datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Number :
Home  >>>  DAC104S085 Datasheet

DAC104S085

  

Datasheet PDF

Match, Like DAC104S085
Start with DAC104S085-* DAC104S085C* DAC104S085E* DAC104S085Q*
End N/A
Included N/A
View Details    
Manufacturer Part no Description View
National-Semiconductor
National ->Texas Instruments
DAC104S085 10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

General Description
The DAC104S085 is a full-featured, general purpose QUAD 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V supply and uses 350 µA at 3V and 500 µA at 5V. The DAC104S085 is packaged in a 10-lead MSOP package. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25 MHz clock rates at supply voltages in the 2.7V to 3.6V range. The serial interface is compatible with standard SPI™, QSPI, MICROWIRE and DSP interfaces.
The reference for the DAC104S085 serves all four channels and can vary in voltage between 1V and VA, providing the widest possible output dynamic range. The DAC104S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the powerdown condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.
A power-on reset circuit ensures that the DAC output powers up to zero volts and remains there until there is a valid write to the device. A power-down feature reduces power consumption to less than a microWatt with three different termination options.
The low power consumption and small packages of the DAC104S085 make it an excellent choice for use in battery operated equipment.
The DAC104S085 is one of a family of pin compatible DACs, including the 8-bit DAC084S085 and the 12-bit DAC124S085. The DAC104S085 operates over the extended industrial temperature range of −40˚C to +105˚C.

Features
■ Guaranteed Monotonicity
■ Low Power Operation
■ Rail-to-Rail Voltage Output
■ Power-on Reset to 0V
■ Simultaneous Output Updating
■ Wide power supply range (+2.7V to +5.5V)
■ Power Down Modes

Applications
■ Battery-Powered Instruments
■ Digital Gain and Offset Adjustment
■ Programmable Voltage & Current Sources
■ Programmable Attenuators


other parts : DAC104S085CIMM  DAC104S085CIMMX  DAC104S085EVAL  
DAC104S085 PDF
TI
Texas Instruments
DAC104S085 10-Bit Micro Power QUAD Digital-to-Analog Converter With Rail-to-Rail Output

Description
The DAC104S085 device is a full-featured, general purpose QUAD 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 1.1 mW at 3 V and 2.5 mW at 5 V. The DAC104S085 is packaged in 10-pin SON and VSSOP packages. The 10-pin SON package makes the DAC104S085 the smallest QUAD DAC in its class. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.
The reference for the DAC104S085 serves all four channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC104S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.

Features
• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
   – Device Temperature Grade 1: –40°C to 125°C
      Ambient Operating Temperature
• Ensured Monotonicity
• Low Power Operation
• Rail-to-Rail Voltage Output
• Power-On Reset to 0 V
• Simultaneous Output Updating
• Wide Power Supply Range (2.7 V to 5.5 V)
• Key Specifications
   – Resolution: 10 bits
   – INL: ±2 LSB (Maximum)
   – DNL: +0.35 / −0.25 LSB (Maximum)
   – Settling Time: 6 μs (Maximum)
   – Zero Code Error: 15 mV (Maximum)
   – Full-Scale Error: −0.75% FS (Maximum)
   – Typical Supply Power
   – Normal Mode: 1.1 mW (3 V), 2.5 mW (5 V)
   – Power Down: 0.3 μW (3 V), 0.8 μW (5 V)

Applications
• Battery-Powered Instruments
• Digital Gain and Offset Adjustment
• Programmable Voltage and Current Sources
• Programmable Attenuators
• Automotives


other parts : DAC104S085-Q1  DAC104S085CIMM  DAC104S085CIMM/NOPB  DAC104S085CIMMX  DAC104S085CIMMX/NOPB  DAC104S085CISD  DAC104S085CISD/NOPB  DAC104S085CISDX  DAC104S085CISDX/NOPB  DAC104S085QIMM  
DAC104S085 PDF
TI
Texas Instruments
DAC104S085-Q1 10-Bit Micro Power QUAD Digital-to-Analog Converter With Rail-to-Rail Output

Description
The DAC104S085 device is a full-featured, general purpose QUAD 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 1.1 mW at 3 V and 2.5 mW at 5 V. The DAC104S085 is packaged in 10-pin SON and VSSOP packages. The 10-pin SON package makes the DAC104S085 the smallest QUAD DAC in its class. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.
The reference for the DAC104S085 serves all four channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC104S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.

Features
• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
   – Device Temperature Grade 1: –40°C to 125°C
      Ambient Operating Temperature
• Ensured Monotonicity
• Low Power Operation
• Rail-to-Rail Voltage Output
• Power-On Reset to 0 V
• Simultaneous Output Updating
• Wide Power Supply Range (2.7 V to 5.5 V)
• Key Specifications
   – Resolution: 10 bits
   – INL: ±2 LSB (Maximum)
   – DNL: +0.35 / −0.25 LSB (Maximum)
   – Settling Time: 6 μs (Maximum)
   – Zero Code Error: 15 mV (Maximum)
   – Full-Scale Error: −0.75% FS (Maximum)
   – Typical Supply Power
   – Normal Mode: 1.1 mW (3 V), 2.5 mW (5 V)
   – Power Down: 0.3 μW (3 V), 0.8 μW (5 V)

Applications
• Battery-Powered Instruments
• Digital Gain and Offset Adjustment
• Programmable Voltage and Current Sources
• Programmable Attenuators
• Automotives


other parts : DAC104S085  DAC104S085CIMM  DAC104S085CIMM/NOPB  DAC104S085CIMMX  DAC104S085CIMMX/NOPB  DAC104S085CISD  DAC104S085CISD/NOPB  DAC104S085CISDX  DAC104S085CISDX/NOPB  DAC104S085QIMM  
DAC104S085-Q1 PDF
National-Semiconductor
National ->Texas Instruments
DAC104S085EVAL 10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

General Description
The DAC104S085 is a full-featured, general purpose QUAD 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V supply and uses 350 µA at 3V and 500 µA at 5V. The DAC104S085 is packaged in a 10-lead MSOP package. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25 MHz clock rates at supply voltages in the 2.7V to 3.6V range. The serial interface is compatible with standard SPI™, QSPI, MICROWIRE and DSP interfaces.
The reference for the DAC104S085 serves all four channels and can vary in voltage between 1V and VA, providing the widest possible output dynamic range. The DAC104S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the powerdown condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.
A power-on reset circuit ensures that the DAC output powers up to zero volts and remains there until there is a valid write to the device. A power-down feature reduces power consumption to less than a microWatt with three different termination options.
The low power consumption and small packages of the DAC104S085 make it an excellent choice for use in battery operated equipment.
The DAC104S085 is one of a family of pin compatible DACs, including the 8-bit DAC084S085 and the 12-bit DAC124S085. The DAC104S085 operates over the extended industrial temperature range of −40˚C to +105˚C.

Features
■ Guaranteed Monotonicity
■ Low Power Operation
■ Rail-to-Rail Voltage Output
■ Power-on Reset to 0V
■ Simultaneous Output Updating
■ Wide power supply range (+2.7V to +5.5V)
■ Power Down Modes

Applications
■ Battery-Powered Instruments
■ Digital Gain and Offset Adjustment
■ Programmable Voltage & Current Sources
■ Programmable Attenuators


other parts : DAC104S085  DAC104S085CIMM  DAC104S085CIMMX  
DAC104S085EVAL PDF
National-Semiconductor
National ->Texas Instruments
DAC104S085CIMM 10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

General Description
The DAC104S085 is a full-featured, general purpose QUAD 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V supply and uses 350 µA at 3V and 500 µA at 5V. The DAC104S085 is packaged in a 10-lead MSOP package. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25 MHz clock rates at supply voltages in the 2.7V to 3.6V range. The serial interface is compatible with standard SPI™, QSPI, MICROWIRE and DSP interfaces.
The reference for the DAC104S085 serves all four channels and can vary in voltage between 1V and VA, providing the widest possible output dynamic range. The DAC104S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the powerdown condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.
A power-on reset circuit ensures that the DAC output powers up to zero volts and remains there until there is a valid write to the device. A power-down feature reduces power consumption to less than a microWatt with three different termination options.
The low power consumption and small packages of the DAC104S085 make it an excellent choice for use in battery operated equipment.
The DAC104S085 is one of a family of pin compatible DACs, including the 8-bit DAC084S085 and the 12-bit DAC124S085. The DAC104S085 operates over the extended industrial temperature range of −40˚C to +105˚C.

Features
■ Guaranteed Monotonicity
■ Low Power Operation
■ Rail-to-Rail Voltage Output
■ Power-on Reset to 0V
■ Simultaneous Output Updating
■ Wide power supply range (+2.7V to +5.5V)
■ Power Down Modes

Applications
■ Battery-Powered Instruments
■ Digital Gain and Offset Adjustment
■ Programmable Voltage & Current Sources
■ Programmable Attenuators


other parts : DAC104S085  DAC104S085CIMMX  DAC104S085EVAL  
DAC104S085CIMM PDF
TI
Texas Instruments
DAC104S085CISD 10-Bit Micro Power QUAD Digital-to-Analog Converter With Rail-to-Rail Output

Description
The DAC104S085 device is a full-featured, general purpose QUAD 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 1.1 mW at 3 V and 2.5 mW at 5 V. The DAC104S085 is packaged in 10-pin SON and VSSOP packages. The 10-pin SON package makes the DAC104S085 the smallest QUAD DAC in its class. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.
The reference for the DAC104S085 serves all four channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC104S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.

Features
• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
   – Device Temperature Grade 1: –40°C to 125°C
      Ambient Operating Temperature
• Ensured Monotonicity
• Low Power Operation
• Rail-to-Rail Voltage Output
• Power-On Reset to 0 V
• Simultaneous Output Updating
• Wide Power Supply Range (2.7 V to 5.5 V)
• Key Specifications
   – Resolution: 10 bits
   – INL: ±2 LSB (Maximum)
   – DNL: +0.35 / −0.25 LSB (Maximum)
   – Settling Time: 6 μs (Maximum)
   – Zero Code Error: 15 mV (Maximum)
   – Full-Scale Error: −0.75% FS (Maximum)
   – Typical Supply Power
   – Normal Mode: 1.1 mW (3 V), 2.5 mW (5 V)
   – Power Down: 0.3 μW (3 V), 0.8 μW (5 V)

Applications
• Battery-Powered Instruments
• Digital Gain and Offset Adjustment
• Programmable Voltage and Current Sources
• Programmable Attenuators
• Automotives


other parts : DAC104S085  DAC104S085-Q1  DAC104S085CIMM  DAC104S085CIMM/NOPB  DAC104S085CIMMX  DAC104S085CIMMX/NOPB  DAC104S085CISD/NOPB  DAC104S085CISDX  DAC104S085CISDX/NOPB  DAC104S085QIMM  
DAC104S085CISD PDF
TI
Texas Instruments
DAC104S085QIMM 10-Bit Micro Power QUAD Digital-to-Analog Converter With Rail-to-Rail Output

Description
The DAC104S085 device is a full-featured, general purpose QUAD 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 1.1 mW at 3 V and 2.5 mW at 5 V. The DAC104S085 is packaged in 10-pin SON and VSSOP packages. The 10-pin SON package makes the DAC104S085 the smallest QUAD DAC in its class. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.
The reference for the DAC104S085 serves all four channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC104S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.

Features
• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
   – Device Temperature Grade 1: –40°C to 125°C
      Ambient Operating Temperature
• Ensured Monotonicity
• Low Power Operation
• Rail-to-Rail Voltage Output
• Power-On Reset to 0 V
• Simultaneous Output Updating
• Wide Power Supply Range (2.7 V to 5.5 V)
• Key Specifications
   – Resolution: 10 bits
   – INL: ±2 LSB (Maximum)
   – DNL: +0.35 / −0.25 LSB (Maximum)
   – Settling Time: 6 μs (Maximum)
   – Zero Code Error: 15 mV (Maximum)
   – Full-Scale Error: −0.75% FS (Maximum)
   – Typical Supply Power
   – Normal Mode: 1.1 mW (3 V), 2.5 mW (5 V)
   – Power Down: 0.3 μW (3 V), 0.8 μW (5 V)

Applications
• Battery-Powered Instruments
• Digital Gain and Offset Adjustment
• Programmable Voltage and Current Sources
• Programmable Attenuators
• Automotives


other parts : DAC104S085  DAC104S085-Q1  DAC104S085CIMM  DAC104S085CIMM/NOPB  DAC104S085CIMMX  DAC104S085CIMMX/NOPB  DAC104S085CISD  DAC104S085CISD/NOPB  DAC104S085CISDX  DAC104S085CISDX/NOPB  
DAC104S085QIMM PDF
TI
Texas Instruments
DAC104S085CIMM 10-Bit Micro Power QUAD Digital-to-Analog Converter With Rail-to-Rail Output

Description
The DAC104S085 device is a full-featured, general purpose QUAD 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 1.1 mW at 3 V and 2.5 mW at 5 V. The DAC104S085 is packaged in 10-pin SON and VSSOP packages. The 10-pin SON package makes the DAC104S085 the smallest QUAD DAC in its class. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.
The reference for the DAC104S085 serves all four channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC104S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.

Features
• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
   – Device Temperature Grade 1: –40°C to 125°C
      Ambient Operating Temperature
• Ensured Monotonicity
• Low Power Operation
• Rail-to-Rail Voltage Output
• Power-On Reset to 0 V
• Simultaneous Output Updating
• Wide Power Supply Range (2.7 V to 5.5 V)
• Key Specifications
   – Resolution: 10 bits
   – INL: ±2 LSB (Maximum)
   – DNL: +0.35 / −0.25 LSB (Maximum)
   – Settling Time: 6 μs (Maximum)
   – Zero Code Error: 15 mV (Maximum)
   – Full-Scale Error: −0.75% FS (Maximum)
   – Typical Supply Power
   – Normal Mode: 1.1 mW (3 V), 2.5 mW (5 V)
   – Power Down: 0.3 μW (3 V), 0.8 μW (5 V)

Applications
• Battery-Powered Instruments
• Digital Gain and Offset Adjustment
• Programmable Voltage and Current Sources
• Programmable Attenuators
• Automotives


other parts : DAC104S085  DAC104S085-Q1  DAC104S085CIMM/NOPB  DAC104S085CIMMX  DAC104S085CIMMX/NOPB  DAC104S085CISD  DAC104S085CISD/NOPB  DAC104S085CISDX  DAC104S085CISDX/NOPB  DAC104S085QIMM  
DAC104S085CIMM PDF
National-Semiconductor
National ->Texas Instruments
DAC104S085CIMMX 10-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

General Description
The DAC104S085 is a full-featured, general purpose QUAD 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V supply and uses 350 µA at 3V and 500 µA at 5V. The DAC104S085 is packaged in a 10-lead MSOP package. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25 MHz clock rates at supply voltages in the 2.7V to 3.6V range. The serial interface is compatible with standard SPI™, QSPI, MICROWIRE and DSP interfaces.
The reference for the DAC104S085 serves all four channels and can vary in voltage between 1V and VA, providing the widest possible output dynamic range. The DAC104S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the powerdown condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.
A power-on reset circuit ensures that the DAC output powers up to zero volts and remains there until there is a valid write to the device. A power-down feature reduces power consumption to less than a microWatt with three different termination options.
The low power consumption and small packages of the DAC104S085 make it an excellent choice for use in battery operated equipment.
The DAC104S085 is one of a family of pin compatible DACs, including the 8-bit DAC084S085 and the 12-bit DAC124S085. The DAC104S085 operates over the extended industrial temperature range of −40˚C to +105˚C.

Features
■ Guaranteed Monotonicity
■ Low Power Operation
■ Rail-to-Rail Voltage Output
■ Power-on Reset to 0V
■ Simultaneous Output Updating
■ Wide power supply range (+2.7V to +5.5V)
■ Power Down Modes

Applications
■ Battery-Powered Instruments
■ Digital Gain and Offset Adjustment
■ Programmable Voltage & Current Sources
■ Programmable Attenuators


other parts : DAC104S085  DAC104S085CIMM  DAC104S085EVAL  
DAC104S085CIMMX PDF
TI
Texas Instruments
DAC104S085QIMMX 10-Bit Micro Power QUAD Digital-to-Analog Converter With Rail-to-Rail Output

Description
The DAC104S085 device is a full-featured, general purpose QUAD 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 1.1 mW at 3 V and 2.5 mW at 5 V. The DAC104S085 is packaged in 10-pin SON and VSSOP packages. The 10-pin SON package makes the DAC104S085 the smallest QUAD DAC in its class. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.
The reference for the DAC104S085 serves all four channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC104S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.

Features
• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
   – Device Temperature Grade 1: –40°C to 125°C
      Ambient Operating Temperature
• Ensured Monotonicity
• Low Power Operation
• Rail-to-Rail Voltage Output
• Power-On Reset to 0 V
• Simultaneous Output Updating
• Wide Power Supply Range (2.7 V to 5.5 V)
• Key Specifications
   – Resolution: 10 bits
   – INL: ±2 LSB (Maximum)
   – DNL: +0.35 / −0.25 LSB (Maximum)
   – Settling Time: 6 μs (Maximum)
   – Zero Code Error: 15 mV (Maximum)
   – Full-Scale Error: −0.75% FS (Maximum)
   – Typical Supply Power
   – Normal Mode: 1.1 mW (3 V), 2.5 mW (5 V)
   – Power Down: 0.3 μW (3 V), 0.8 μW (5 V)

Applications
• Battery-Powered Instruments
• Digital Gain and Offset Adjustment
• Programmable Voltage and Current Sources
• Programmable Attenuators
• Automotives


other parts : DAC104S085  DAC104S085-Q1  DAC104S085CIMM  DAC104S085CIMM/NOPB  DAC104S085CIMMX  DAC104S085CIMMX/NOPB  DAC104S085CISD  DAC104S085CISD/NOPB  DAC104S085CISDX  DAC104S085CISDX/NOPB  
DAC104S085QIMMX PDF
TI
Texas Instruments
DAC104S085CIMMX 10-Bit Micro Power QUAD Digital-to-Analog Converter With Rail-to-Rail Output

Description
The DAC104S085 device is a full-featured, general purpose QUAD 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 1.1 mW at 3 V and 2.5 mW at 5 V. The DAC104S085 is packaged in 10-pin SON and VSSOP packages. The 10-pin SON package makes the DAC104S085 the smallest QUAD DAC in its class. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.
The reference for the DAC104S085 serves all four channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC104S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.

Features
• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
   – Device Temperature Grade 1: –40°C to 125°C
      Ambient Operating Temperature
• Ensured Monotonicity
• Low Power Operation
• Rail-to-Rail Voltage Output
• Power-On Reset to 0 V
• Simultaneous Output Updating
• Wide Power Supply Range (2.7 V to 5.5 V)
• Key Specifications
   – Resolution: 10 bits
   – INL: ±2 LSB (Maximum)
   – DNL: +0.35 / −0.25 LSB (Maximum)
   – Settling Time: 6 μs (Maximum)
   – Zero Code Error: 15 mV (Maximum)
   – Full-Scale Error: −0.75% FS (Maximum)
   – Typical Supply Power
   – Normal Mode: 1.1 mW (3 V), 2.5 mW (5 V)
   – Power Down: 0.3 μW (3 V), 0.8 μW (5 V)

Applications
• Battery-Powered Instruments
• Digital Gain and Offset Adjustment
• Programmable Voltage and Current Sources
• Programmable Attenuators
• Automotives


other parts : DAC104S085  DAC104S085-Q1  DAC104S085CIMM  DAC104S085CIMM/NOPB  DAC104S085CIMMX/NOPB  DAC104S085CISD  DAC104S085CISD/NOPB  DAC104S085CISDX  DAC104S085CISDX/NOPB  DAC104S085QIMM  
DAC104S085CIMMX PDF
TI
Texas Instruments
DAC104S085CISDX 10-Bit Micro Power QUAD Digital-to-Analog Converter With Rail-to-Rail Output

Description
The DAC104S085 device is a full-featured, general purpose QUAD 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 1.1 mW at 3 V and 2.5 mW at 5 V. The DAC104S085 is packaged in 10-pin SON and VSSOP packages. The 10-pin SON package makes the DAC104S085 the smallest QUAD DAC in its class. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.
The reference for the DAC104S085 serves all four channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC104S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.

Features
• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
   – Device Temperature Grade 1: –40°C to 125°C
      Ambient Operating Temperature
• Ensured Monotonicity
• Low Power Operation
• Rail-to-Rail Voltage Output
• Power-On Reset to 0 V
• Simultaneous Output Updating
• Wide Power Supply Range (2.7 V to 5.5 V)
• Key Specifications
   – Resolution: 10 bits
   – INL: ±2 LSB (Maximum)
   – DNL: +0.35 / −0.25 LSB (Maximum)
   – Settling Time: 6 μs (Maximum)
   – Zero Code Error: 15 mV (Maximum)
   – Full-Scale Error: −0.75% FS (Maximum)
   – Typical Supply Power
   – Normal Mode: 1.1 mW (3 V), 2.5 mW (5 V)
   – Power Down: 0.3 μW (3 V), 0.8 μW (5 V)

Applications
• Battery-Powered Instruments
• Digital Gain and Offset Adjustment
• Programmable Voltage and Current Sources
• Programmable Attenuators
• Automotives


other parts : DAC104S085  DAC104S085-Q1  DAC104S085CIMM  DAC104S085CIMM/NOPB  DAC104S085CIMMX  DAC104S085CIMMX/NOPB  DAC104S085CISD  DAC104S085CISD/NOPB  DAC104S085CISDX/NOPB  DAC104S085QIMM  
DAC104S085CISDX PDF

1

2

New and Popular Datasheet

LM317  PN2222A  1N4007  LM324N  RTL8111E-VL-CG  RTL8111  RTL8192SE  1N4001  R1200  2SD1101  2SK1588-HF  2SK1588  R2A15212FP  RH5VT30A-RF  DTC144EKA  74ABT373AN,112  ALC892  ALC5633Q  SF31  R1200  R1200  R1200  R1200  R1200  R1200  R1200  R1200  R1200  R1200  R1200  R1200  R1200  R1200  DTC144EKA  BC546  ADM8829ART  R1200  RTL8196C  RN5VT18C  QT1080-ISG  QT100  MH17  DB201S  DB201S  DB201S  DB201S  DB207S  4244  05F5L  05F5  RF3826  RTL8309N  ALC5616  1N4728B  TDA2030A  Part List  Manufacturers List 


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]