T-51384L079J-FW-P-AA 데이터 시트보기 (PDF) - Optrex Corporation
부품명
상세내역
제조사
T-51384L079J-FW-P-AA Datasheet PDF : 20 Pages
| |||
Note 5-1-2: CKC= Low (VGA mode)
a. If CKC=0, the phase lock loop (PLL) is not adopted in the LCD module.
b. If CKC=0, the external clock input frequency of Pin 3 is 25.175 MHz.
c. Input external Horizontal Sync (Pin 1) to synchronize the LCD module. External
Horizontal Sync and External Vertical Sync input pulse can be high going or low
going.
0. The cycle of external Horizontal Sync input is 31.8µs. The cycle of external Vertical
Sync input is 525H.
Note 5-2：VGH TYP.＝+17V
Note 5-3：VGL TYP.＝-15V
Note 5-4：VDDTYP.＝+5V
Note 5-5：VCC TYP.＝+5V
Note 5-6 : Low (0V) for shift Right; Input Hi (+5.0V) for inverse (shift Left).
Note 5-7 : Hi (+5.0V) for DOWN; Low (0V) for UP.
Note 5-8 : PAL= LOW(0V),NTSC= Hi(+5.0V)
Note5-6
Note5-7
Note5-8
Low
Right
Down
PAL
High
Left
Up
NTSC
5-2) Backlight driving
Pin No
1
2
3
Symbol
VL1
NC
VL2
Description
Input terminal (Hi voltage side)
NO Connection
Input terminal (Low voltage side)
Remark
Wire color: pink
Wire color: white
Note 5-9
Note 5-9：Low voltage side of backlight inverter connects with Ground of inverter circuits.
5-3) Input / Output Connector
A)LCD Module Connector
6200-20P (Molex)
FFC Down Connector
20 Pins
Pitch：1.0 mm
B) Backlight Connector
JST BHR-03VS-1
Pin No.：3
Pitch：4 mm
Pink: High Voltage
White: Low Voltage
T-51384L079J-FW-P-AA
OPTREX CORPORATION
Page-5/20
Share Link: 