C8051F521-C-IM View Datasheet(PDF) - Silicon Laboratories
Part Name
Description
MFG CO.
C8051F521-C-IM Datasheet PDF : 221 Pages
| |||
C8051F52x/F53x
SFR Definition 8.5. ACC: Accumulator
R/W
ACC.7
Bit7
R/W
ACC.6
Bit6
R/W
ACC.5
Bit5
R/W
ACC.4
Bit4
R/W
ACC.3
Bit3
R/W
ACC.2
Bit2
R/W
ACC.1
Bit1
R/W
Reset Value
ACC.0 00000000
Bit0
Bit
Addressable
SFR Address: 0xE0
Bits7–0: ACC: Accumulator.
This register is the accumulator for arithmetic operations.
SFR Definition 8.6. B: B Register
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Reset Value
B.7
B.6
B.5
B.4
B.3
B.2
B.1
B.0 00000000
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
Bit
Addressable
SFR Address: 0xF0
Bits7–0: B: B Register.
This register serves as a second accumulator for certain arithmetic operations.
8.3. Power Management Modes
The CIP-51 core has two software programmable power management modes: Idle and Stop. Idle mode
halts the CPU while leaving the peripherals and internal clocks active. In Stop mode, the CPU is halted, all
interrupts and timers (except the Missing Clock Detector) are inactive, and the internal oscillator is stopped
(analog peripherals remain in their selected states; the external oscillator is not affected). Since clocks are
running in Idle mode, power consumption is dependent upon the system clock frequency and the number
of peripherals left in active mode before entering Idle. Stop mode consumes the least power. SFR Defini-
tion 8.7 describes the Power Control Register (PCON) used to control the CIP-51's power management
modes.
Although the CIP-51 has Idle and Stop modes built in (as with any standard 8051 architecture), power
management of the entire MCU is better accomplished by enabling/disabling individual peripherals as
needed. Each analog peripheral can be disabled when not in use and placed in low power mode. Digital
peripherals, such as timers or serial buses, draw little power when they are not in use. Turning off the oscil-
lators lowers power consumption considerably; however a reset is required to restart the MCU.
The C8051F52x/F52xA/F53x/F53xA devices feature a low-power SUSPEND mode, which stops the inter-
nal oscillator until a wakening event occurs. See Section “14.1.1. Internal Oscillator Suspend Mode” on
page 136 for more information.
Rev. 1.4
89
Share Link: 