STM32F100VDT7BTR View Datasheet(PDF) - STMicroelectronics

Part Name

Description

MFG CO.

STM32F100VDT7BTR

High-density value line, advanced ARM-based 32-bit MCU with 256 to 512 KB Flash, 16 timers, ADC, DAC & 11 comm interfaces

STMicroelectronics 

Revision history

8

Revision history

STM32F100xC, STM32F100xD, STM32F100xE

Table 62. Document revision history

Date

Revision

Changes

09-Oct-2008

1

Initial release.

31-Mar-2009

I/O information clarified on page 1.

Table 5: High-density STM32F100xx pin definitions modified.

Figure 5: Memory map on page 26 modified.

Note modified in Table 13: Maximum current consumption in Run

mode, code with data processing running from Flash and Table 15:

Maximum current consumption in Sleep mode, code running from

Flash or RAM.

Table 20: High-speed external user clock characteristics and Table

2

21: Low-speed user external clock characteristics modified. ACCHSI

max values modified in Table 24: HSI oscillator characteristics.

Note modified in Table 13: Maximum current consumption in Run

mode, code with data processing running from Flash and Table 15:

Maximum current consumption in Sleep mode, code running from

Flash or RAM.

Figure 10, Figure 11 and Figure 12 show typical curves (titles

changed).

Small text changes.

01-Sep-2010

Major revision of whole document.

3

Added LQFP144 package and additional peripherals (SPI3, UART4,

UART, TIM5, 12, 14, 13, FSMC).

18-Oct-2010

Updated Power consumption data in Table 13 to Table 16

4

Updated Section 5.3.11: EMC characteristics on page 66

11-Apr-2011

Added Section 2.2.6: LCD parallel interface on page 13

In Table 4 on page 24 moved TIM15_BKIN and TIM17_BKIN from

remap to default column. Updated description of PA3, PA5 and PF6

to PF10.

Updated footnotes below Table 6: Voltage characteristics on page 36

and Table 7: Current characteristics on page 37

Added VBAT values in Table 16: Typical and maximum current

consumptions in Stop and Standby modes on page 43

Updated tw min in Table 20: High-speed external user clock

characteristics on page 47

5

Updated startup time in Table 23: LSE oscillator characteristics

(fLSE = 32.768 kHz) on page 51

Added HSI clock accuracy values in Table 24: HSI oscillator

characteristics on page 52

Updated FSMC Synchronous waveforms and timings on page 60

Updated Table 43: I/O static characteristics on page 69

Added Section 5.3.13: I/O current injection characteristics on

page 68

Corrected TTL and CMOS designations in Table 44: Output voltage

characteristics on page 72

96/98

Doc ID 15081 Rev 7

Share Link: