AT91SAM7X128B-CU(2009) View Datasheet(PDF) - Atmel Corporation

Part Name

Description

MFG CO.

AT91SAM7X128B-CU
(Rev.:2009)

AT91 ARM Thumb-based Microcontrollers

Atmel Corporation 

AT91SAM7X512/256/128 Preliminary

– Higher priority interrupts can be served during service of lower priority interrupt

• Vectoring

– Optimizes interrupt service routine branch and execution

– One 32-bit vector register per interrupt source

– Interrupt vector register reads the corresponding current interrupt vector

• Protect Mode

– Easy debugging by preventing automatic operations

• Fast Forcing

– Permits redirecting any interrupt source on the fast interrupt

• General Interrupt Mask

– Provides processor synchronization on events without triggering an interrupt

9.5 Debug Unit

• Comprises:

– One two-pin UART

– One Interface for the Debug Communication Channel (DCC) support

– One set of Chip ID Registers

– One Interface providing ICE Access Prevention

• Two-pin UART

– USART-compatible User Interface

– Programmable Baud Rate Generator

– Parity, Framing and Overrun Error

– Automatic Echo, Local Loopback and Remote Loopback Channel Modes

• Debug Communication Channel Support

– Offers visibility of COMMRX and COMMTX signals from the ARM Processor

• Chip ID Registers

– Identification of the device revision, sizes of the embedded memories, set of

peripherals

– Chip ID is 0x275C 0A40 (VERSION 0) for AT91SAM7X512

– Chip ID is 0x275B 0940 (VERSION 0) for AT91SAM7X256

– Chip ID is 0x275A 0740 (VERSION 0) for AT91SAM7X128

9.6 Periodic Interval Timer

• 20-bit programmable counter plus 12-bit interval counter

9.7 Watchdog Timer

• 12-bit key-protected Programmable Counter running on prescaled SLCK

• Provides reset or interrupt signals to the system

• Counter may be stopped while the processor is in debug state or in idle mode

29

6120H–ATARM–17-Feb-09

Share Link: