M45PE10-VMN6TP 데이터 시트보기 (PDF) - Numonyx -> Micron
부품명
상세내역
제조사
M45PE10-VMN6TP
Numonyx -> Micron
M45PE10-VMN6TP Datasheet PDF : 47 Pages
| |||
DC and AC parameters
M45PE10
Table 13.
AC characteristics (33 MHz operation)
33 MHz only available for products marked since week 40 of 2005(1)
Test conditions specified in Table 8 and Table 9
Symbol Alt.
Parameter
Min.
Typ.
Max. Unit
Clock frequency for the following
fC
fC instructions: FAST_READ, PW, PP, PE, D.C.
SE, DP, RDP, WREN, WRDI, RDSR
33
MHz
fR
tCH(2)
tCL(2)
Clock frequency for READ instructions
tCLH Clock High time
tCLL Clock Low time
Clock slew rate(3) (peak to peak)
D.C.
13
13
0.03
20
MHz
ns
ns
V/ns
tSLCH tCSS S active setup time (relative to C)
10
ns
tCHSL
S not active hold time (relative to C)
10
ns
tDVCH tDSU Data in setup time
3
ns
tCHDX tDH Data in hold time
5
ns
tCHSH
S active hold time (relative to C)
5
ns
tSHCH
S not active setup time (relative to C)
5
ns
tSHSL
tSHQZ(3)
tCSH S deselect time
tDIS Output disable time
200
ns
12
ns
tCLQV
tV Clock Low to Output valid
12
ns
tCLQX tHO Output hold time
0
ns
tTHSL
Top Sector Lock setup time
50
ns
tSHTL
Top Sector Lock hold time
100
tDP(3)
S to deep power-down
tRDP(3)
S High to standby power mode
ns
3
µs
30
µs
tPW(4)
Page write cycle time (256 bytes)
Page write cycle time (n bytes)
11
10.2+
25
ms
n*0.8/256
tPP(4)
Page program cycle time (256 bytes)
Page program cycle time (n bytes)
1.2
0.4+
5
ms
n*0.8/256
tPE
Page erase cycle time
10
20
ms
tSE
Sector erase cycle time
1
5
s
1. Details of how to find the date of marking are given in application note, AN1995.
2. tCH + tCL must be greater than or equal to 1/ fC.
3. Value guaranteed by characterization, not 100% tested in production.
4. When using PP and PW instructions to update consecutive bytes, optimized timings are obtained with one
sequence including all the bytes versus several sequences of only a few bytes (1 ≤ n ≤ 256).
38/47
Share Link: 