SIL06C-05SADJ-VJ View Datasheet(PDF) - Emerson Network Power
Part Name
Description
MFG CO.
SIL06C-05SADJ-VJ Datasheet PDF : 3 Pages
| |||
SIL06C Series
5 Vin and 12 Vin single output
DC-DC CONVERTERS C Class Non-isolated
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
2
NEW Product
OUTPUT
POWER
(MAX.)
INPUT
VOLTAGE
20 W 4.5-5.5 Vdc
30 W 10.2-13.8 Vdc
OVP
N/A
N/A
OUTPUT
OUTPUT CURRENT
VOLTAGE(12) (MIN.)
0.9-3.3 Vdc
0A
0.9-5.0 Vdc
0A
OUTPUT
CURRENT
(MAX.)
6A
6A
EFFICIENCY
(TYP.)
89%
91%
REGULATION
LINE LOAD
MODEL
NUMBER (5,13,14,15)
±0.2%
±0.2%
±0.5% SIL06C-05SADJ-VJ
±0.5% SIL06C-12SADJ-VJ
Part Number System with Options
SIL06C-12SADJ-VJ
Product Family
SIL = Single in Line
Packaging Options (14)
J = Pb-free (RoHS 6/6 compliant)
Rated Output Current
06 = 6 Amps
Performance
C = Cost Optimised
Mounting Option
V = Vertical Mount
H = Horizontal Mount
Number of Outputs
SADJ = Single Adjustable Output
Input Voltage
05 = 4.5 Vdc to 5.5 Vdc
12 = 10.2 Vdc to 13.8 Vdc
Output Voltage Adjustment of the SIL06C Series
The ultra-wide output voltage trim range offers major advantages to users who
select the SIL06C series. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SIL06C series converter
leaves the factory the output has been adjusted to the default voltage of 0.9 V
Notes
1 di/dt = 10 A/µs, Vin = Nom, Tc = 25 °C, load change = 0.5 lo max. to
0.75 lo max. and 0.75 lo max. to 0.5 lo max.
2 Measured with external filter. See Application Note 131 for details.
3 Power up is the time from application of dc input to Power Good
enabled. Remote ON/OFF is from ON/OFF asserted high to Power Good
enabled
4 This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
5 The standard unit with the suffix '-V' is for vertical mounting. To order a
unit with horizontal mounting, please add the suffix '-H' to the model
number, e.g. SIL06C-05SADJ-HJ.
6 Measured as per recommended set-up. Cin = 270 µF (20 mΩ esr max.).
Cout = 680 µF (10 mΩ esr max.).
7 Uses external resistor from trim to output ground. Minimum value 485 Ω
for 5 V model, 280 Ω for 12 V model. See Applications Note 131 for
details.
Ripple and Noise Specification
Model
5 V input models
12 V input models
Output
Voltage
0.9-2.5 Vdc
3.3 Vdc
0.9-2.5 Vdc
3.3-5 dcV
Pk - Pk
30 mV
40 mV
40 mV
50 mV
RMS
15 mV
15 mV
20 mV
20 mV
Notes condt.
8 Signal line assumed <3 m.
9 External input fusing recommended.
10 See Application Note 131 for operation above 50 ºC.
11 See Application Note 131 for more details.
12 These models have a wide trim output. 5 Vin has an output of 0.9 Vdc to
3.3 Vdc and 12 Vin has an output of 0.9 Vdc to 5 Vdc. An external
resistor adjusts the output voltage.
13 To order a unit with a pin length of 0.150”, please add suffix ‘P4’ to the
model number, e.g. SIL06C-05SADJ-HP4J.
14 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
15 NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool
at http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
File Name: sil06c.pdf Rev (02): 16 Dec 2005
Share Link: 