NTE Electronics
Description:
The NTE1533 is developed for Tuning AM on a Car Radio. It uses low voltage oscillation to achieve varactor diode tuning instead of variable inductance tuning.
Functions:
An RF Amplifier
A Mixer
An Oscillator with Automatic Level Control (ALC)
An IF Amplifier
A Detector
Normal AGC
Wide Band AGC on an RF Amplifier
FEATUREs:
Double Balanced Mixer: Recovers IF and Spurious Interference.
Normal AGC: Less Influence of Detector Output against Varying Input.
RF Wide Band AFC: Low Operating Level (300mVRMS) Recovers Intermodulation Distortion,Large Input Characteristic at Tuning Case of Varactor Diodes.
AGC Driving Output to FET: Applies AGC to the Input FET at Varactor Diode Tuning.
Automatic Level Control at Oscillator: Recovers a Tracking Error because an Oscillation Output is Stabilized at Low Voltage Level (350mVRMS) for Varactor Diode Tuning.
Reference Voltage Output: 5.6V Reference Voltage for Other Uses.
Compensation for VCC error: Lower gain error and distortion over 7.5V to 16.0V.
Lower Ripple Voltage: Less Modulation of Carrier by Supply Voltage Ripples.
Low Pop Noise: Of Time Constant of AGC at VCC On and Mode Switch On.
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Maximum Supply Voltage (Pin7, Pin13), VCCmax . . . . . . . .. . . . . . 16V
Maximum Output Voltage (Pin5), VO5 . . . . . . . . . . . . .. . . . . . . . . . 17V
Maximum Output Voltage (Pin8, Pin11), VO8, VO11 . . . . . . . . . . . 24V
Maximum Input Voltage (Pin2), VImax . . . . . . . . . . . . . . . . . . . . . 5.6V
Maximum Supply Current (Pin5, Pin7, Pin8, Pin11, Pin13 summed), ICCmax . . . . . . 35mA
Maximum Flow Out Current (Pin3), I3 . . . . . . . . . . . . . . . . . . . . . . . . . . 6mA
Allowable Power Dissipation (TA ≤ +45°C) , Pdmax . . . . . . . . . . . . . . . . 520mW
Operating Temperature Range, Topg . . . . . . . . . . . . . . . . .. . . . . . . −20° to +70°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . .. . . . . . . −40° to +125°C