datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Number :
Home  >>>  DAC084S085 Datasheet

DAC084S085

  

Datasheet PDF

Match, Like DAC084S085
Start with DAC084S085C* DAC084S085E*
End N/A
Included N/A
View Details    
Manufacturer Part no Description View
National-Semiconductor
National ->Texas Instruments
DAC084S085 8-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

General Description
The DAC084S085 is a full-featured, general purpose QUAD 8-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V supply and uses 370 µA at 3V and 500 µA at 5V. The DAC084S085 is packaged in a 10-lead MSOP package. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25 MHz clock rates at supply voltages in the 2.7V to 3.6V range. The serial interface is compatible with standard SPI™, QSPI, MICROWIRE and DSP interfaces.
The reference for the DAC084S085 serves all four channels and can vary in voltage between 1V and VA, providing the widest possible output dynamic range. The DAC084S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the powerdown condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.
A power-on reset circuit ensures that the DAC output powers up to zero volts and remains there until there is a valid write to the device. A power-down feature reduces power consumption to less than a microWatt with three different termination options. The low power consumption and small packages of the DAC084S085 make it an excellent choice for use in battery operated equipment.
The DAC084S085 is one of a family of pin compatible DACs, including the 10-bit DAC104S085 and the 12-bit DAC124S085. The DAC084S085 operates over the extended industrial temperature range of −40˚C to +105˚C.

Features
■ Guaranteed Monotonicity
■ Low Power Operation
■ Rail-to-Rail Voltage Output
■ Power-on Reset to 0V
■ Simultaneous Output Updating
■ Wide power supply range (+2.7V to +5.5V)
■ Power Down Modes

Applications
■ Battery-Powered Instruments
■ Digital Gain and Offset Adjustment
■ Programmable Voltage & Current Sources
■ Programmable Attenuators


other parts : DAC084S085CIMM  DAC084S085CIMMX  DAC084S085EVAL  
DAC084S085 PDF
TI
Texas Instruments
DAC084S085 8-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

Description
The DAC084S085 is a full-featured, general-purpose QUAD 8-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 1.1 mW at 3 V and 2.5 mW at 5 V. The DAC084S085 is packaged in 10-pin SON and VSSOP packages. The 10-pin SON package makes the DAC084S085 the smallest QUAD DAC in its class. The on-chip output amplifier allows rail-to rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.
The reference for the DAC084S085 serves all four channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC084S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.

Features
• Ensured Monotonicity
• Low-Power Operation
• Rail-to-Rail Voltage Output
• Power-On Reset to 0 V
• Simultaneous Output Updating
• Wide Power Supply Range (2.7 V to 5.5 V)
• Industrys Smallest Package
• Power Down Modes
• Key Specifications
   – Resolution: 8 Bits
   – INL: ±0.5 LSB (Maximum)
   – DNL: +0.18 / −0.13 LSB (Maximum)
   – Setting Time: 4.5 µs (Maximum)
   – Zero Code Error: +15 mV (Maximum)
   – Full-Scale Error: −0.75 %FS (Maximum)
   – Supply Power:
   – Normal: 1.1 mW (3 V) / 2.5 mW (5 V)
      Typical
   – Power Down: 0.3 µW (3 V) / 0.8 µW (5 V)
      Typical

Applications
• Battery-Powered Instruments
• Digital Gain and Offset Adjustment
• Programmable Voltage and Current Sources
• Programmable Attenuators


other parts : DAC084S085CIMMX/NOPB  DAC084S085CISD/NOPB  DAC084S085CISDX/NOPB  DAC084S085CIMM  DAC084S085CIMM/NOPB  DAC084S085CIMMX  DAC084S085CISD  DAC084S085CISDX  
DAC084S085 PDF
National-Semiconductor
National ->Texas Instruments
DAC084S085EVAL 8-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

General Description
The DAC084S085 is a full-featured, general purpose QUAD 8-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V supply and uses 370 µA at 3V and 500 µA at 5V. The DAC084S085 is packaged in a 10-lead MSOP package. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25 MHz clock rates at supply voltages in the 2.7V to 3.6V range. The serial interface is compatible with standard SPI™, QSPI, MICROWIRE and DSP interfaces.
The reference for the DAC084S085 serves all four channels and can vary in voltage between 1V and VA, providing the widest possible output dynamic range. The DAC084S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the powerdown condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.
A power-on reset circuit ensures that the DAC output powers up to zero volts and remains there until there is a valid write to the device. A power-down feature reduces power consumption to less than a microWatt with three different termination options. The low power consumption and small packages of the DAC084S085 make it an excellent choice for use in battery operated equipment.
The DAC084S085 is one of a family of pin compatible DACs, including the 10-bit DAC104S085 and the 12-bit DAC124S085. The DAC084S085 operates over the extended industrial temperature range of −40˚C to +105˚C.

Features
■ Guaranteed Monotonicity
■ Low Power Operation
■ Rail-to-Rail Voltage Output
■ Power-on Reset to 0V
■ Simultaneous Output Updating
■ Wide power supply range (+2.7V to +5.5V)
■ Power Down Modes

Applications
■ Battery-Powered Instruments
■ Digital Gain and Offset Adjustment
■ Programmable Voltage & Current Sources
■ Programmable Attenuators


other parts : DAC084S085  DAC084S085CIMM  DAC084S085CIMMX  
DAC084S085EVAL PDF
National-Semiconductor
National ->Texas Instruments
DAC084S085CIMM 8-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

General Description
The DAC084S085 is a full-featured, general purpose QUAD 8-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V supply and uses 370 µA at 3V and 500 µA at 5V. The DAC084S085 is packaged in a 10-lead MSOP package. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25 MHz clock rates at supply voltages in the 2.7V to 3.6V range. The serial interface is compatible with standard SPI™, QSPI, MICROWIRE and DSP interfaces.
The reference for the DAC084S085 serves all four channels and can vary in voltage between 1V and VA, providing the widest possible output dynamic range. The DAC084S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the powerdown condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.
A power-on reset circuit ensures that the DAC output powers up to zero volts and remains there until there is a valid write to the device. A power-down feature reduces power consumption to less than a microWatt with three different termination options. The low power consumption and small packages of the DAC084S085 make it an excellent choice for use in battery operated equipment.
The DAC084S085 is one of a family of pin compatible DACs, including the 10-bit DAC104S085 and the 12-bit DAC124S085. The DAC084S085 operates over the extended industrial temperature range of −40˚C to +105˚C.

Features
■ Guaranteed Monotonicity
■ Low Power Operation
■ Rail-to-Rail Voltage Output
■ Power-on Reset to 0V
■ Simultaneous Output Updating
■ Wide power supply range (+2.7V to +5.5V)
■ Power Down Modes

Applications
■ Battery-Powered Instruments
■ Digital Gain and Offset Adjustment
■ Programmable Voltage & Current Sources
■ Programmable Attenuators


other parts : DAC084S085  DAC084S085CIMMX  DAC084S085EVAL  
DAC084S085CIMM PDF
TI
Texas Instruments
DAC084S085CIMM 8-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

Description
The DAC084S085 is a full-featured, general-purpose QUAD 8-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 1.1 mW at 3 V and 2.5 mW at 5 V. The DAC084S085 is packaged in 10-pin SON and VSSOP packages. The 10-pin SON package makes the DAC084S085 the smallest QUAD DAC in its class. The on-chip output amplifier allows rail-to rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.
The reference for the DAC084S085 serves all four channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC084S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.

Features
• Ensured Monotonicity
• Low-Power Operation
• Rail-to-Rail Voltage Output
• Power-On Reset to 0 V
• Simultaneous Output Updating
• Wide Power Supply Range (2.7 V to 5.5 V)
• Industrys Smallest Package
• Power Down Modes
• Key Specifications
   – Resolution: 8 Bits
   – INL: ±0.5 LSB (Maximum)
   – DNL: +0.18 / −0.13 LSB (Maximum)
   – Setting Time: 4.5 µs (Maximum)
   – Zero Code Error: +15 mV (Maximum)
   – Full-Scale Error: −0.75 %FS (Maximum)
   – Supply Power:
   – Normal: 1.1 mW (3 V) / 2.5 mW (5 V)
      Typical
   – Power Down: 0.3 µW (3 V) / 0.8 µW (5 V)
      Typical

Applications
• Battery-Powered Instruments
• Digital Gain and Offset Adjustment
• Programmable Voltage and Current Sources
• Programmable Attenuators


other parts : DAC084S085  DAC084S085CIMMX/NOPB  DAC084S085CISD/NOPB  DAC084S085CISDX/NOPB  DAC084S085CIMM/NOPB  DAC084S085CIMMX  DAC084S085CISD  DAC084S085CISDX  
DAC084S085CIMM PDF
TI
Texas Instruments
DAC084S085CISD 8-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

Description
The DAC084S085 is a full-featured, general-purpose QUAD 8-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 1.1 mW at 3 V and 2.5 mW at 5 V. The DAC084S085 is packaged in 10-pin SON and VSSOP packages. The 10-pin SON package makes the DAC084S085 the smallest QUAD DAC in its class. The on-chip output amplifier allows rail-to rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.
The reference for the DAC084S085 serves all four channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC084S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.

Features
• Ensured Monotonicity
• Low-Power Operation
• Rail-to-Rail Voltage Output
• Power-On Reset to 0 V
• Simultaneous Output Updating
• Wide Power Supply Range (2.7 V to 5.5 V)
• Industrys Smallest Package
• Power Down Modes
• Key Specifications
   – Resolution: 8 Bits
   – INL: ±0.5 LSB (Maximum)
   – DNL: +0.18 / −0.13 LSB (Maximum)
   – Setting Time: 4.5 µs (Maximum)
   – Zero Code Error: +15 mV (Maximum)
   – Full-Scale Error: −0.75 %FS (Maximum)
   – Supply Power:
   – Normal: 1.1 mW (3 V) / 2.5 mW (5 V)
      Typical
   – Power Down: 0.3 µW (3 V) / 0.8 µW (5 V)
      Typical

Applications
• Battery-Powered Instruments
• Digital Gain and Offset Adjustment
• Programmable Voltage and Current Sources
• Programmable Attenuators


other parts : DAC084S085  DAC084S085CIMMX/NOPB  DAC084S085CISD/NOPB  DAC084S085CISDX/NOPB  DAC084S085CIMM  DAC084S085CIMM/NOPB  DAC084S085CIMMX  DAC084S085CISDX  
DAC084S085CISD PDF
National-Semiconductor
National ->Texas Instruments
DAC084S085CIMMX 8-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

General Description
The DAC084S085 is a full-featured, general purpose QUAD 8-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7V to 5.5V supply and uses 370 µA at 3V and 500 µA at 5V. The DAC084S085 is packaged in a 10-lead MSOP package. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25 MHz clock rates at supply voltages in the 2.7V to 3.6V range. The serial interface is compatible with standard SPI™, QSPI, MICROWIRE and DSP interfaces.
The reference for the DAC084S085 serves all four channels and can vary in voltage between 1V and VA, providing the widest possible output dynamic range. The DAC084S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the powerdown condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.
A power-on reset circuit ensures that the DAC output powers up to zero volts and remains there until there is a valid write to the device. A power-down feature reduces power consumption to less than a microWatt with three different termination options. The low power consumption and small packages of the DAC084S085 make it an excellent choice for use in battery operated equipment.
The DAC084S085 is one of a family of pin compatible DACs, including the 10-bit DAC104S085 and the 12-bit DAC124S085. The DAC084S085 operates over the extended industrial temperature range of −40˚C to +105˚C.

Features
■ Guaranteed Monotonicity
■ Low Power Operation
■ Rail-to-Rail Voltage Output
■ Power-on Reset to 0V
■ Simultaneous Output Updating
■ Wide power supply range (+2.7V to +5.5V)
■ Power Down Modes

Applications
■ Battery-Powered Instruments
■ Digital Gain and Offset Adjustment
■ Programmable Voltage & Current Sources
■ Programmable Attenuators


other parts : DAC084S085  DAC084S085CIMM  DAC084S085EVAL  
DAC084S085CIMMX PDF
TI
Texas Instruments
DAC084S085CIMMX 8-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

Description
The DAC084S085 is a full-featured, general-purpose QUAD 8-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 1.1 mW at 3 V and 2.5 mW at 5 V. The DAC084S085 is packaged in 10-pin SON and VSSOP packages. The 10-pin SON package makes the DAC084S085 the smallest QUAD DAC in its class. The on-chip output amplifier allows rail-to rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.
The reference for the DAC084S085 serves all four channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC084S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.

Features
• Ensured Monotonicity
• Low-Power Operation
• Rail-to-Rail Voltage Output
• Power-On Reset to 0 V
• Simultaneous Output Updating
• Wide Power Supply Range (2.7 V to 5.5 V)
• Industrys Smallest Package
• Power Down Modes
• Key Specifications
   – Resolution: 8 Bits
   – INL: ±0.5 LSB (Maximum)
   – DNL: +0.18 / −0.13 LSB (Maximum)
   – Setting Time: 4.5 µs (Maximum)
   – Zero Code Error: +15 mV (Maximum)
   – Full-Scale Error: −0.75 %FS (Maximum)
   – Supply Power:
   – Normal: 1.1 mW (3 V) / 2.5 mW (5 V)
      Typical
   – Power Down: 0.3 µW (3 V) / 0.8 µW (5 V)
      Typical

Applications
• Battery-Powered Instruments
• Digital Gain and Offset Adjustment
• Programmable Voltage and Current Sources
• Programmable Attenuators


other parts : DAC084S085  DAC084S085CIMMX/NOPB  DAC084S085CISD/NOPB  DAC084S085CISDX/NOPB  DAC084S085CIMM  DAC084S085CIMM/NOPB  DAC084S085CISD  DAC084S085CISDX  
DAC084S085CIMMX PDF
TI
Texas Instruments
DAC084S085CISDX 8-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

Description
The DAC084S085 is a full-featured, general-purpose QUAD 8-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 1.1 mW at 3 V and 2.5 mW at 5 V. The DAC084S085 is packaged in 10-pin SON and VSSOP packages. The 10-pin SON package makes the DAC084S085 the smallest QUAD DAC in its class. The on-chip output amplifier allows rail-to rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.
The reference for the DAC084S085 serves all four channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC084S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.

Features
• Ensured Monotonicity
• Low-Power Operation
• Rail-to-Rail Voltage Output
• Power-On Reset to 0 V
• Simultaneous Output Updating
• Wide Power Supply Range (2.7 V to 5.5 V)
• Industrys Smallest Package
• Power Down Modes
• Key Specifications
   – Resolution: 8 Bits
   – INL: ±0.5 LSB (Maximum)
   – DNL: +0.18 / −0.13 LSB (Maximum)
   – Setting Time: 4.5 µs (Maximum)
   – Zero Code Error: +15 mV (Maximum)
   – Full-Scale Error: −0.75 %FS (Maximum)
   – Supply Power:
   – Normal: 1.1 mW (3 V) / 2.5 mW (5 V)
      Typical
   – Power Down: 0.3 µW (3 V) / 0.8 µW (5 V)
      Typical

Applications
• Battery-Powered Instruments
• Digital Gain and Offset Adjustment
• Programmable Voltage and Current Sources
• Programmable Attenuators


other parts : DAC084S085  DAC084S085CIMMX/NOPB  DAC084S085CISD/NOPB  DAC084S085CISDX/NOPB  DAC084S085CIMM  DAC084S085CIMM/NOPB  DAC084S085CIMMX  DAC084S085CISD  
DAC084S085CISDX PDF
TI
Texas Instruments
DAC084S085CISD/NOPB 8-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

Description
The DAC084S085 is a full-featured, general-purpose QUAD 8-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 1.1 mW at 3 V and 2.5 mW at 5 V. The DAC084S085 is packaged in 10-pin SON and VSSOP packages. The 10-pin SON package makes the DAC084S085 the smallest QUAD DAC in its class. The on-chip output amplifier allows rail-to rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.
The reference for the DAC084S085 serves all four channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC084S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.

Features
• Ensured Monotonicity
• Low-Power Operation
• Rail-to-Rail Voltage Output
• Power-On Reset to 0 V
• Simultaneous Output Updating
• Wide Power Supply Range (2.7 V to 5.5 V)
• Industrys Smallest Package
• Power Down Modes
• Key Specifications
   – Resolution: 8 Bits
   – INL: ±0.5 LSB (Maximum)
   – DNL: +0.18 / −0.13 LSB (Maximum)
   – Setting Time: 4.5 µs (Maximum)
   – Zero Code Error: +15 mV (Maximum)
   – Full-Scale Error: −0.75 %FS (Maximum)
   – Supply Power:
   – Normal: 1.1 mW (3 V) / 2.5 mW (5 V)
      Typical
   – Power Down: 0.3 µW (3 V) / 0.8 µW (5 V)
      Typical

Applications
• Battery-Powered Instruments
• Digital Gain and Offset Adjustment
• Programmable Voltage and Current Sources
• Programmable Attenuators


other parts : DAC084S085  DAC084S085CIMMX/NOPB  DAC084S085CISDX/NOPB  DAC084S085CIMM  DAC084S085CIMM/NOPB  DAC084S085CIMMX  DAC084S085CISD  DAC084S085CISDX  
DAC084S085CISD/NOPB PDF
TI
Texas Instruments
DAC084S085CIMM/NOPB 8-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

Description
The DAC084S085 is a full-featured, general-purpose QUAD 8-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 1.1 mW at 3 V and 2.5 mW at 5 V. The DAC084S085 is packaged in 10-pin SON and VSSOP packages. The 10-pin SON package makes the DAC084S085 the smallest QUAD DAC in its class. The on-chip output amplifier allows rail-to rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.
The reference for the DAC084S085 serves all four channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC084S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.

Features
• Ensured Monotonicity
• Low-Power Operation
• Rail-to-Rail Voltage Output
• Power-On Reset to 0 V
• Simultaneous Output Updating
• Wide Power Supply Range (2.7 V to 5.5 V)
• Industrys Smallest Package
• Power Down Modes
• Key Specifications
   – Resolution: 8 Bits
   – INL: ±0.5 LSB (Maximum)
   – DNL: +0.18 / −0.13 LSB (Maximum)
   – Setting Time: 4.5 µs (Maximum)
   – Zero Code Error: +15 mV (Maximum)
   – Full-Scale Error: −0.75 %FS (Maximum)
   – Supply Power:
   – Normal: 1.1 mW (3 V) / 2.5 mW (5 V)
      Typical
   – Power Down: 0.3 µW (3 V) / 0.8 µW (5 V)
      Typical

Applications
• Battery-Powered Instruments
• Digital Gain and Offset Adjustment
• Programmable Voltage and Current Sources
• Programmable Attenuators


other parts : DAC084S085  DAC084S085CIMMX/NOPB  DAC084S085CISD/NOPB  DAC084S085CISDX/NOPB  DAC084S085CIMM  DAC084S085CIMMX  DAC084S085CISD  DAC084S085CISDX  
DAC084S085CIMM/NOPB PDF
TI
Texas Instruments
DAC084S085CISDX/NOPB 8-Bit Micro Power QUAD Digital-to-Analog Converter with Rail-to-Rail Output

Description
The DAC084S085 is a full-featured, general-purpose QUAD 8-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 1.1 mW at 3 V and 2.5 mW at 5 V. The DAC084S085 is packaged in 10-pin SON and VSSOP packages. The 10-pin SON package makes the DAC084S085 the smallest QUAD DAC in its class. The on-chip output amplifier allows rail-to rail output swing and the three wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.
The reference for the DAC084S085 serves all four channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC084S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.

Features
• Ensured Monotonicity
• Low-Power Operation
• Rail-to-Rail Voltage Output
• Power-On Reset to 0 V
• Simultaneous Output Updating
• Wide Power Supply Range (2.7 V to 5.5 V)
• Industrys Smallest Package
• Power Down Modes
• Key Specifications
   – Resolution: 8 Bits
   – INL: ±0.5 LSB (Maximum)
   – DNL: +0.18 / −0.13 LSB (Maximum)
   – Setting Time: 4.5 µs (Maximum)
   – Zero Code Error: +15 mV (Maximum)
   – Full-Scale Error: −0.75 %FS (Maximum)
   – Supply Power:
   – Normal: 1.1 mW (3 V) / 2.5 mW (5 V)
      Typical
   – Power Down: 0.3 µW (3 V) / 0.8 µW (5 V)
      Typical

Applications
• Battery-Powered Instruments
• Digital Gain and Offset Adjustment
• Programmable Voltage and Current Sources
• Programmable Attenuators


other parts : DAC084S085  DAC084S085CIMMX/NOPB  DAC084S085CISD/NOPB  DAC084S085CIMM  DAC084S085CIMM/NOPB  DAC084S085CIMMX  DAC084S085CISD  DAC084S085CISDX  
DAC084S085CISDX/NOPB PDF

1

2

New and Popular Datasheet

LM317  PN2222A  1N4007  LM324N  AFBR-5803ATZ  HDSP-F151  HDSP-3350  HCF4555B_01  G121SN01V2  G121SN01  APE1117A_09  APE1117A  APE1117_09  APE1117  AP2301GN  AP2301GN-HF_14  AP2301GN  AP2301N-HF  SSM60T03J  60T03GH-HF  APL5523_09  APL5536  MBR2060CT  APM2054NVC-TR  APM2054NUC-TR  APM2054NDC-TR  ACMD-7411  SSL4120T/1,518  60T03GH  60T03GH  4N35  G121SN01V3  G121SN01V4  SMA1212  NM27C256  MRF175GV  MRF175GV  LS10R2  LS10K1-T  ILP03N60  HDSP-3358  HCPL-4506  HCF4555  APW7142  APM2054N  AP2301GN-HF  ADSP-2186MBST-266  AD7324  ACPL-C79A-000E  ACPL-C78A  HDSP-F201  APE1117-HF-3  M170EU01-V0  VDD181SCTA  TDA2030A  Part List  Manufacturers List 


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]