SST39VF1602C-70-4C-MAKE(2010) View Datasheet(PDF) - Silicon Storage Technology
Part Name
Description
MFG CO.
SST39VF1602C-70-4C-MAKE Datasheet PDF : 33 Pages
| |||
16 Mbit Multi-Purpose Flash Plus
SST39VF1601C / SST39VF1602C
Data Sheet
ELECTRICAL SPECIFICATIONS
Absolute Maximum Stress Ratings (Applied conditions greater than those listed under “Absolute Maximum
Stress Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation
of the device at these conditions or conditions greater than those defined in the operational sections of this data
sheet is not implied. Exposure to absolute maximum stress rating conditions may affect device reliability.)
Temperature Under Bias . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55°C to +125°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65°C to +150°C
D. C. Voltage on Any Pin to Ground Potential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to VDD+0.5V
Transient Voltage (<20 ns) on Any Pin to Ground Potential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -2.0V to VDD+2.0V
Voltage on A9 Pin to Ground Potential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to 13.2V
Package Power Dissipation Capability (TA = 25°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0W
Surface Mount Solder Reflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C for 10 seconds
Output Short Circuit Current1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
1. Outputs shorted for no more than one second. No more than one output shorted at a time.
Operating Range
Range
Commercial
Industrial
Ambient Temp
0°C to +70°C
-40°C to +85°C
VDD
2.7-3.6V
2.7-3.6V
AC Conditions of Test
Input Rise/Fall Time . . . . . . . . . . . . . . 5 ns
Output Load . . . . . . . . . . . . . . . . . . . . CL = 30 pF
See Figures 20 and 21
Power Up Specifications
All functionalities and DC specifications are specified for a VDD ramp rate of greater than 1V per 100 ms (0V to 3V
in less than 300 ms). If the VDD ramp rate is slower than 1V per 100 ms, a hardware reset is required. The recom-
mended VDD power-up to RESET# high time should be greater than 100 µs to ensure a proper reset.
VDD
RESET#
CE#
FIGURE 5: Power-Up Diagram
TPU-READ > 100 µs
VDD min
0V
VIH
TRHR > 50ns
1380 F24.0
©2010 Silicon Storage Technology, Inc.
13
S71380-04-000
05/10
Share Link: 