datasheetbank_Logo    Integrated circuits, Transistor, Semiconductors Search and Datasheet PDF Download Site
Part Number :
Home  >>>  ADS7960SDBT Datasheet

ADS7960SDBT

  

Datasheet PDF

Match, Like ADS7960SDBT ADS7960SDBTR
Start with ADS7960SDBTG* ADS7960SDBTR*
End N/A
Included N/A
View Details    
Manufacturer Part no Description View
TI
Texas Instruments
ADS7960SDBT 12/10/8-Bit, 1 MSPS, 16/12/8/4-Channel, Single-Ended, MicroPower, Serial Interface ADCs

DESCRIPTION
The ADS79XX is a 12/10/8-bit multichannel analog-to-digital converter family. The following table shows all twelve devices from this product family. The devices include a capacitor based SAR A/D converter with inherent sample and hold.
The devices accept a wide analog supply range from 2.7V to 5.25V. Very low power consumption makes these devices suitable for battery-powered and isolated power supply applications.
A wide 1.7V to 5.25V I/O supply range facilitates a glue-less interface with the most commonly used CMOS digital hosts.
The serial interface is controlled by CS and SCLK for easy connection with microprocessors and DSP.
The input signal is sampled with the falling edge of CS. It uses SCLK for conversion, serial data output, and reading serial data in. The devices allow auto sequencing of preselected channels or manual selection of a channel for the next conversion cycle.
There are two software selectable input ranges (0V - 2.5V and 0V - 5V), four individually configurable GPIOs ( in case of TSSOP package devices), and two programmable alarm thresholds per channel.
These features make the devices suitable for most data acquisition applications.
The devices offer an attractive power-down feature. This is extremely useful for power saving when the device is operated at lower conversion speeds.
The 16/12-channel devices from this family are available in a 38-pin TSSOP and 32 pin QFN package and the 4/8-channel devices are available in a 30-pin TSSOP and 24 pin QFN packages.

FEATURES
• 1-MHz Sample Rate Serial Devices
• Product Family of 12/10/8-Bit Resolution
• Zero Latency
• 20-MHz Serial Interface
• Analog Supply Range: 2.7 to 5.25V
• I/O Supply Range: 1.7 to 5.25V
• Two SW Selectable Unipolar, Input Ranges: 0
   to 2.5V and 0 to 5V
• Auto and Manual Modes for Channel Selection
• 12,8,4-Channel Devices can Share 16 Channel
   Device Footprint
• Two Programmable Alarm Levels per Channel
• Four Individually Configurable GPIOs for
   TSSOP package devices. One GPIO for QFN
   devices
• Typical Power Dissipation: 14.5 mW (+VA = 5V,
   +VBD = 3V) at 1 MSPS
• Power-Down Current (1 mA)
• Input Bandwidth (47 MHz at 3dB)
• 38-,30-Pin TSSOP and 32-,24-Pin QFN
   Packages

APPLICATIONS
• PLC / IPC
• Battery Powered Systems
• Medical Instrumentation
• Digital Power Supplies
• Touch Screen Controllers
• High-Speed Data Acquisition Systems
• High-Speed Closed-Loop Systems


other parts : ADS7950  ADS7950SBDBT  ADS7950SBDBTG4  ADS7950SBDBTR  ADS7950SBDBTRG4  ADS7950SBRGER  ADS7950SBRGET  ADS7950SDBT  ADS7950SDBTG4  ADS7950SDBTR  
ADS7960SDBT PDF
TI
Texas Instruments
ADS7960SDBTR 12/10/8-Bit, 1 MSPS, 16/12/8/4-Channel, Single-Ended, MicroPower, Serial Interface ADCs

DESCRIPTION
The ADS79XX is a 12/10/8-bit multichannel analog-to-digital converter family. The following table shows all twelve devices from this product family. The devices include a capacitor based SAR A/D converter with inherent sample and hold.
The devices accept a wide analog supply range from 2.7V to 5.25V. Very low power consumption makes these devices suitable for battery-powered and isolated power supply applications.
A wide 1.7V to 5.25V I/O supply range facilitates a glue-less interface with the most commonly used CMOS digital hosts.
The serial interface is controlled by CS and SCLK for easy connection with microprocessors and DSP.
The input signal is sampled with the falling edge of CS. It uses SCLK for conversion, serial data output, and reading serial data in. The devices allow auto sequencing of preselected channels or manual selection of a channel for the next conversion cycle.
There are two software selectable input ranges (0V - 2.5V and 0V - 5V), four individually configurable GPIOs ( in case of TSSOP package devices), and two programmable alarm thresholds per channel.
These features make the devices suitable for most data acquisition applications.
The devices offer an attractive power-down feature. This is extremely useful for power saving when the device is operated at lower conversion speeds.
The 16/12-channel devices from this family are available in a 38-pin TSSOP and 32 pin QFN package and the 4/8-channel devices are available in a 30-pin TSSOP and 24 pin QFN packages.

FEATURES
• 1-MHz Sample Rate Serial Devices
• Product Family of 12/10/8-Bit Resolution
• Zero Latency
• 20-MHz Serial Interface
• Analog Supply Range: 2.7 to 5.25V
• I/O Supply Range: 1.7 to 5.25V
• Two SW Selectable Unipolar, Input Ranges: 0
   to 2.5V and 0 to 5V
• Auto and Manual Modes for Channel Selection
• 12,8,4-Channel Devices can Share 16 Channel
   Device Footprint
• Two Programmable Alarm Levels per Channel
• Four Individually Configurable GPIOs for
   TSSOP package devices. One GPIO for QFN
   devices
• Typical Power Dissipation: 14.5 mW (+VA = 5V,
   +VBD = 3V) at 1 MSPS
• Power-Down Current (1 mA)
• Input Bandwidth (47 MHz at 3dB)
• 38-,30-Pin TSSOP and 32-,24-Pin QFN
   Packages

APPLICATIONS
• PLC / IPC
• Battery Powered Systems
• Medical Instrumentation
• Digital Power Supplies
• Touch Screen Controllers
• High-Speed Data Acquisition Systems
• High-Speed Closed-Loop Systems


other parts : ADS7950  ADS7950SBDBT  ADS7950SBDBTG4  ADS7950SBDBTR  ADS7950SBDBTRG4  ADS7950SBRGER  ADS7950SBRGET  ADS7950SDBT  ADS7950SDBTG4  ADS7950SDBTR  
ADS7960SDBTR PDF
TI
Texas Instruments
ADS7960SDBTG4 12/10/8-Bit, 1 MSPS, 16/12/8/4-Channel, Single-Ended, MicroPower, Serial Interface ADCs

DESCRIPTION
The ADS79XX is a 12/10/8-bit multichannel analog-to-digital converter family. The following table shows all twelve devices from this product family. The devices include a capacitor based SAR A/D converter with inherent sample and hold.
The devices accept a wide analog supply range from 2.7V to 5.25V. Very low power consumption makes these devices suitable for battery-powered and isolated power supply applications.
A wide 1.7V to 5.25V I/O supply range facilitates a glue-less interface with the most commonly used CMOS digital hosts.
The serial interface is controlled by CS and SCLK for easy connection with microprocessors and DSP.
The input signal is sampled with the falling edge of CS. It uses SCLK for conversion, serial data output, and reading serial data in. The devices allow auto sequencing of preselected channels or manual selection of a channel for the next conversion cycle.
There are two software selectable input ranges (0V - 2.5V and 0V - 5V), four individually configurable GPIOs ( in case of TSSOP package devices), and two programmable alarm thresholds per channel.
These features make the devices suitable for most data acquisition applications.
The devices offer an attractive power-down feature. This is extremely useful for power saving when the device is operated at lower conversion speeds.
The 16/12-channel devices from this family are available in a 38-pin TSSOP and 32 pin QFN package and the 4/8-channel devices are available in a 30-pin TSSOP and 24 pin QFN packages.

FEATURES
• 1-MHz Sample Rate Serial Devices
• Product Family of 12/10/8-Bit Resolution
• Zero Latency
• 20-MHz Serial Interface
• Analog Supply Range: 2.7 to 5.25V
• I/O Supply Range: 1.7 to 5.25V
• Two SW Selectable Unipolar, Input Ranges: 0
   to 2.5V and 0 to 5V
• Auto and Manual Modes for Channel Selection
• 12,8,4-Channel Devices can Share 16 Channel
   Device Footprint
• Two Programmable Alarm Levels per Channel
• Four Individually Configurable GPIOs for
   TSSOP package devices. One GPIO for QFN
   devices
• Typical Power Dissipation: 14.5 mW (+VA = 5V,
   +VBD = 3V) at 1 MSPS
• Power-Down Current (1 mA)
• Input Bandwidth (47 MHz at 3dB)
• 38-,30-Pin TSSOP and 32-,24-Pin QFN
   Packages

APPLICATIONS
• PLC / IPC
• Battery Powered Systems
• Medical Instrumentation
• Digital Power Supplies
• Touch Screen Controllers
• High-Speed Data Acquisition Systems
• High-Speed Closed-Loop Systems


other parts : ADS7950  ADS7950SBDBT  ADS7950SBDBTG4  ADS7950SBDBTR  ADS7950SBDBTRG4  ADS7950SBRGER  ADS7950SBRGET  ADS7950SDBT  ADS7950SDBTG4  ADS7950SDBTR  
ADS7960SDBTG4 PDF
TI
Texas Instruments
ADS7960SDBTRG4 12/10/8-Bit, 1 MSPS, 16/12/8/4-Channel, Single-Ended, MicroPower, Serial Interface ADCs

DESCRIPTION
The ADS79XX is a 12/10/8-bit multichannel analog-to-digital converter family. The following table shows all twelve devices from this product family. The devices include a capacitor based SAR A/D converter with inherent sample and hold.
The devices accept a wide analog supply range from 2.7V to 5.25V. Very low power consumption makes these devices suitable for battery-powered and isolated power supply applications.
A wide 1.7V to 5.25V I/O supply range facilitates a glue-less interface with the most commonly used CMOS digital hosts.
The serial interface is controlled by CS and SCLK for easy connection with microprocessors and DSP.
The input signal is sampled with the falling edge of CS. It uses SCLK for conversion, serial data output, and reading serial data in. The devices allow auto sequencing of preselected channels or manual selection of a channel for the next conversion cycle.
There are two software selectable input ranges (0V - 2.5V and 0V - 5V), four individually configurable GPIOs ( in case of TSSOP package devices), and two programmable alarm thresholds per channel.
These features make the devices suitable for most data acquisition applications.
The devices offer an attractive power-down feature. This is extremely useful for power saving when the device is operated at lower conversion speeds.
The 16/12-channel devices from this family are available in a 38-pin TSSOP and 32 pin QFN package and the 4/8-channel devices are available in a 30-pin TSSOP and 24 pin QFN packages.

FEATURES
• 1-MHz Sample Rate Serial Devices
• Product Family of 12/10/8-Bit Resolution
• Zero Latency
• 20-MHz Serial Interface
• Analog Supply Range: 2.7 to 5.25V
• I/O Supply Range: 1.7 to 5.25V
• Two SW Selectable Unipolar, Input Ranges: 0
   to 2.5V and 0 to 5V
• Auto and Manual Modes for Channel Selection
• 12,8,4-Channel Devices can Share 16 Channel
   Device Footprint
• Two Programmable Alarm Levels per Channel
• Four Individually Configurable GPIOs for
   TSSOP package devices. One GPIO for QFN
   devices
• Typical Power Dissipation: 14.5 mW (+VA = 5V,
   +VBD = 3V) at 1 MSPS
• Power-Down Current (1 mA)
• Input Bandwidth (47 MHz at 3dB)
• 38-,30-Pin TSSOP and 32-,24-Pin QFN
   Packages

APPLICATIONS
• PLC / IPC
• Battery Powered Systems
• Medical Instrumentation
• Digital Power Supplies
• Touch Screen Controllers
• High-Speed Data Acquisition Systems
• High-Speed Closed-Loop Systems


other parts : ADS7950  ADS7950SBDBT  ADS7950SBDBTG4  ADS7950SBDBTR  ADS7950SBDBTRG4  ADS7950SBRGER  ADS7950SBRGET  ADS7950SDBT  ADS7950SDBTG4  ADS7950SDBTR  
ADS7960SDBTRG4 PDF

1

New and Popular Datasheet

LM317  PN2222A  1N4007  LM324N  ZXLD1360Q  EM78566H  ZXT14P12DX  2N7000  BAS521  74AHCT125  74HCT08  BAV99BRW  BAV99BRW  BAV99BRW  BAV99BRW  BAV99BRW  BAV99BRW  BAV99BRW  2N7002  2N7002  2N7002  2N7002  2N7002  ZXT14P12DX  PR1507  MBR4045  AP1507  74LVC1G08W5  74LVC1G07  74HCT32  2N7002V  2DC4672  ZXLD1360  BAV99BRW  2N7002  2N7002DW  PR1507GS  CDB5505  CS5342_06  CDB5343  CS4362A_08  CS4362A_09  WM8804_09  PS2502  PS2501-1  HPR100  NKE0505S  MC74HC7266  5082-761X  BP3106  BDW73  BCM84728  BC337  2N7002  TDA2030A  Part List  Manufacturers List 


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

@ 2014 - 2018  [ Home ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]