CS493263-CL View Datasheet(PDF) - Cirrus Logic

Part Name

Description

MFG CO.

CS493263-CL

Multi-Standard Audio Decoder Family

Cirrus Logic 

CS49300 Family DSP

SCLK—Audio Output Bit Clock: Pin 43

Bidirectional digital-audio output bit clock. SCLK can be an output that is derived from MCLK

to provide 32 Fs, 64 Fs, 128 Fs, 256 Fs, or 512 Fs, depending on the MCLK rate and the

digital-output configuration. SCLK can also be an input and must be at least 48Fs or greater.

As an input, SCLK is independent of MCLK. BIDIRECTIONAL - Default: INPUT

LRCLK—Audio Output Sample Rate Clock: Pin 42

Bidirectional digital-audio output-sample-rate clock. LRCLK can be an output that is divided

from MCLK to provide the output sample rate depending on the output configuration. LRCLK

can also be an input. As an input LRCLK is independent of MCLK.

BIDIRECTIONAL - Default: INPUT

AUDATA3,XMT958—SPDIF Transmitter Output, Digital Audio Output 3: Pin 3

CMOS level output that contains a biphase-mark encoded (S/PDIF) or I2S or Left Justified

digital audio data which is capable of carrying two channels of PCM digital audio or an

IEC61937 compressed-data interface.

Note: Outputting of IEC61937 is only available for certain broadcast-based application codes which run on

the CS4931X family or CS49330 device.

This output typically connects to the input of an RS-422 transmitter or to the input of an optical

transmitter. OUTPUT

SCLKN1, STCCLK2—PCM Audio Input Bit Clock: Pin 25

Bidirectional digital-audio bit clock that is an output in master mode and an input in slave

mode. In slave mode, SCLKN1 operates asynchronously from all other CS493XX clocks. In

master mode, SCLKN1 is derived from the CS493XX internal clock generator. In either master

or slave mode, the active edge of SCLKN1 can be programmed by the DSP. For applications

supporting PES layer synchronization this pin can be used as STCCLK2, which provides a

path to the internal STC 33 bit counter. BIDIRECTIONAL - Default: INPUT

LRCLKN1—PCM Audio Input Sample Rate Clock: Pin 26

Bidirectional digital-audio frame clock that is an output in master mode and an input in slave

mode. LRCLKN1 typically is run at the sampling frequency. In slave mode, LRCLKN1 operates

asynchronously from all other CS493XX clocks. In master mode, LRCLKN1 is derived from the

CS493XX internal clock generator. In either master or slave mode, the polarity of LRCLKN1 for

a particular subframe can be programmed by the DSP.

BIDIRECTIONAL - Default: INPUT

SDATAN1—PCM Audio Data Input Number One: Pin 22

Digital-audio data input that can accept from one to six channels of compressed or PCM data.

SDATAN1 can be sampled with either edge of SCLKN1, depending on how SCLKN1 has been

configured. INPUT

CMPCLK, SCLKN2—PCM Audio Input Bit Clock: Pin 28

Bidirectional digital-audio bit clock that is an output in master mode and an input in slave

mode. In slave mode, SCLKN2 operates asynchronously from all other CS493XX clocks. In

master mode, SCLKN2 is derived from the CS493XX internal clock generator. In either master

or slave mode, the active edge of SCLKN2 can be programmed by the DSP. If the CDI is

configured for bursty delivery, CMPCLK is an input used to sample CMPDAT. BIDIRECTIONAL

- Default: INPUT

DS339F7

85

Share Link: