STM32F030FCP6TR(2015) View Datasheet(PDF) - STMicroelectronics

Part Name

Description

MFG CO.

STM32F030FCP6TR
(Rev.:2015)

Value-line ARM®-based 32-bit MCU with up to 256-KB Flash, timers, ADC, communication interfaces, 2.4-3.6 V operation

STMicroelectronics 

Electrical characteristics

STM32F030x4/6/8/C

6.3.3

6.3.4

6.3.5

Embedded reset and power control block characteristics

The parameters given in Table 23 are derived from tests performed under the ambient

temperature and supply voltage conditions summarized in Table 21: General operating

conditions.

Table 23. Embedded reset and power control block characteristics

Symbol

Parameter

Conditions

Min Typ Max Unit

VPOR/PDR(1)

Power on/power down

reset threshold

Falling edge(2)

Rising edge

1.80 1.88 1.96(3) V

1.84(3) 1.92 2.00

V

VPDRhyst PDR hysteresis

tRSTTEMPO(4) Reset temporization

-

40

-

mV

1.50 2.50 4.50 ms

1. The PDR detector monitors VDD and also VDDA (if kept enabled in the option bytes). The POR detector

monitors only VDD.

2. The product behavior is guaranteed by design down to the minimum VPOR/PDR value.

3. Data based on characterization results, not tested in production.

4. Guaranteed by design, not tested in production.

Embedded reference voltage

The parameters given in Table 24 are derived from tests performed under the ambient

temperature and supply voltage conditions summarized in Table 21: General operating

conditions.

Table 24. Embedded internal reference voltage

Symbol

Parameter

Conditions

Min Typ Max Unit

VREFINT Internal reference voltage –40 °C < TA < +85 °C 1.16 1.2 1.24(1) V

tS_vrefint

ADC sampling time when

reading the internal

reference voltage

-

5.1 17.1(2) μs

ΔVREFINT

Internal reference voltage

spread over the

temperature range

VDDA = 3 V

-

- 10(2) mV

TCoeff

Temperature coefficient

- 100(2) - 100(2) ppm/°C

1. Data based on characterization results, not tested in production.

2. Guaranteed by design, not tested in production.

Supply current characteristics

The current consumption is a function of several parameters and factors such as the

operating voltage, ambient temperature, I/O pin loading, device software configuration,

operating frequencies, I/O pin switching rate, program location in memory and executed

binary code.

The current consumption is measured as described in Figure 13: Current consumption

measurement scheme.

46/96

DocID024849 Rev 2

Share Link: