ST7FMC2N6B6(2004) 데이터 시트보기 (PDF) - STMicroelectronics
부품명
상세내역
제조사
ST7FMC2N6B6
(Rev.:2004)
(Rev.:2004)
STMicroelectronics
ST7FMC2N6B6 Datasheet PDF : 294 Pages
| |||
ST7MC1/ST7MC2
11.4 SUPPLY CURRENT CHARACTERISTICS
The following current consumption specified for the ST7 functional operating modes over temperature
range does not take into account the clock source current consumption. To get the total device consump-
tion, the two current values must be added (except for HALT mode for which the clock is stopped).
11.4.1 RUN and SLOW Modes (Flash devices)
Symbol
Parameter
Supply current in RUN mode 2)
(see Figure 129)
Conditions
fOSC=16MHz, fCPU=8MHz
Typ Max 1) Unit
12
18
mA
IDD Supply current in SLOW mode 2)
(see Figure 130)
fOSC=16MHz, fCPU=500kHz
5
8
mA
Figure 129. Typical IDD in RUN vs. fCPU
Figure 130. Typical IDD in SLOW vs. fCPU
16.0
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0.0
0
1
2
3
4
5
6
7
8
Fcpu Mhz
3.0
2.5
2.0
1.5
1.0
0.5
0.0
0
1
2
3
4
5
6
7
8
Fcpu Mhz
Notes:
1. Data based on characterization results, tested in production at VDD max. and fCPU max.
2. Measurements are done in the following conditions:
- Progam executed from RAM, CPU running with RAM access. The increase in consumption when executing from Flash
is 50%.
- All I/O pins in input mode with a static value at VDD or VSS (no load)
- All peripherals in reset state.
- LVD disabled.
- Clock input (OSC1) driven by external square wave.
- In SLOW and SLOW WAIT mode, fCPU is based on fOSC divided by 32.
To obtain the total current consumption of the device, add the clock source (Section 11.5.3) and the peripheral power
consumption.
248/294
Share Link: 