STM32L151RC View Datasheet(PDF) - STMicroelectronics

Part Name

Description

MFG CO.

STM32L151RC

Ultra-low-power 32-bit MCU ARM®-based Cortex®-M3, 256KB Flash, 32KB SRAM, 8KB EEPROM, LCD, USB, ADC, DAC

STMicroelectronics 

STM32L151xC STM32L152xC

Functional overview

3.16.2

3.16.3

3.16.4

3.16.5

TIM2, TIM3, TIM4, TIM5 all have independent DMA request generation.

These timers are capable of handling quadrature (incremental) encoder signals and the

digital outputs from 1 to 3 hall-effect sensors.

TIM10, TIM11 and TIM9

TIM10 and TIM11 are based on a 16-bit auto-reload upcounter. TIM9 is based on a 16-bit

auto-reload up/down counter. They include a 16-bit prescaler. TIM10 and TIM11 feature one

independent channel, whereas TIM9 has two independent channels for input capture/output

compare, PWM or one-pulse mode output. They can be synchronized with the TIM2, TIM3,

TIM4, TIM5 full-featured general-purpose timers.

They can also be used as simple time bases and be clocked by the LSE clock source

(32.768 kHz) to provide time bases independent from the main CPU clock.

Basic timers (TIM6 and TIM7)

These timers are mainly used for DAC trigger generation. They can also be used as generic

16-bit time bases.

SysTick timer

This timer is dedicated to the OS, but could also be used as a standard downcounter. It is

based on a 24-bit downcounter with autoreload capability and a programmable clock

source. It features a maskable system interrupt generation when the counter reaches 0.

Independent watchdog (IWDG)

The independent watchdog is based on a 12-bit downcounter and 8-bit prescaler. It is

clocked from an independent 37 kHz internal RC and, as it operates independently of the

main clock, it can operate in Stop and Standby modes. It can be used either as a watchdog

to reset the device when a problem occurs, or as a free-running timer for application timeout

management. It is hardware- or software-configurable through the option bytes. The counter

can be frozen in debug mode.

Window watchdog (WWDG)

The window watchdog is based on a 7-bit downcounter that can be set as free-running. It

can be used as a watchdog to reset the device when a problem occurs. It is clocked from

the main clock. It has an early warning interrupt capability and the counter can be frozen in

debug mode.

3.17

3.17.1

Communication interfaces

I²C bus

Up to two I²C bus interfaces can operate in multimaster and slave modes. They can support

standard and fast modes.

They support dual slave addressing (7-bit only) and both 7- and 10-bit addressing in master

mode. A hardware CRC generation/verification is embedded.

They can be served by DMA and they support SM Bus 2.0/PM Bus.

DocID022799 Rev 13

29/136

51

Share Link: