SC403BEVB View Datasheet(PDF) - Semtech Corporation
Part Name
Description
MFG CO.
SC403BEVB Datasheet PDF : 32 Pages
| |||
SC403B
Absolute Maximum Ratings
LX to PGND (V). . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to +30
LX to PGND (V) (transient — 100ns max.) . . . . . . . -2 to +30
VIN to PGND (V). . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to +30
EN/PSV, PGOOD, ILIM, to GND (V). . . . . . -0.3 to +(VDD + 0.3)
SS, VOUT, FB, FBL, to GND (V). . . . . . . . . . -0.3to +(VDD+0.3)
VDD to PGND (V) . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to +6
TON to AGND (V). . . . . . . . . . . . . . . . . . . . . -0.3 to +(VDD - 1.5)
ENL (V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to VIN
BST to LX (V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to +6.0
BST to PGND (V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to +35
AGND to PGND (V). . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to +0.3
ESD Protection Level(1) (kV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Recommended Operating Conditions
Input Voltage (V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0 to 28
VDD to PGND (V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0 to 5.5
VOUT to PGND (V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.6 to 5.5
Thermal Information
Storage Temperature (°C). . . . . . . . . . . . . . . . . . . . . -60 to +150
Maximum Junction Temperature (°C). . . . . . . . . . . . . . . 150
Operating Junction Temperature (°C). . . . . . -40 to +125
Thermal resistance, junction to ambient (2) (°C/W)
High-side MOSFET. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Low-side MOSFET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
PWM controller and LDO thermal resistance . . . . . . 36
Peak IR Reflow Temperature (°C). . . . . . . . . . . . . . . . . . . . 260
Exceeding the above specifications may result in permanent damage to the device or device malfunction. Operation outside of the parameters
specified in the Electrical Characteristics section is not recommended.
NOTES:
(1) Tested according to JEDEC standard JESD22-A114.
(2) Calculated from package in still air, mounted to 3 x 4.5 (in), 4 layer FR4 PCB with thermal vias under the exposed pad per JESD51 standards.
Electrical Characteristics
Unless specified: VIN =12V, TA = +25°C for Typ, -40 to +85 °C for Min and Max, TJ < 125°C, VDD = +5V, per applicable Detailed Application Circuit
Parameter
Conditions
Min Typ Max Units
Input Supplies
VIN UVLO Threshold)
Sensed at ENL pin, rising edge
Sensed at ENL pin, falling edge
2.40 2.60 2.95
V
2.235 2.40 2.565
VIN UVLO Hysteresis
EN/PSV = High
0.2
V
VDD UVLO Threshold
Measured at VDD pin, rising edge
2.5
Measured at VDD pin, falling edge
2.4
3.0
V
2.9
VDD UVLO Hysteresis
0.2
V
VIN Supply Current
ENL , EN/PSV = 0V, VIN = 28V
Standby mode; ENL=VDD, EN/PSV = 0V
8.5
20
μA
130
Share Link: 