datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Number :
Home  >>>  AM1802 Datasheet

AM1802

  

Datasheet PDF

Match, Like AM1802
Start with AM1802B* AM1802E* AM1802Z*
End N/A
Included N/A
View Details    
Manufacturer Part no Description View
TI
Texas Instruments
AM1802 AM1802 ARM® Microprocessor

Description
The AM1802 ARM microprocessor is a low-power applications processor based on ARM926EJ-S.
The device enables original-equipment manufacturers (OEMs) and original-design manufacturers (ODMs) to quickly bring to market devices featuring robust operating systems support, rich user interfaces, and high processing performance life through the maximum flexibility of a fully integrated mixed processor solution.
The ARM926EJ-S is a 32-bit RISC processor core that performs 32-bit or 16-bit instructions and processes 32-bit, 16-bit, or 8-bit data. The core uses pipelining so that all parts of the processor and memory system can operate continuously.
The ARM core has a coprocessor 15 (CP15), protection module, and data and program memory management units (MMUs) with table look-aside buffers. The ARM core processor has separate 16-KB instruction and 16-KB data caches. Both are four-way associative with virtual index virtual tag (VIVT). The ARM core also has 8KB of RAM (Vector Table) and 64KB of ROM.
The EMAC provides an efficient interface between the device and a network. The EMAC supports both 10Base-T and 100Base-TX, or 10 Mbps and 100 Mbps in either half- or full-duplex mode. Additionally, an MDIO interface is available for PHY configuration. The EMAC supports both MII and RMII interfaces.
The rich peripheral set provides the ability to control external peripheral devices and communicate with external processors. For details on each of the peripherals, see the related sections in this document and the associated peripheral reference guides.
The device has a complete set of development tools for the ARM processor. These tools include C compilers, and scheduling, and a Windows® debugger interface for visibility into source code execution.

Features
• 300-MHz ARM926EJ-S™ RISC MPU
• ARM926EJ-S Core
   – 32-Bit and 16-Bit ( Thumb®) Instructions
   – Single-Cycle MAC
   – ARM Jazelle® Technology
   – Embedded ICE-RT™ for Real-Time Debug
• ARM9™ Memory Architecture
   – 16KB of Instruction Cache
   – 16KB of Data Cache
   – 8KB of RAM (Vector Table)
   – 64KB of ROM
• Enhanced Direct Memory Access Controller 3
   (EDMA3):
   – 2 Channel Controllers
   – 3 Transfer Controllers
   – 64 Independent DMA Channels
   – 16 Quick DMA Channels
   – Programmable Transfer Burst Size
• 128KB of On-Chip Memory
• 1.8-V or 3.3-V LVCMOS I/Os (Except for USB and
   DDR2 Interfaces)
• Two External Memory Interfaces:
   – EMIFA
      • NOR (8- or 16-Bit-Wide Data)
      • NAND (8- or 16-Bit-Wide Data)
      • 16-Bit SDRAM with 128-MB Address Space
   – DDR2/Mobile DDR Memory Controller with one
      of the following:
      • 16-Bit DDR2 SDRAM with 256-MB Address
         Space
      • 16-Bit mDDR SDRAM with 256-MB Address
         Space
• Three Configurable 16550-Type UART Modules:
   – With Modem Control Signals
   – 16-Byte FIFO
   – 16x or 13x Oversampling Option(Continue ...)

Applications
• Medical, Healthcare, and Fitness
• ePOS
• Building Automation


other parts : AM1802BZCED3  AM1802BZWTD3  AM1802EZCED3  AM1802EZWTD3  AM1802ZWT  AM1802ZCE  
AM1802 PDF
TI
Texas Instruments
AM1802ZCE AM1802 ARM® Microprocessor

Description
The AM1802 ARM microprocessor is a low-power applications processor based on ARM926EJ-S.
The device enables original-equipment manufacturers (OEMs) and original-design manufacturers (ODMs) to quickly bring to market devices featuring robust operating systems support, rich user interfaces, and high processing performance life through the maximum flexibility of a fully integrated mixed processor solution.
The ARM926EJ-S is a 32-bit RISC processor core that performs 32-bit or 16-bit instructions and processes 32-bit, 16-bit, or 8-bit data. The core uses pipelining so that all parts of the processor and memory system can operate continuously.
The ARM core has a coprocessor 15 (CP15), protection module, and data and program memory management units (MMUs) with table look-aside buffers. The ARM core processor has separate 16-KB instruction and 16-KB data caches. Both are four-way associative with virtual index virtual tag (VIVT). The ARM core also has 8KB of RAM (Vector Table) and 64KB of ROM.
The EMAC provides an efficient interface between the device and a network. The EMAC supports both 10Base-T and 100Base-TX, or 10 Mbps and 100 Mbps in either half- or full-duplex mode. Additionally, an MDIO interface is available for PHY configuration. The EMAC supports both MII and RMII interfaces.
The rich peripheral set provides the ability to control external peripheral devices and communicate with external processors. For details on each of the peripherals, see the related sections in this document and the associated peripheral reference guides.
The device has a complete set of development tools for the ARM processor. These tools include C compilers, and scheduling, and a Windows® debugger interface for visibility into source code execution.

Features
• 300-MHz ARM926EJ-S™ RISC MPU
• ARM926EJ-S Core
   – 32-Bit and 16-Bit ( Thumb®) Instructions
   – Single-Cycle MAC
   – ARM Jazelle® Technology
   – Embedded ICE-RT™ for Real-Time Debug
• ARM9™ Memory Architecture
   – 16KB of Instruction Cache
   – 16KB of Data Cache
   – 8KB of RAM (Vector Table)
   – 64KB of ROM
• Enhanced Direct Memory Access Controller 3
   (EDMA3):
   – 2 Channel Controllers
   – 3 Transfer Controllers
   – 64 Independent DMA Channels
   – 16 Quick DMA Channels
   – Programmable Transfer Burst Size
• 128KB of On-Chip Memory
• 1.8-V or 3.3-V LVCMOS I/Os (Except for USB and
   DDR2 Interfaces)
• Two External Memory Interfaces:
   – EMIFA
      • NOR (8- or 16-Bit-Wide Data)
      • NAND (8- or 16-Bit-Wide Data)
      • 16-Bit SDRAM with 128-MB Address Space
   – DDR2/Mobile DDR Memory Controller with one
      of the following:
      • 16-Bit DDR2 SDRAM with 256-MB Address
         Space
      • 16-Bit mDDR SDRAM with 256-MB Address
         Space
• Three Configurable 16550-Type UART Modules:
   – With Modem Control Signals
   – 16-Byte FIFO
   – 16x or 13x Oversampling Option(Continue ...)

Applications
• Medical, Healthcare, and Fitness
• ePOS
• Building Automation


other parts : AM1802  AM1802BZCED3  AM1802BZWTD3  AM1802EZCED3  AM1802EZWTD3  AM1802ZWT  
AM1802ZCE PDF
TI
Texas Instruments
AM1802ZWT AM1802 ARM® Microprocessor

Description
The AM1802 ARM microprocessor is a low-power applications processor based on ARM926EJ-S.
The device enables original-equipment manufacturers (OEMs) and original-design manufacturers (ODMs) to quickly bring to market devices featuring robust operating systems support, rich user interfaces, and high processing performance life through the maximum flexibility of a fully integrated mixed processor solution.
The ARM926EJ-S is a 32-bit RISC processor core that performs 32-bit or 16-bit instructions and processes 32-bit, 16-bit, or 8-bit data. The core uses pipelining so that all parts of the processor and memory system can operate continuously.
The ARM core has a coprocessor 15 (CP15), protection module, and data and program memory management units (MMUs) with table look-aside buffers. The ARM core processor has separate 16-KB instruction and 16-KB data caches. Both are four-way associative with virtual index virtual tag (VIVT). The ARM core also has 8KB of RAM (Vector Table) and 64KB of ROM.
The EMAC provides an efficient interface between the device and a network. The EMAC supports both 10Base-T and 100Base-TX, or 10 Mbps and 100 Mbps in either half- or full-duplex mode. Additionally, an MDIO interface is available for PHY configuration. The EMAC supports both MII and RMII interfaces.
The rich peripheral set provides the ability to control external peripheral devices and communicate with external processors. For details on each of the peripherals, see the related sections in this document and the associated peripheral reference guides.
The device has a complete set of development tools for the ARM processor. These tools include C compilers, and scheduling, and a Windows® debugger interface for visibility into source code execution.

Features
• 300-MHz ARM926EJ-S™ RISC MPU
• ARM926EJ-S Core
   – 32-Bit and 16-Bit ( Thumb®) Instructions
   – Single-Cycle MAC
   – ARM Jazelle® Technology
   – Embedded ICE-RT™ for Real-Time Debug
• ARM9™ Memory Architecture
   – 16KB of Instruction Cache
   – 16KB of Data Cache
   – 8KB of RAM (Vector Table)
   – 64KB of ROM
• Enhanced Direct Memory Access Controller 3
   (EDMA3):
   – 2 Channel Controllers
   – 3 Transfer Controllers
   – 64 Independent DMA Channels
   – 16 Quick DMA Channels
   – Programmable Transfer Burst Size
• 128KB of On-Chip Memory
• 1.8-V or 3.3-V LVCMOS I/Os (Except for USB and
   DDR2 Interfaces)
• Two External Memory Interfaces:
   – EMIFA
      • NOR (8- or 16-Bit-Wide Data)
      • NAND (8- or 16-Bit-Wide Data)
      • 16-Bit SDRAM with 128-MB Address Space
   – DDR2/Mobile DDR Memory Controller with one
      of the following:
      • 16-Bit DDR2 SDRAM with 256-MB Address
         Space
      • 16-Bit mDDR SDRAM with 256-MB Address
         Space
• Three Configurable 16550-Type UART Modules:
   – With Modem Control Signals
   – 16-Byte FIFO
   – 16x or 13x Oversampling Option(Continue ...)

Applications
• Medical, Healthcare, and Fitness
• ePOS
• Building Automation


other parts : AM1802  AM1802BZCED3  AM1802BZWTD3  AM1802EZCED3  AM1802EZWTD3  AM1802ZCE  
AM1802ZWT PDF
TI
Texas Instruments
AM1802EZWTD3 AM1802 ARM® Microprocessor

Description
The AM1802 ARM microprocessor is a low-power applications processor based on ARM926EJ-S.
The device enables original-equipment manufacturers (OEMs) and original-design manufacturers (ODMs) to quickly bring to market devices featuring robust operating systems support, rich user interfaces, and high processing performance life through the maximum flexibility of a fully integrated mixed processor solution.
The ARM926EJ-S is a 32-bit RISC processor core that performs 32-bit or 16-bit instructions and processes 32-bit, 16-bit, or 8-bit data. The core uses pipelining so that all parts of the processor and memory system can operate continuously.
The ARM core has a coprocessor 15 (CP15), protection module, and data and program memory management units (MMUs) with table look-aside buffers. The ARM core processor has separate 16-KB instruction and 16-KB data caches. Both are four-way associative with virtual index virtual tag (VIVT). The ARM core also has 8KB of RAM (Vector Table) and 64KB of ROM.
The EMAC provides an efficient interface between the device and a network. The EMAC supports both 10Base-T and 100Base-TX, or 10 Mbps and 100 Mbps in either half- or full-duplex mode. Additionally, an MDIO interface is available for PHY configuration. The EMAC supports both MII and RMII interfaces.
The rich peripheral set provides the ability to control external peripheral devices and communicate with external processors. For details on each of the peripherals, see the related sections in this document and the associated peripheral reference guides.
The device has a complete set of development tools for the ARM processor. These tools include C compilers, and scheduling, and a Windows® debugger interface for visibility into source code execution.

Features
• 300-MHz ARM926EJ-S™ RISC MPU
• ARM926EJ-S Core
   – 32-Bit and 16-Bit ( Thumb®) Instructions
   – Single-Cycle MAC
   – ARM Jazelle® Technology
   – Embedded ICE-RT™ for Real-Time Debug
• ARM9™ Memory Architecture
   – 16KB of Instruction Cache
   – 16KB of Data Cache
   – 8KB of RAM (Vector Table)
   – 64KB of ROM
• Enhanced Direct Memory Access Controller 3
   (EDMA3):
   – 2 Channel Controllers
   – 3 Transfer Controllers
   – 64 Independent DMA Channels
   – 16 Quick DMA Channels
   – Programmable Transfer Burst Size
• 128KB of On-Chip Memory
• 1.8-V or 3.3-V LVCMOS I/Os (Except for USB and
   DDR2 Interfaces)
• Two External Memory Interfaces:
   – EMIFA
      • NOR (8- or 16-Bit-Wide Data)
      • NAND (8- or 16-Bit-Wide Data)
      • 16-Bit SDRAM with 128-MB Address Space
   – DDR2/Mobile DDR Memory Controller with one
      of the following:
      • 16-Bit DDR2 SDRAM with 256-MB Address
         Space
      • 16-Bit mDDR SDRAM with 256-MB Address
         Space
• Three Configurable 16550-Type UART Modules:
   – With Modem Control Signals
   – 16-Byte FIFO
   – 16x or 13x Oversampling Option(Continue ...)

Applications
• Medical, Healthcare, and Fitness
• ePOS
• Building Automation


other parts : AM1802  AM1802BZCED3  AM1802BZWTD3  AM1802EZCED3  AM1802ZWT  AM1802ZCE  
AM1802EZWTD3 PDF
TI
Texas Instruments
AM1802BZWTD3 AM1802 ARM® Microprocessor

Description
The AM1802 ARM microprocessor is a low-power applications processor based on ARM926EJ-S.
The device enables original-equipment manufacturers (OEMs) and original-design manufacturers (ODMs) to quickly bring to market devices featuring robust operating systems support, rich user interfaces, and high processing performance life through the maximum flexibility of a fully integrated mixed processor solution.
The ARM926EJ-S is a 32-bit RISC processor core that performs 32-bit or 16-bit instructions and processes 32-bit, 16-bit, or 8-bit data. The core uses pipelining so that all parts of the processor and memory system can operate continuously.
The ARM core has a coprocessor 15 (CP15), protection module, and data and program memory management units (MMUs) with table look-aside buffers. The ARM core processor has separate 16-KB instruction and 16-KB data caches. Both are four-way associative with virtual index virtual tag (VIVT). The ARM core also has 8KB of RAM (Vector Table) and 64KB of ROM.
The EMAC provides an efficient interface between the device and a network. The EMAC supports both 10Base-T and 100Base-TX, or 10 Mbps and 100 Mbps in either half- or full-duplex mode. Additionally, an MDIO interface is available for PHY configuration. The EMAC supports both MII and RMII interfaces.
The rich peripheral set provides the ability to control external peripheral devices and communicate with external processors. For details on each of the peripherals, see the related sections in this document and the associated peripheral reference guides.
The device has a complete set of development tools for the ARM processor. These tools include C compilers, and scheduling, and a Windows® debugger interface for visibility into source code execution.

Features
• 300-MHz ARM926EJ-S™ RISC MPU
• ARM926EJ-S Core
   – 32-Bit and 16-Bit ( Thumb®) Instructions
   – Single-Cycle MAC
   – ARM Jazelle® Technology
   – Embedded ICE-RT™ for Real-Time Debug
• ARM9™ Memory Architecture
   – 16KB of Instruction Cache
   – 16KB of Data Cache
   – 8KB of RAM (Vector Table)
   – 64KB of ROM
• Enhanced Direct Memory Access Controller 3
   (EDMA3):
   – 2 Channel Controllers
   – 3 Transfer Controllers
   – 64 Independent DMA Channels
   – 16 Quick DMA Channels
   – Programmable Transfer Burst Size
• 128KB of On-Chip Memory
• 1.8-V or 3.3-V LVCMOS I/Os (Except for USB and
   DDR2 Interfaces)
• Two External Memory Interfaces:
   – EMIFA
      • NOR (8- or 16-Bit-Wide Data)
      • NAND (8- or 16-Bit-Wide Data)
      • 16-Bit SDRAM with 128-MB Address Space
   – DDR2/Mobile DDR Memory Controller with one
      of the following:
      • 16-Bit DDR2 SDRAM with 256-MB Address
         Space
      • 16-Bit mDDR SDRAM with 256-MB Address
         Space
• Three Configurable 16550-Type UART Modules:
   – With Modem Control Signals
   – 16-Byte FIFO
   – 16x or 13x Oversampling Option(Continue ...)

Applications
• Medical, Healthcare, and Fitness
• ePOS
• Building Automation


other parts : AM1802  AM1802BZCED3  AM1802EZCED3  AM1802EZWTD3  AM1802ZWT  AM1802ZCE  
AM1802BZWTD3 PDF
TI
Texas Instruments
AM1802EZCED3 AM1802 ARM® Microprocessor

Description
The AM1802 ARM microprocessor is a low-power applications processor based on ARM926EJ-S.
The device enables original-equipment manufacturers (OEMs) and original-design manufacturers (ODMs) to quickly bring to market devices featuring robust operating systems support, rich user interfaces, and high processing performance life through the maximum flexibility of a fully integrated mixed processor solution.
The ARM926EJ-S is a 32-bit RISC processor core that performs 32-bit or 16-bit instructions and processes 32-bit, 16-bit, or 8-bit data. The core uses pipelining so that all parts of the processor and memory system can operate continuously.
The ARM core has a coprocessor 15 (CP15), protection module, and data and program memory management units (MMUs) with table look-aside buffers. The ARM core processor has separate 16-KB instruction and 16-KB data caches. Both are four-way associative with virtual index virtual tag (VIVT). The ARM core also has 8KB of RAM (Vector Table) and 64KB of ROM.
The EMAC provides an efficient interface between the device and a network. The EMAC supports both 10Base-T and 100Base-TX, or 10 Mbps and 100 Mbps in either half- or full-duplex mode. Additionally, an MDIO interface is available for PHY configuration. The EMAC supports both MII and RMII interfaces.
The rich peripheral set provides the ability to control external peripheral devices and communicate with external processors. For details on each of the peripherals, see the related sections in this document and the associated peripheral reference guides.
The device has a complete set of development tools for the ARM processor. These tools include C compilers, and scheduling, and a Windows® debugger interface for visibility into source code execution.

Features
• 300-MHz ARM926EJ-S™ RISC MPU
• ARM926EJ-S Core
   – 32-Bit and 16-Bit ( Thumb®) Instructions
   – Single-Cycle MAC
   – ARM Jazelle® Technology
   – Embedded ICE-RT™ for Real-Time Debug
• ARM9™ Memory Architecture
   – 16KB of Instruction Cache
   – 16KB of Data Cache
   – 8KB of RAM (Vector Table)
   – 64KB of ROM
• Enhanced Direct Memory Access Controller 3
   (EDMA3):
   – 2 Channel Controllers
   – 3 Transfer Controllers
   – 64 Independent DMA Channels
   – 16 Quick DMA Channels
   – Programmable Transfer Burst Size
• 128KB of On-Chip Memory
• 1.8-V or 3.3-V LVCMOS I/Os (Except for USB and
   DDR2 Interfaces)
• Two External Memory Interfaces:
   – EMIFA
      • NOR (8- or 16-Bit-Wide Data)
      • NAND (8- or 16-Bit-Wide Data)
      • 16-Bit SDRAM with 128-MB Address Space
   – DDR2/Mobile DDR Memory Controller with one
      of the following:
      • 16-Bit DDR2 SDRAM with 256-MB Address
         Space
      • 16-Bit mDDR SDRAM with 256-MB Address
         Space
• Three Configurable 16550-Type UART Modules:
   – With Modem Control Signals
   – 16-Byte FIFO
   – 16x or 13x Oversampling Option(Continue ...)

Applications
• Medical, Healthcare, and Fitness
• ePOS
• Building Automation


other parts : AM1802  AM1802BZCED3  AM1802BZWTD3  AM1802EZWTD3  AM1802ZWT  AM1802ZCE  
AM1802EZCED3 PDF
TI
Texas Instruments
AM1802BZCED3 AM1802 ARM® Microprocessor

Description
The AM1802 ARM microprocessor is a low-power applications processor based on ARM926EJ-S.
The device enables original-equipment manufacturers (OEMs) and original-design manufacturers (ODMs) to quickly bring to market devices featuring robust operating systems support, rich user interfaces, and high processing performance life through the maximum flexibility of a fully integrated mixed processor solution.
The ARM926EJ-S is a 32-bit RISC processor core that performs 32-bit or 16-bit instructions and processes 32-bit, 16-bit, or 8-bit data. The core uses pipelining so that all parts of the processor and memory system can operate continuously.
The ARM core has a coprocessor 15 (CP15), protection module, and data and program memory management units (MMUs) with table look-aside buffers. The ARM core processor has separate 16-KB instruction and 16-KB data caches. Both are four-way associative with virtual index virtual tag (VIVT). The ARM core also has 8KB of RAM (Vector Table) and 64KB of ROM.
The EMAC provides an efficient interface between the device and a network. The EMAC supports both 10Base-T and 100Base-TX, or 10 Mbps and 100 Mbps in either half- or full-duplex mode. Additionally, an MDIO interface is available for PHY configuration. The EMAC supports both MII and RMII interfaces.
The rich peripheral set provides the ability to control external peripheral devices and communicate with external processors. For details on each of the peripherals, see the related sections in this document and the associated peripheral reference guides.
The device has a complete set of development tools for the ARM processor. These tools include C compilers, and scheduling, and a Windows® debugger interface for visibility into source code execution.

Features
• 300-MHz ARM926EJ-S™ RISC MPU
• ARM926EJ-S Core
   – 32-Bit and 16-Bit ( Thumb®) Instructions
   – Single-Cycle MAC
   – ARM Jazelle® Technology
   – Embedded ICE-RT™ for Real-Time Debug
• ARM9™ Memory Architecture
   – 16KB of Instruction Cache
   – 16KB of Data Cache
   – 8KB of RAM (Vector Table)
   – 64KB of ROM
• Enhanced Direct Memory Access Controller 3
   (EDMA3):
   – 2 Channel Controllers
   – 3 Transfer Controllers
   – 64 Independent DMA Channels
   – 16 Quick DMA Channels
   – Programmable Transfer Burst Size
• 128KB of On-Chip Memory
• 1.8-V or 3.3-V LVCMOS I/Os (Except for USB and
   DDR2 Interfaces)
• Two External Memory Interfaces:
   – EMIFA
      • NOR (8- or 16-Bit-Wide Data)
      • NAND (8- or 16-Bit-Wide Data)
      • 16-Bit SDRAM with 128-MB Address Space
   – DDR2/Mobile DDR Memory Controller with one
      of the following:
      • 16-Bit DDR2 SDRAM with 256-MB Address
         Space
      • 16-Bit mDDR SDRAM with 256-MB Address
         Space
• Three Configurable 16550-Type UART Modules:
   – With Modem Control Signals
   – 16-Byte FIFO
   – 16x or 13x Oversampling Option(Continue ...)

Applications
• Medical, Healthcare, and Fitness
• ePOS
• Building Automation


other parts : AM1802  AM1802BZWTD3  AM1802EZCED3  AM1802EZWTD3  AM1802ZWT  AM1802ZCE  
AM1802BZCED3 PDF

1

New and Popular Datasheet

LM317  PN2222A  1N4007  LM324N  SFH4250S  FR2A  PWR-TOP200YAI  TOP210PF1  PM75RSK060  PM75RSK060  PM75RSD060  PM75RSA060  AR9280  GI851  GI851  GI824  RTR6280  PI3HDMI412AD  AR9280  QCA4002  P6CU-1212E  GI824  PT2399  AR8031  Z86E06_04  TNY253GN  TM200RZ-2H  RU-050515  PT2314E  PT2253A  PM6610  PE4259  OPF392A  ISL6525CBZ  CM300DY-24NFH  BUK456-200  BUK456-100A  23Z467SM  MSM8974  SB1060  SFH4250S-R2  PFS708EG  1985881  BA4918  LRG6SP  Q65110A2286  PI5L100  MYS380  1N4448  CBD10120LCT  XPS-4102WG  BTRS-5640G  VTB100H  TSP120A  TDA2030A  Part List  Manufacturers List 


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]