysteretic control scheme using an ON time inversely proportional to VIN. This feature allows the operating frequency to remain relatively constant over load and input voltage variations. The hysteretic control requires no loop compensation, resulting in an ultra-fast transient response. An intelligent current limit is implemented with forced OFF time, which is inversely proportional to Vout. This scheme ensures short circuit protection while providing minimum foldback. Other features include: Thermal Shutdown, Vcc under-voltage lockout, Gate drive under-voltage lockout, and Maximum Duty Cycle limiter.

Features
■ Integrated N-Channel MOSFET
■ Guaranteed 150 mA output current capability
■ Ultra-Fast Transient Response
■ No loop compensation required
■ Vin feed forward provides constant operating frequency
■ Switching frequency can exceed 600 kHz
■ Highly efficient operation
■ 2% accurate 2.5V feedback from -40°C to 125°C
■ Internal startup regulator
■ Intelligent current limit protection
■ External shutdown control
■ Thermal shutdown
■ MSOP-8 and thermally enhanced LLP packages

Typical Applications
■ Heat sink eliminator for classic linear regulator
   applications
■ 12V, 24V, 36V, and 48V rectified AC systems
■ 42V Automotive
■ Non-isolated AC mains charge coupled supplies
■ LED Current Source


other parts : LM5009  LM5009MM  LM5009MMX  LM5009SDCX  
LM5009SDC PDF
National-Semiconductor
National ->Texas Instruments
LM5009MMX_2006 150 mA, 100V Step-Down Switching Regulator

General Description
The LM5009 Step Down Switching Regulator features all of the functions needed to implement a low cost, efficient, Buck bias regulator. This device is capable of driving a 150 mA load current from a 9.5V to 95V input source. The switching frequency can exceed 600 kHz, depending on the input and output voltages. The output voltage may be set from 2.5V to 85V. This high voltage regulator contains an N-Channel buck switch and internal startup regulator. The device is easy to implement and is provided in the MSOP-8 and the thermally enhanced LLP-8 packages. The LM5009 is a well suited alternative to a high voltage monolithic or discrete linear solution where the power loss becomes unacceptable. The regulator’s operation is based on a hysteretic control scheme using an ON time inversely proportional to VIN. This feature allows the operating frequency to remain relatively constant over load and input voltage variations. The hysteretic control requires no loop compensation, resulting in an ultra-fast transient response. An intelligent current limit is implemented with forced OFF time, which is inversely proportional to Vout. This scheme ensures short circuit protection while providing minimum foldback. Other features include: Thermal Shutdown, Vcc under-voltage lockout, Gate drive under-voltage lockout, and Maximum Duty Cycle limiter.

Features
■ Integrated N-Channel MOSFET
■ Guaranteed 150 mA output current capability
■ Ultra-Fast Transient Response
■ No loop compensation required
■ Vin feed forward provides constant operating frequency
■ Switching frequency can exceed 600 kHz
■ Highly efficient operation
■ 2% accurate 2.5V feedback from -40°C to 125°C
■ Internal startup regulator
■ Intelligent current limit protection
■ External shutdown control
■ Thermal shutdown
■ MSOP-8 and thermally enhanced LLP packages

Typical Applications
■ Heat sink eliminator for classic linear regulator
   applications
■ 12V, 24V, 36V, and 48V rectified AC systems
■ 42V Automotive
■ Non-isolated AC mains charge coupled supplies
■ LED Current Source


other parts : LM5009_2006  LM5009MM_2006  LM5009SD_2006  LM5009SDX_2006  
LM5009MMX PDF

1

2

New and Popular Datasheet

LM317  PN2222A  1N4007  LM324N  S7010  MB39A108_03  FT5753M  BSS110  2SK2019-01  2SK1279  2SK1277  2SK2050  2SK1507  2SK1507-01M  ESAD83-004  7MBR15SA120D-01  2MBI100NB-120  MMA8451Q  MMZ09312BT1  MPXV7002  MMA7260Q  33975_05  33975_08  ZVNL120A  2SD1351  65239-005LF_  XR21V1412  7MBR35SB120-01  SK3699-01MR  GL852G  ESAD83-004K  D83-004  IRF510S  2SD1351  AD7892ANZ-1  7MBR10VKA060-50  XR21V1412IL-0B-EB  NA12W-K  BSS110  ZVNL120A  MPC18730EP  M57184N-715B  M57184N-715B  IRF510  GZF10C  GZF10C  ESAD83-004R  CA4800C  7MBP150RA060  0204-125  RY5W-K  PDMB400B12C  MTP4N10  MPXV5100GP  TDA2030A  Part List  Manufacturers List 


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]