STV2247H(2009) View Datasheet(PDF) - STMicroelectronics

Part Name

Description

MFG CO.

STV2247H
(Rev.:2009)

I²C bus-controlled multistandard single chip TV processor

STMicroelectronics 

STV224X, STV228X, STV223X - I²C BUS SELECTION

Reg.

Addr

(Hex)

Description

Data

Bits

d7 d6 d5 d4 d3 d2 d1 d0

Comments

06

PIF VCO Compen-

sation

1

X X X X X X X 0 0 = Optimized for PIF from 33.9 to 38.9 MHz

X X X X X X X 1 1 = Optimized for PIF 45.75 & 58.75 MHz

Sound Standard

Selection

2 X X X X X 0 0 X 6.5 MHz sound selected.

X X X X X 0 1 X 6.0 MHz sound selected.

X X X X X 1 0 X 5.5 MHz sound selected.

X X X X X 1 1 X 4.5 MHz sound selected.

AGC SIF time

1 X X X X 0 X X X 0 = Auto Time constant.

constant (AM)

X X X X 1 X X X 1 = Fast Time constant forced.

SAW filter switch 1 X X X 0 X X X X 0 = output low (0.4 V Max.).

output

X X X 1 X X X X 1 = output high (4 V Min.).

CVBS output

(from PIF circuit)

QSS/Inter-carrier

) Application

t(s Not to be used

1

X X 0 X X X X X 0 = CVBS output enable.

X X 1 X X X X X 1 = CVBS output muted.

1

X 0 X X X X X X 0 = QSS application, intercarrier filter OFF

X 1 X X X X X X 1 = Intercarrier application

1 0XXXXXXX

c 6.3.6 Video Controls

du Reg.

Addr

ro (Hex)

Description

Data

Bits

d7 d6 d5 d4 d3 d2 d1 d0

Comments

P 07 Contrast Control

6 X X 0 0 0 0 0 0 -24 dB gain (Min. contrast).

X X 1 1 1 1 1 1 0 dB gain (Max. contrast).

lete RGB Peak

so Limitation

0 = APR, APR Threshold, tracked with contrast.

1 X 0 X X X X X X 1 = RGB Peak Limitation, threshold not tracked with

X 1 X X X X X X contrast.

Note: RGB Peak Limitation active when WR10 d0 =

1

b Blue Screen

O Feature

1 0 X X X X X X X 0 = Blue screen OFF.

1 X X X X X X X 1 = Blue screen ON.

- 08

Saturation Control

6

X X 0 0 0 0 0 0 -40 dB gain (Min. saturation).

X X 1 1 1 1 1 1 +9 dB gain (Max. saturation).

) Half Contrast Ena- 1 X 0 X X X X X X 0 = Disabled.

t(s ble

X 1 X X X X X X 1 = Enabled.

Oversize Blanking 1 0 X X X X X X X 0 = Disabled.

c Enable

1 X X X X X X X 1 = Enabled.

du 09

Brightness Control

6

X X 0 0 0 0 0 0 -30% of B/W at Max. contrast.

X X 1 1 1 1 1 1 +30% of B/W at Max. contrast.

ro RGB Blanking

1 X 0 X X X X X X 0 = Not active (normal operation).

X 1 X X X X X X 1 = Active.

bsolete P Cut-off Blanking

1 0 X X X X X X X 0 = Enable: RGB output blanked when ICATH voltage

is far from internal cut-off reference (cut-off loop not

locked), during IC start-up.

1 X X X X X X X 1 = Disable: RGB output not blanked by cut-off loop.

49/86

Share Link: